• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1135-1141
• /
• 2006

Air foil bearing supports the rotating journal using hydrodynamic force generated at thin air film. The bearing performance, stiffness, damping coefficient and load capacity, depends on the rotating speed and the performance of the elastic foundation, bump foil. The main focus of this study is to decide the dynamic performance of corrugated bump foil, structural stiffness and Coulomb damping caused by friction between bump foil and top foil/bump foil and housing. Structural stiffness is determined by the bump shape (bump height, pitch and bump thickness), dry-friction, and interacting force filed up to fixed end. So, the change of the characteristics was considered as the parameters change. The air foil bearing specification for analysis follows the general size; diameter 38.1 mm and length 38.1mm (L/D=1.0). The results show that the stiffness at the fixed end is more than the stiffness at the free end, Coulomb damping is more at the fixed end due to the small displacement, and two dynamic characteristics are dependent on each other.

• 인터넷정보학회논문지
• /
• 제6권5호
• /
• pp.45-56
• /
• 2005

컴퓨터 네트워크의 확대 및 인터넷 이용의 급격한 증가에 따라 네트워크 서비스 품질의 보장과 네트워크의 관리가 어려울 뿐만 아니라 네트워크 보안의 취약성으로 인하여 해킹 및 정보유출 등의 위협에 노출되어 있다. 특히 시스템 침입의 보안 위협에 대한 능동적인 대처 및 침입 이후에 동일하거나 유사한 유형의 사건 발생에 대해 실시간에 대응하는 것이 중요하므로 침임 탐지 시스템에 대한 많은 연구가 진행되고 있다. 본 논문에서는 시스템 호출을 이용하여 이상 침입 탐지 시스템의 성능을 향상시키기 위해, 특징 선택과 가변 길이 데이터를 고정 길이 학습 패턴으로 변환 생성하는 문제를 해결하기 위한 사운덱스 알고리즘을 적용한 신경망 학습을 통하여 이상 침입 탐지의 연구를 하고자 한다. 즉, 가변 길이의 순차적인 시스템 호출 데이터를 사운덱스 알고리즘에 의한 고정 길이의 행위 패턴을 생성하여 역전파 알고리즘에 의해 신경망 학습을 수행하였다. 역전파 신경망 기법을 UNM의 Sendmail Data Set을 이용하여 시스템 호출의 이상 탐지에 적용하여 성능을 검증하였다.

• 한국결정성장학회지
• /
• 제9권3호
• /
• pp.334-338
• /
• 1999

p형 단결정 규소 웨이퍼를 불화수소 용액속에서 전류밀도와 양극반응 시간을 변화시켜 다공질규소를 제작하고, 그 질량을 측정한 후 이 값으로부터 다공도와 쪽거리(fractal) 차원을 계산하였다. 그 결과 양극반응 시간이 일정한 경우 다공도는 전류밀도에 비례하였다. 그리고 전류밀도가 일정한 경우 여러 양극반응 시간의 데이터로부터 얻은 쪽거리 차원은 일정하였다. 또한 쪽거리 차원은 불화수소의 농도 증가에 따라 감소하였다. 이같은 실험결과를 퍼짐한계침전(diffusion limited depostion) 모형으로 계산된 2차원 컴퓨터 시늉내기(simulation) 결과와 비교 분석하였다. 시늉내기 결과 다공도는 퍼짐거리에 비례하였으며, 쪽거리 차원은 퍼짐거리와 반비례하였다. 이때 퍼짐거리는 전류밀도에 비례하고 불화수소의 농도에 반비례하는 물리량이므로 정성적으로 실험결과와 일치하였다. 그러나 쪽거리 차원이 증가함에 따라 다공도가 감소되는 결과는 실험결과와 상반되었다.

• 한국융합학회논문지
• /
• 제7권4호
• /
• pp.181-190
• /
• 2016

The objective of this study is to find the effective stiffness and compressive strengths of a unit-cell pinwheel truss and double pinwheel truss model designed following a double helical geometry similar to that of the DNA (deoxyribonucleic acid) structure in biology. The ideal solution for their derived relative density is correlated with a ratio of the truss thickness and length. To validate the relative stiffness or relative strength, ABAQUS software is used for the computational model analysis on five models having a different size of truss diameter from 1mm to 5mm. Applied material properties are stainless steel type 304. The boundary conditions applied were fixed bottom and 5 mm downward displacement. It was assumed that the width, length, and height are all equal. Consequently, it is found that the truss model has a lower effective stiffness and a lower effective yielding strength.

• 한국수산과학회지
• /
• 제23권6호
• /
• pp.443-450
• /
• 1990

The virtual population analysis technique was applied to the silver croaker, Otolithes argenteus, stock based on length frequency composition, age-length key and nominal catches taken by the trawl fleet and fixed-stake nets in the Kuwait's waters during $1981\~1988$. One-year-old fish was dominant, whereas three-year-old and older fish were at a very low level. Fishing mortality was much higher in the age groups of 2 and 3 than in the others. A strong year-class occurred in 1980 and 1981. Population size of fishable stock markedly decreased from 1982 to 1985 and remained at a low level during $1986\~1987$. The effects of changes in fishing effort showed that an increase in fishing effort would not lead to benefits in yield and would comprise more young and fewer old fish, whereas a reduction in fishing effort to a certain level (by $20\~40\%$ ) from the fishing effort level on the average during $1981\~1988$ could bring some small advantage to the fishery consisting of fewer young and older fish.

• 유공압시스템학회논문집
• /
• 제8권2호
• /
• pp.8-16
• /
• 2011

It is hard and complicated to analytically derive the volumetric-displacement formula of a gerotor pump/motor. Analytical formulas for calculating the volumetric-displacement are derived in this work, which is relatively easy and based upon vane lengths. The vane lengths mean the distances from axis of inner rotor or outer rotor to contact points between inner and outer rotors. Two kinds of formula were studied for two different kinematic motions of rotors. The first one is the case that outer rotor is fixed in space and inner rotor is in mixed motion of planetary revolution and rotation with respect to the spinning axis. And the second is the case that both inner and outer rotors simultaneously rotate. The proposed formula is verified through comparison with volumetric-displacement obtained from numerical CAD calculation.

• 대한산업공학회지
• /
• 제27권2호
• /
• pp.197-202
• /
• 2001

The biomechanical analysis of the load carrying effect on different floor surfaces has been conducted. Four different floor surfaces were prepared for ten subjects with each walking at a fixed velocity(1.33 m/sec) while carrying five different loads. The results showed that because of the significant interaction effect between floor slipperiness and the load carrying task, the load carrying effect should be analyzed according to different levels of the floor slipperiness, especially contaminant floors. On oily surfaces, slip distance(SD) and heel velocity (HV) increased whereas stride length(SL) decreased as load increased. In other words, significantly longer SD, faster HV, and no normal gait were found as load increased. As a result, a different protocol should be applied to measure floor slipperiness on oily floors as compared to dry surfaces for tribological approach.

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.300-306
• /
• 2020

This study analyzes the distributor's inventory model in a two-stage supply chain consisting of the supplier, the distributor and the end customer. The supplier will allow a credit period before the distributor settles the account with him in order to stimulate the demand for the product he produces. It is also assumed that the distributor pays the shipping cost for the order and hence, the distributor's ordering cost consists of a fixed ordering cost and the shipping cost that depend on the order quantity. The availability of the delay in payments from the supplier enables discount of the distributor's selling price from a wider range of the price option in anticipation of increased customer's demand. As a result, the availability of a credit transaction leads to an increase in inventory levels. On the other hand, in the case of deteriorating products in which the utility of the product perish over time, the deterioration rate with time plays a role in reducing inventory levels. In this regard, we analyze the effect of the length of the credit period and the degree of product deterioration on the distributor's inventory level. For the analysis, we formulate the distributor's annual net profit and analyze the effect of the length of credit period and deterioration rate of the product on inventory policy numerically.

• Journal of information and communication convergence engineering
• /
• 제16권1호
• /
• pp.43-47
• /
• 2018

The existing modeling of avalanche dominated breakdown in double gate MOSFETs (DGMOSFETs) is not relevant for 10 nm gate lengths, because the avalanche mechanism does not occur when the channel length approaches the carrier scattering length. This paper focuses on the punch through mechanism to analyze the breakdown characteristics in 10 nm DGMOSFETs. The analysis is based on an analytical model for the thermionic-emission and tunneling currents, which is based on two-dimensional distributions of the electric potential, obtained from the Poisson equation, and the Wentzel-Kramers-Brillouin (WKB) approximation for the tunneling probability. The analysis shows that corresponding flat-band-voltage for fixed threshold voltage has a significant impact on the breakdown voltage. To investigate ambiguousness of number of dopants in channel, we compared breakdown voltages of high doping and undoped DGMOSFET and show undoped DGMOSFET is more realistic due to simple flat-band-voltage shift. Given that the flat-band-voltage is a process dependent parameter, the new model can be used to quantify the impact of process-parameter fluctuations on the breakdown voltage.

• Smart Structures and Systems
• /
• 제18권5호
• /
• pp.1029-1062
• /
• 2016

In this research, the nonlinear free vibration analysis of boron-nitride micro ribbon (BNMR) on the Pasternak elastic foundation under electrical, mechanical and thermal loadings using modified strain gradient theory (MSGT) is studied. Employing the von $K{\acute{a}}rm{\acute{a}}n$ nonlinear geometry theory, the nonlinear equations of motion for the graphene micro ribbon (GMR) using Euler-Bernoulli beam model with considering attached mass and size effects based on Hamilton's principle is obtained. These equations are converted into the nonlinear ordinary differential equations by elimination of the time variable using Kantorovich time-averaging method. To determine nonlinear frequency of GMR under various boundary conditions, and considering mass effect, differential quadrature element method (DQEM) is used. Based on modified strain MSGT, the results of the current model are compared with the obtained results by classical and modified couple stress theories (CT and MCST). Furthermore, the effect of various parameters such as material length scale parameter, attached mass, temperature change, piezoelectric coefficient, two parameters of elastic foundations on the natural frequencies of BNMR is investigated. The results show that for all boundary conditions, by increasing the mass intensity in a fixed position, the linear and nonlinear natural frequency of the GMR reduces. In addition, with increasing of material length scale parameter, the frequency ratio decreases. This results can be used to design and control nano/micro devices and nano electronics to avoid resonance phenomenon.