• 한국음향학회지
• /
• 제22권6호
• /
• pp.489-495
• /
• 2003

예인형 선 배열 소나는 구조적인 특성상 배열 축을 중심으로 대칭적인 빔을 형성하기 때문에 탐지된 표적에 대하여 좌/우 방위 구분에 있어 모호성을 드러낸다. 이러한 예인형 선 배열의 좌/우 구분이 모호한 문제점을 해결하기 위하여 고정형 카디오이드 빔을 적용한 방법이 사용되었다. 하지만 고정형 카디오이드 빔을 사용할 경우 약 11°이내의 영역에서 카디오이드 빔의 후면 이득에 대한 영향을 줄일 수가 없기 때문에 좌/우 분리 성능이 저하된다. 이 문제를 해결하기 위해서 본 논문에서는 적응형 카디오이드 빔을 사용하여 후면 빔의 이득을 줄임으로써 예인형 선 배열의 성능을 향상시켰다.

• 한국해양학회지
• /
• 제17권1호
• /
• pp.19-26
• /
• 1982

12 or 25 hours continuous observations were made for the variations of nutrients and chlorophyll ${\alpha}$ with tidal cycle at a fixed station located at a mid-channel of the Masan Bay. High nitrate concentrations were observed at the time of low tides whereas high phosphate concentrations at the time of high tides. It is suggested that anoxic bottom waters could also be the possible source of high phosphates in the outer bay. Chlorophyll ${\alpha}$ concentrations were related to the nitrates in April and to the phosphates in June and August. The possible role of growth stimulators in causing the extensive blooms of red tide organisms is suggested.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.549-551
• /
• 2004

This paper used OPNET to simulate video streaming service a test IP network and MPLS network with the traffic shaping that have with CQ_ LLQ algorithm, LSP of fixed bandwidth, policy of limitation users and measures parameters such as delay, throughput, packet loss. To verify the performance of video streaming service in IP network and MPLS network, two scenario that have same topology and traffic source. One is the simulation for best-effort service in pure IP network. The other is the simulation for QoS-enabled service in MPLS Network. Based on simulation result, the MPLS network with CQ_ LLQ algorithm and fixed LSP show advantage of the video streaming service QoS, specially delay and packet loss

• 전기학회논문지
• /
• 제59권4호
• /
• pp.686-692
• /
• 2010

This paper analyzes the effect of the STATCOM on the improvement of the Fault Ride Through (FRT) capability of the fixed speed wind turbines(FSWTs). The steady-state models of the wind farm components, such as induction generator, capacitor bank, and the STATCOM, are developed based on the simplified equivalent circuit. Especially, the STATCOM is modeled as a controllable current source and a method that analytically determines the magnitude of the injection current is developed. For the quasi-steady-state(QSS) analysis, the steady-state model of the generator and STATCOM are merged with the dynamic model of drive train. The QSS simulation with the STATCOM shows that the STATCOM can enhance the FRT performance by improving the $W_r-T_e$ characteristics of the FSWTs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1211-1214
• /
• 1998

Real-time implementation of Conjugate-Structure Algebraic CELP(CS-ACELP) is presented. ITU-T Study Group(SG) 15 has standardized the CS-ACELP speech coding algorithm as G.729. A real-time implementation of the CS-ACELP is achieved using 16 bit fixed point DSP16210 Digital Signal Processor (DSP) of Lucent Technologies. The speech coder has been implemented in the bit-exact manner using the fixed point CS-ACELP C source which is the part of the G.729 standard. To provide a multi-channel vocoder solution to digital communication system, we try to minimize the complexity(e.g., MIPS, ROM, RAM) of CS-ACELP. Our speech coder shows 15.5 MIPS in performance which enables 4 channel CS-ACELP to be processed with one DSP16210.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1529-1536
• /
• 2011

Recently, worldwide government policy is pursuing saving energy and preservation. add to this, the solar cells are getting the spotlight nonpolluting energy source, using a variety of products for solar cell. in this paper, we'll make solar tracking system for suitable of dynamic boat. we knew that general boats are using fixed solar cell, it's first time to use tracking system of solar cells for boats so it is hard to application. To solve this problem in this paper we use to a magnetic compass and GPS for suitable solar tracking system of dynamic movement and to analyze fixed and tracking solar system. frist. solar tracking device is designed two-axis control system. one-axis control system is taken a magnetic compass for making efficiency defence solar tracking sensor, two-axis control system apply GPS latitude and longitude data for SPA(Solar position algorithm) so we know the azimuth and altitude. it analyze data value of accuracy comparison from result. so the proposed algorithm confirm to have validity.

• 전자공학회논문지C
• /
• 제34C권10호
• /
• pp.59-66
• /
• 1997

Neural networks has widely been be used for several practical applications such as speech, image processing, and pattern recognition. Thus, a approach to the voltage-controlled current source in areas of neural networks, the key features of CNN in locally connected only to its netighbors. Because the architecture of the interconnection elements between cells in very simple and space invariant, CNNs are suitable for VLSI implementation. In this paper, processing element of digital programmable CNN with variable template memory was implemented using CMOS circuit. CNN PE circuit was designe dto control gain for obtaining the optimal solutions in the CNN output. Performance of operation for 4*4 CNN circuit applied for fixed template and variable template analyzed with the result of simulation using HSPICE tool. As a result of simulations, the proposed variable template method verified to improve performance of operation in comparison with the fixed template method.

• 산업공학
• /
• 제11권1호
• /
• pp.155-163
• /
• 1998

In multiparty multimedia communication, each participant not only receives information from other participants but also generates real-time data streams to distribute to others and therefore the difference between source and destination is not clear in terms of data transmission. During a teleconference session, many sub-multicast trees may be generated to exchange information to specific members within the multicast group and if those sub-multicast trees use the same fixed multicast tree, the blocking probability will be high and it is hard to provide QoS for each sub-multicast group. Also, even though there exits some shortcuts between each sub-multicast group, fixed multicast tree does not allow to use those shortcuts. Thus to overcome these problems. We propose a network resource reservation protocol and show that its effectiveness in terms of blocking probability and network resources usage.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.647-657
• /
• 2011

The present paper proposes a sliding mode control with fixed switching frequency for three-phase three-leg voltage source inverter based four-wire shunt active power filter. The aim is to improve phase current waveform, neutral current mitigation, and reactive power compensation in electric power distribution system. The performed sliding mode for active filter current control is formulated using elementary differential geometry. The discrete control vector is deduced from the sliding surface accessibility using the Lyapunov stability. The problem of the switching frequency is addressed by considering hysteresis comparators for the switched signals generation. Through this method, a variable hysteresis band has been established as a function of the sliding mode equivalent control and a predefined switching frequency in order to keep this band constant. The proposed control has been verified with computer simulation which showed satisfactory results.

• 한국안전학회지
• /
• 제15권3호
• /
• pp.14-22
• /
• 2000

A numerical analysis has been performed on the two-dimensional rectangular gallium melting problem using the enthalpy method. The major advantage of this method is that the physical domain is discretized with fixed grids without transforming variables and the interface conditions of phase change are accounted for the definition of suitable source terms in the governing equations. But in the fixed method, there is some ambiguity in defining the porosity constant which has no physical interpretation. If the velocity correction is included in the momentum equation, for the appropriate range of porosity constant, the realistic predictions are obtained. The object of the present work is to predict the phase change within the molten steel with thin riser slab using the modified enthalpy-porosity method. The computational procedures for predicting velocity and temperature are based on the finite volume method and the non-staggered grid system. The influence of natural convection on the melting process is considered. A comparison with the experimental results shows that the modified method is better than the previous one.