• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.485-490
• /
• 2004

Sawtooth mixing device used in a non-premixed burner is evaluated for flame stabilization and NO$_{x}$ reduction. Three mixers with different blade angles are tested. Methane is delivered through the fuel jet and air passes through the co-flow annulus. The flame mode changes (attached flame, lifted flame and extinction) against the fuel flow speed are measured, and the stability diagram is drawn. Moreover, by traversing thermocouple and sampling probe in the flame, the distribution of temperature and NO$_{x}$ mole fraction are measured. With the change in blade angle, flame shape, flame stabilization, the distribution of temperature and NO$_{x}$ mole fraction are changed considerably.rably.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.40-49
• /
• 2016

본 연구의 목적은 저선회 모델 연소기에서 저선회 연소의 특성을 확인하는 것이다. 이를 위해 선회각도에 따른 화염의 형상 및 안정화 영역, 배기성능에 대한 평가가 실험적으로 수행되었다. 저선회 연소의 큰 특징은 화염이 부상되어 존재하게 되는데, 이러한 부상화염은 확대유동과 예혼합 화염의 전파특성이 절묘하게 결합되어 발생하게 된다. 본 연소기에서 이러한 부상화염의 특징을 속도 유동장을 통하여 확인하였으며 화염을 가시화하여 나타내었다. 가시화된 화염은 열용량과 당량비에 따라 분류하였다. 선회각도의 변화에 따른 연구를 통해 선회각도만으로도 희박 가연한계를 확장시킬 수 있음을 보였다. 또한 선회각도가 증가할수록 혼합이 향상되고 체류시간이 짧아져 NOx와 CO의 배출이 감소되는 것으로 확인되었다.

• 한국항공우주학회지
• /
• 제36권10호
• /
• pp.1011-1016
• /
• 2008

KIVA3V를 이용하여 모형 가스터빈 연소기에서 Jet-A의 분무와 연소에 관한 수치해석을 하였다. 연소기 형상은 6개의 희석홀을 가지며, 스월효과를 고려하였다. 연소 특성을 해석하기 위해 열적 NO 발생을 고려하였다. 다양한 분무각에 대해서 Jet-A 증기, 화염온도 분포와 NO 발생량에 대하여 비교하였다. 분무각이 커질수록 1차 영역에서 연료 증기가 비교적 고르게 나타나게 되며 증발이 더욱 빠르게 되고, 주변 기체와 연료 증기 사이의 혼합이 증가한다. 그 결과 고온부가 넓게 나타나게 되고, 이에 의해 열적 NO 발생이 증가한다.

• 한국연소학회지
• /
• 제8권4호
• /
• pp.15-23
• /
• 2003

The zone conditional two-fluid equations are derived and validated against DNS database of a premixed turbulent flame. The conditional statistics of major flow variables are investigated to understand the mechanism of flame generated turbulence. The flow field in burned zone shows substantially increased turbulent kinetic energy, which is highly anisotropic due to reaction kinematics across thin f1amelets. The transverse component may be larger than the axial component for a distributed pdf of the flamelet orientation angle, while the opposite occurs due to redistribution of turbulent kinetic energy and flamelet orientation normal to the flow at the end of a flame brush. The major source or sink terms of turbulent kinetic energy are the interfacial transfer by the mean reaction rate and the work terms by fluctuating pressure and velocity on a flame surface. Ad hoc modeling of some interfacial terms may be required for further application of the two-fluid model in turbulent combustion simulations.

• 항공우주기술
• /
• 제6권2호
• /
• pp.14-20
• /
• 2007

본 연구에서는 램제트 엔진의 연소기용 제트분사식 화염안정기의 특성을 분석하였다. 제트화염안정기는 분사각 및 제트운동량 변화를 통하여 화염을 손쉽게 제어할 수 있으며 별도의 열손상방지장치를 장착하지 않아도 된다는 장점이 있다. 또한 제트류와 주류간의 난류혼합효과로 인해 기계식 화염안정기보다 더 뛰어난 화염안정효과를 보였다. 이러한 제트화염안정기는 램 제트엔진의 제어성능을 더욱 향상시킬 수 있을 것이다.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.493-502
• /
• 2012

Syngas laminar burning velocity measurements were carried out at atmospheric pressure and ambient temperature using the Bunsen flame configuration with nozzle burner as a fundamental study on flame stability of syngas fuel. Representative syngas mixture compositions ($H_2$:CO) such as 25:75%, 50:50% and 75:25% and equivalence ratios from 0.5 to 1.4 have been conducted. Average laminar burning velocities have been determined by the stabilized nozzle burner flames using the angle method, radical surface area method and compared with the data obtained from the other literatures. And the results of each experimental methodologies in the various composition ratios and equivalence ratios were coincided with the result of numerical simulation. Especially, it was confirmed that there was necessary to choice a more accurate measurement methodology even the same static flame method for the various composition ratios of syngas fuel including hydrogen. Also, it was reconfirmed that the laminar burning velocities gradually increased with the increasing of hydrogen content in a fuel mixture.

• 한국연소학회지
• /
• 제1권1호
• /
• pp.11-18
• /
• 1996

The stabilization characteristics of diffusion flame formed behind a bluff body with fuel injection slits was experimentally investigated by varying main fuel injection angles and auxiliary fuel injection conditions. The flame stability limits, temperature and length of recirculation zone, direct and schlieren photographs of flames were measured in order to study the stabilization mechanism of the diffusion flame. The results of this investigation are as follows. The stability limits can be improved by the condition of the kind and quanity of the injected auxiliary fuel. The length and temperature decrease with injection of auxiliary fuel, and these phenomena are remarkable when LPG is injected into the recirculation zone. When the LPG is injected into the recirculation zone, flame remains sooty. Fluctuation of fuel and main stream is generated actively by air injection.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.75-90
• /
• 2001

For the purpose of helping development of a GDI(Gasoline Direct Injection) engine, the in-cylinder phenomena, such as the spray behaviors and fuel distributions, unburned fuel, and flame characteristics were investigated in a single cylinder GDI engine. The GDI engine was equipped with a swirl type electronic injector and SCV(Swirl Control Valve). PLIF(Planar Laser Induced Fluorescence) system with KrF Excimer laser was used for the measurements of the fuel distributions. The effects of the injector specifications, such as the spray cone angle and the offset angle on the fuel distributions and combustion characteristics were investigated. As a result, it was found that the injected fuel spray collided with the bottom of the bowl and moved upward along the exhaust side wall of the piston bowl. This fuel vapor played a important role in the instance of spark ignition. The injector specifications has a great influence on the flame characteristics.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.377-380
• /
• 2007

스월 난류연소기에서의 혼합기 유입온도와 스월세기에 따른 연소불안정 발생 메커니즘 알아보기 위하여 Large Eddy Simulation을 수행하였다. 스월각 45도 경우 연료공기 혼합기의 온도를 600K에서 660K으로 증가시켰을 경우 화염분기(Bifurcation)현상이 관찰되었고, 스월 강도가 변할 경우 온도와 관계없이 화염분기가 일어나거나 그렇지 않음을 확인하였다. 벽면근처의 혼합가스 유동속도와 화염속도간의 상관관계는 화염분기현상의 발생에 주요한 인자임을 확인하였다.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1692-1701
• /
• 2001

This study describes the combustion characteristics under various condition of air excess ratio and ignition timing in a 2-valve SI optically accessible engine with swirl control valve(SCV). It adapted three different types of SCV(open ratio 72.5%, 78%, 59%) to strengthen a swirl flow. Pressure data were acquired using pressure sensor to investigate the effect of swirl flow on combustion, and from these pressure data, IMEP(indicated mean effective pressure) and MFB(mass fraction burnt) were calculated to explain burn rate and flame speed. From acquired flame images, we inspected the flame propagation direction, flame area, and flame centroid. Flame propagation direction showed different tendency between with/without SCV, and flame area with SCV was faster and larger than that of conventional engine. Finally, the representative flame images at each crank angle were acquired by PDF method to verify flame growth process. It is found that strengthened swirl flow is more beneficial for faster and stable combustion.