• 한국치위생학회지
• /
• 제4권1호
• /
• pp.49-64
• /
• 2004

This study is designed to conduct a questionnaire research into the safety control and the actual condition of radiography by working with dentistry belonging to university hospitals, dental hospitals and dental clinics for three months ranging from August, 2003 to October, 2003. The researcher came to the following conclusions. 1. The research on the current condition of possessed radiational equipment shows that 61.2 percent of the subjects had one intraoral radiation medicine and that 70.1 percent of the subjects had more than one extraoral radiation medicine and that 37.3 percent of the subjects had more than one digital radiation medicine. 2. Most of intraoral radiography (82.1%) was conducted by dental hygienists, and 7.5 percent of intraoral radiography was conducted by nurse aids. On the other hand, most of extraoral radiography (76.6%) was conducted by dental hygienists and digital radiography was conducted by dental hygienists(60.6%), dentists(32.0%) and radiographer(80.0%). 3. The less-than 1-meter-long distance between cone and the radiographer accounted for 44.8 percent. And the more-than 1.6-meter-long distance accounted for no more than 13.4 percent. The exposure time per standard film which was adjusted to each part accounted for 71.6 percent. Fixing the film on the part of healthy patients accounted for 76.1 percent. Fixing the film of elderly patients and children patients by the radiographer accounted for 43.3 percent. 4. The average daily photographing frequency of standard films stood at six to ten pieces(31.3%), and the average weekly photographing frequency of bitewing films stood at less than one piece(47.8%), and the dentistries where bitewing films were not employed accounted for 25.4%. The subjects whose average weekly photographing freqeuncy of occlusal films stood at less than a piece accounted for 59.7 percent. The dentistries whose average weekly photographing frequency of pediatric films stood at one to five pieces accounted for 41.8 percent. In case of panorama & cephalo, one to five pieces on a weekly average accounted for 36.2 percent. The dentistries whose average daily photographing frequency of digital radiation medicine stood at less than 1 piece accounted for 40.0 percent. 5. The research on the use of protective clothes shows that pregnant ·women only accounted for 31.3 percent. In regard to the use of protective clothes in case of the radiographers fixing films, the cases where no protective clothes were employed accounted for 88.1 percent. The reason was said to he attributable to the trouble related to wearing the clothes(54.2%). 6. The survey on the measurement of exposure dose shows that the cases where no measurement was made accounted for 76.1 percent. As far as the measurement methods of exposure dose was concerned, the employment of film badge accounted for 68.8 percent. The subjects turned out to conduct measurement of exposure dose every third month, which accounted for 43.8 percent. The barriers to the measurement of measurement of exposure dose were attributable to the recognition that a little amount of exposure dose need not be measured(29.9%). 7. The survey on the distinction of radiation rooms and clinic rooms reveals that the cases where radiation rooms exclusively existed accounted for 67.2 percent. 43.3 percent of the subjects turned out to have only one protective garment, and 49.3 percent of the subjects proved to conduct a periodical checkup of radiational equipment. The survey on the examination certificates of radiational generators and protective facilities indicates that 80.6 percent of the subjects had the certificates. The research also shows that the subjects with the marks indicating the radiational areas accounted for 70.1 percent. And trustees turned out to handle developing solutions and fixing solutions.

• 한국축산시설환경학회지
• /
• 제4권2호
• /
• pp.97-104
• /
• 1998

In order to advise how to solve the problems and suggest on the mechanization of beef farm, the facilities and equipment for feeding and supplying water to the animals and transporting manure, and farm machineries of sixty-seven beef cattle farms in western Chungnam Province were surveyed. The results are as follows; 1. The proportions of number of heads per farm for above 70, 50∼70, 30∼50, 10∼30 and below 10 heads were 26, 18, 29, 13 and 13, respectively. The farms with the annual income more than 30 million won are consisted of 67.6% of the farms surveyed which showed to be higher than national average. 2. Only 19% of farms had automatic feeding system. Water was supplied by water cup(45%), opening and shutting water tab(27.6%) and bucket. 3. Cattle manure was transported by manpower (46%) by loader (34%) and by gravitational flow (14%). Most of manure(97%) was composted after treatment of drying or piling up outside. 4. More instruction and education were required because of the insufficient routine checking and fixing for farming machines, and unsystematic education for learning skills. 5. 65% of farms felt unsatisfied about after service(A/S) for their machinery. The main reason why the farmers were not satisfied was that it took too much time to be repaired. 6. When the farms purchased facilities, equipment and machinery, they did not analyze economic value of them and keep a diary. To make effective use of machines, the most available model for purchasing and managing of machines must be developed and applied to various scales of management.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.26-29
• /
• 2017

한국형발사체를 독자개발하기 위한 연구개발이 한국항공우주연구원을 중심으로 2010년 이후 수행 중에 있다. 발사대 장비 중 발사체고정장치는 발사체를 발사패드 위에 수직으로 기립시킨 후 발사체 하부를 고정하여 풍하중 등 외부 하중으로부터 발사체를 견고하게 고정하는 장치로, 발사체 1단 엔진 점화 후 발생된 추력이 발사체의 이륙중량을 초과되어 이륙이 시작하는 발사초기에 다른 지상장비들과 마찬가지로 발사체 이륙에 간섭이 되지 않도록 고정장치를 빠르게 해제 하여야 한다. 파이로밸브는 발사체고정장치를 구성하는 핵심 구성품의 하나로 발사체 단분리 장치 및 위성 분리장치 등에도 적용하는 유사기능부품으로 높은 신뢰도과 빠른 응답특성을 가져야 한다. 본 논문내용을 통해 발사체고정장치용 파이로밸브 개발과정과 한국형발사체에 대한 전반적인 이해의 폭을 넓히고자 한다.

• 한국기계가공학회지
• /
• 제18권9호
• /
• pp.29-35
• /
• 2019

The structure of the machinery industry due to the 4th industrial revolution is changing from precision and durability to intelligent and smart machinery through sensing and interconnection(IoT). There is a growing need for research on prognostics and health management(PHM) that can prevent abnormalities in processing machines and accurately predict and diagnose conditions. PHM is a technology that monitors the condition of a mechanical system, diagnoses signs of failure, and predicts the remaining life of the object. In this study, the vibration generated during machining is measured and a classification algorithm for normal and fault signals is developed. Arbitrary fault signal is collected by changing the conditions of un stable supply cutting oil and fixing jig. The signal processing is performed to apply the measured signal to the learning model. The sampling rate is changed for high speed operation and performed machine learning using raw signal without FFT. The fault classification algorithm for 1D convolution neural network composed of 2 convolution layers is developed.

• 한국항행학회논문지
• /
• 제25권1호
• /
• pp.78-83
• /
• 2021

급속도로 증가하는 항공 교통량으로 인한 공역 과밀화와 공역제한으로 인해 국제민간항공기구(ICAO) 에서는 공역 수용 증대를 위한 performance-based navigation 을 실시하기 위해 2025년 까지 모든 항공기들을 대상으로 하여 SBAS 사용을 촉구하고 있는 실정이다. 이에 맞춰 국내 역시 한국의 공역환경 특성을 반영한 한국형 SBAS의 연구 개발을 지속중이다. 국내에서는 아직 SBAS의 성능 시험 및 검증을 위한 비행검사 절차 및 이에 필요한 탑재장비 구성방안이 수립되어 있지 않으므로 본 논문에서는 FAA, ICAO 규정집, 그리고 국토교통부가 제정한 법령을 분석하여 향후 수립될 한국형 SBAS의 필수 평가 사항들과 파라미터들을 도출하고, RTCA 규정집을 참고하여 RTK-DGPS 위치고정 시스템을 이용한 비행검사 최적 장비 구성방안에 대해 제시하였다.

• 한국응급구조학회지
• /
• 제7권1호
• /
• pp.179-198
• /
• 2003

If see disaster administration system of our country, start in terms of is coping by countermeasure after four immediately after disaster occurrence many problems blessing with a sons by tribe and so on of link nature between formation, disaster administration complete charge utensil's absence, disaster charge manpower and budget be indicated and join. If examine improvement way accordingly, is as following ; Necessity of synthetic disaster administration system, Fire fighting formation's independence guarantee, Integration of fire fighting connection similarity business, Disaster administration's permanent establishment complete charge utensil's necessity, Disaster administration midautumn complete charge utensil at a metropolitan autonomous fire fighting system reorganization, Role division of labor between center and local government, Disaster administration professional human strength positivity, Disaster administration information system construction practical use, Equipment and improvement of budget state, Education public information for safety culture consciousness fixing, Internationalization of fire fighting business, globalization propulsion, Structure, member of rescue confrontation system and efficiency. Fire fighting environment is changing greatly, and fire fighting must become center to correspond to do confrontation that do one thing troble when produce disaster.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1962-1969
• /
• 2008

According to the increase of power demand and expansion of downtown, it is necessary to install transformers additionally in operating substations and construct substations in residential area. But the public complaint is increased due to the transformer noise of the substation. KEPCO has used a vibration preventing pad, various soundproof walls and an encloser to transformers in outdoor substations, and a soundproof door, shutter and wind-path soundproof equipment in indoor substations to block the sound propagation of the transformers. But these noise reduction methods are not satisfied. It should be considered to reduce transformer noise itself. In this paper, we investigated core noise reduction techniques to develope a low noise transformer. The techniques to reduce core noise of the transformer are application of high permeability grain oriented silicon sheets, decrease of magnetic flux density of core, application of 6step-lap core stacking method, improvement of core binding method(binding addition, band fixing) and application of rubber damper in oder to reduce transmission of core vibration, etc.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1626-1631
• /
• 2007

The purpose of the study is to simulate the displacement of the LCD glass during process of a large size imprint. During this process, a small temperature variation makes thermal stress, which causes the horizontal variation of mold and glass. During alignment process to fix the LCD glass on a alignment stage, the vertical displacement is made by the absorption pressure and the shear stress. This study simulates the horizontal displacement of mold and glass due to temperature variation, the vertical displacement depending on the shape of absorption surface fixing the LCD glass in the alignment process, and the horizontal and vertical displacement which occurs in the LCD glass at the alignment process. Algor which is a FEM code for a framework simulation was applied. Temperature variation above ${\pm}$ $0.1^{\circ}C$ on mold and glass causes the horizontal displacement of 150nm due to thermal expansion. The vertical displacement due to the circular is ten times of the case of rectangular absorption nozzle. The displacement of the LCD glass in the alignment process is about 49nm.

• 한국정보통신학회논문지
• /
• 제16권11호
• /
• pp.2569-2574
• /
• 2012

초계함(천안함급)에 탑재 된 HMS(Hull Mount Sonar) 장비는 능동모드에 적합하도록 설계 되어 있다. 이에 센서 및 시스템 특성이 어뢰 탐지 주파수 대역에 적당하도록 구성되어 있지는 않다. 이에 초계함에 장착 된 기존 HMS 장비를 이용한 어뢰탐지 기능 구현을 위하여, 초계함 함 별 입력 특성을 분석하고, 입력 주파수 신호에 대한 역보상 회로 설계, 입력 신호 크기에 따른 AGC(Auto Gain Control) 기능 구현 및 함별 신호특성에 따른 대역설정 기능을 통하여 함정 별 특성 및 운용환경 특성에 맞는 어뢰방어시스템을 구현하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.349-352
• /
• 2011

초계함(천안함급)에 탑재 된 HMS(Hull Mount Sonar) 장비는 능동모드에 적합하도록 설계 되어 있다. 이에 센서 및 시스템 특성이 어뢰 탐지 주파수 대역에 적당하도록 구성되어 있지는 않다. 이에 초계함에 장착 된 기존 HMS 장비를 이용한 어뢰탐지 기능 구현을 위하여, 초계함 함 별 입력 특성을 분석하고, 입력 주파수 신호에 대한 역보상 회로 설계, 입력 신호 크기에 따른 AGC(Auto Gain Control) 기능 구현 및 함별 신호특성에 따른 대역설정 기능을 통하여 함정 별 특성 및 운용환경 특성에 맞는 어뢰방어시스템을 구현한다.