• 제목/요약/키워드: fixed source

검색결과 600건 처리시간 0.029초

전신 방사선조사를 위한 10MV 선형가속기의 선량측정 (The Dosimetric Data of 10 MV Linear Accelerator Photon Beam for Total Body Irradiation)

  • 안성자;강위생;박승진;남택근;정웅기;나병식
    • Radiation Oncology Journal
    • /
    • 제12권2호
    • /
    • pp.225-232
    • /
    • 1994
  • 연구목적 : 전남대학교병원 치료방사선과에서 가동중인 10MV X-ray를 이용하여 전신 방사선 조사에 필요한 기본적인 선량측정자료를 얻고자 하였다. 대상 및 방법 : 환자 전신이 포함될 수 있는 대형조사면을 얻기 위하여 collimator를 완전히 개방하여 조사방향이 수평이 되게 gantry각을 맞추었다. 방사선 선원에서 환자 중심축까지의 거리가 360cm일 때 최대 기하학적 조사면은 $144cm{\times}144cm$이었다. Polystyrene팬텀과 평행평판형 전리함을 이용하여 깊이선량율과 principal 및 diagonal axis에서 측방선량분포를 측정하였다. 또한 1cm두께의 아크릴판을 팬텀의 전면에서 20cm 떨어진 위치에 놓고 표면 선량의 증가와 최대선량점($d_{max}$)의 변화를 측정하였다. SAD 360cm에서 팬텀의 중심에 측정기 위치를 고정시키고 팬텀의 두께를 12cm에서 30cm까지 변화시키면서 MU당 선량율을 측정하였다. 결과 : SSD 345cm, 조사면 크기 $144cm{\times}144cm$의 조건에서 깊이선량율은 10cm 깊이에서 $78.4{\%}$였고, dmax정은 1.8cm이었다. 1cm두께의 아크릴판을 spoiler로 팬텀에서 20cm 띄우고 사용했을 때 dmax점은 1.8cm에서 0.8cm으로 이동하였고, 표면선량은 $61\%$에서 $94\%$로 증가하였다. 평행 2문 조사시 30cm두께의 팬텀에서 선축상 선량분포의 차이는 $7\%$이내였다. $100\%$ 선량점의 선축이탈거리는 principal axis에서 67cm. diagonal axis에서 80cm이었다. 팬텀의 중심에서 측정된 출력계수로 MU당 선량은, (Dose/MU)=$-0.00178{\times}(T/2)+0.08676$ (T:팬텀 두께(Cm))로 표현되는 직선의 관계식을 나타내었다. 결론 : 1)좌우 대향 2문조사 방법으로 30cm두께의 팬텀에 10MV X-ray를 조사하였을 때 선량분포의 차이는 $7\%$이내로 만족스러운 결과를 보였다. 2) 고에너지 광자선으로 전신방사선 조사시 표면선량 증가를 위하여 beam spotter의 사용이 필요할 것으로 사료된다 3) 측방선량분포곡선에서 principal 및 diagonal axis에 따른 선량분포의 차이가 있어 환자 치료시 고려되어야 할 것으로 생각된다 4) 전신방사선조사시 선량분포는 여러 가지 요인에의하여 달라질 수 있기 때문에 직접적인 방법에 의해 측정된 MU당 선량은 깊이와 직선의 관계식을 보여 실제 치료에 적용될 수 있을 것으로 생각된다. 본 연구에서 얻어진 전신 방사선조사에 관한 기본적 선량측정자료는 AAPM보고서 No. 17에서 권장된 범주에 들었으며 향후 임상에 이용될 수 있을 것으로 생각된다.

  • PDF

오일팜 바이오매스의 자원화 연구 V - 오일팜 바이오매스 펠릿의 반탄화 연구 - (Study of Oil Palm Biomass Resources (Part 5) - Torrefaction of Pellets Made from Oil Palm Biomass -)

  • 이지영;김철환;성용주;남혜경;박형훈;권솔;박동훈;주수연;임현택;이민석;김세빈
    • 펄프종이기술
    • /
    • 제48권2호
    • /
    • pp.34-45
    • /
    • 2016
  • Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

Imipramine이 배뇨근 세포의 수축성에 미치는 직접작용 (Effect of Imipramine on the Contractility of Single Cells Isolated from Canine Detrusor)

  • 허찬욱;이광윤;김원준
    • Journal of Yeungnam Medical Science
    • /
    • 제11권2호
    • /
    • pp.293-302
    • /
    • 1994
  • 유뇨증의 치료제로서 널리 사용되고 있는 imipramine의 작용기전에 관한 학설이 여러가지가 있으나 그 중 콜린성수용체 봉쇄작용을 관찰하기 위한 방법으로 평활근 세포를 분리배양하여 단일세포에 대한 acetylcholine의 수축작용과 이에 대한 imipramine의 길항작용을 atropine의 그것과 비교해 보기로 하였다. 개의 방광을 적출하여 $0{\sim}4^{\circ}C$의 K-H 용액내에서 $2{\times}2mm$크기의 평활근 절편을 얻어 $36^{\circ}C$의 collagenase 용액에 넣고 95%/5% $O_2/CO_2$, 혼합산소 공급하에서 17~20분동안 배양하여 분리된 부유세포군을 5 ml test tubes에 나누어 담고 acetylcholine을 $10^{-14}M{\sim}10^{-9}M$의 농도로 첨가하였다. Acrolein 1%를 가하여 수축한 세포를 고정시킨 후, 위상차 현미경에 장착한 CCTV camera로 채취한 영상을 microscaler로 전송하고 monitor상에서 세포의 길이를 측정하였다. 분리된 세포들은 acetylcholine에 의해 5초 이내에 최대 수축을 보였으며 이후 120초까지 수축상태를 지속하였다. Atropine은 acetylcholine 유발 수축을 atropine $10^{-7}M$ 에서부터 농도의존적으로 억제하였으며, imipramine도 acetylcholine 유발수축을 atropine과 같은 경향으로 농도의존적으로 억제하였는데, imipramine $10^{-9}M$의 저농도에서도 유의한 억제를 보였다. 이상의 결과를 종합하면 본 실험에 사용된 조건하에서의 collagense를 이용한 세포 분리법은 단일세포를 대상으로 하는 실험을 위하여 가용한 방법이며, imipramine은 개의 방광평활근 단일세포에서 atropine보다 더 강력한 콜린성 수용체 봉쇄작용을 나타낸다고 생각되었다.

  • PDF

광주 폴리의 기능과 의미에 대한 비판적 재고 - 제 1차 광주폴리를 중심으로 - (A Critical Reconsideration on the Function and Meaning of Follies in Gwangju - Focused on the First Gwangju Follies -)

  • 한성미
    • 한국조경학회지
    • /
    • 제43권6호
    • /
    • pp.41-51
    • /
    • 2015
  • 광주비엔날레를 통해 조성된 폴리는 역사성과 장소성을 강화하고, 공동화 되어가는 구도심을 활성화하는 도시 재생적 목적이었다. 그러나 이러한 애초의 목적과는 달리 옛 읍성 터 가장자리에 조성된 10여개의 폴리는 주변 상인들에게 피해를 주거나, 보행자에게 불편을 초래하며, 활발한 이용 대신 방치되어 있는 등 많은 문제점들을 드러내고 있다. 본 연구는 이러한 부정적 현상에 대한 원인을 파악하고, 폴리와 주변공간을 활성화하여 도시재생의 역할을 수행할 수 있는 방안을 제시하고자 하였다. 연구결과, 각 폴리들 간의 물리적 통일감을 부여하는 맥락이 없으며, 각각의 독립된 작가 중심의 작품으로 주변 환경에 대한 이해의 부족, 그리고 폴리 형성과정에서 시민과의 교감이 부족하였던 것으로 나타났다. 이러한 문제점들을 해소하고, 폴리조성 본래의 목적을 수행할 수 있는 결정적 해법으로써 폴리에 인간의 활동을 적용하는 것이 필요한 것으로 도출되었다. 따라서 본 연구에서는 그러한 인간 활동을 적용하는데 있어서 효과적 방안으로 스트리트 퍼포먼스(street performance)를 제안하였다. 원래 폴리라는 시설물은 어떠한 특정 활동이 정해진 공간이 아니나, 현재와 같이 그것이 이용되지 못하고, 외면 당하거나 방치될 때 스트리트 퍼포먼스의 적용은 부정적으로 문제시 되고 있는 광주폴리에 새로운 관계맺음, 창의적인 활동의 무대, 일상의 공간 등의 영역으로 탈바꿈할 수 있는 실질적인 대안이 될 수 있다. 현재 광주시가 최근 선보인 2차 폴리는 도서관, 화장실과 같은 명확한 목적을 가진 구조물 및 소규모 이동식 포장마차 등으로서 1차 폴리와는 그 성격을 달리하고 있다. 그러나 1차 폴리는 개관을 앞 둔 국립아시아문화전당 주변에 위치하고 있으며, 이동이나 철거가 되지 않고, 일부 폴리는 직접 아시아문화전당을 전망할 수 있는 설치물임에 따라 이들 폴리에 대한 지속적이며 효율적 활용이 필요하다. 또한, 향후 계속될 100여개의 폴리 설치계획에 의미 있는 지침의 역할을 할 것으로 기대한다.

애니메이션 산업의 대안적 연구 - 아바타 서비스의 소비자 고착화(lock-in) 전략을 중심으로 (An alternative way of Animation Industry : Focusing on Avatar sevice's Lock-in Effect)

  • 한창완
    • 만화애니메이션 연구
    • /
    • 통권6호
    • /
    • pp.152-171
    • /
    • 2002
  • This study analyses the avatar service, which is recognized as an alternative strategy of animation industry. The research questions of this study are following: (1) How have the avatar services been developed and what are the present dominant types? (2) Which structural characteristics of e-business environment are needed for the success of avatar services? (3) What is the economic characteristics of avatar business model? To solve these research questions, the basic conditions and the structural characteristics of avatar services have been investigated. In the first place, two forms of avatar service are classified. One is the internet service site whole primary service is to provide chatting service based on avatar service. The other is the portal site in which many kinds of products and services are presented as bundles to meet the needs of internet users. So avatar service is one of bundles which those portal sites are providing with. In this study, the big five internet service sites are selected based on the profits they earned through the sales of avatar service. The result of analysis is that the pricing strategy of those big five sites is very different from those of traditional off-line markets. The pricing mechanism are based on the value which internet users endow with the avatar items, not based on the costs of making the products. Avatar is the representative informative goods. The informative goods have the original cost structures, constant fixed costs and zero marginal costs, so the providers of avatar services make much of the subjective values of consumers. The sayclub, which is the most successful avatar service site and earn the average sales of 3 billing won a month, takes the aggressive strategy of pricing avatar items at highest price in the industry. The avatar service providers which make lots of profits are planning of making differentiate the services, introducing well-known brand items and star-named items. Nevertheless, the fact that the members of the sayclub are not decreasing means that the network effect of the site is so strongly manifest. Moreover, the costs the members have paid for the avatar items are so big not as to switch from one site to the other site, it can be very costly. These switching costs are endemic in high-technology industries and digital contents industries. It can be so large that switching suppliers is virtually unthinkable, a situation known as 'lock-in'. When switching costs are substantial, competition can be intense to attract new customers, since, one they are locked in, they can be a substantial source of profit. The consumers of avatar items have switching costs if they subscribe for the new avatar service site. The switching costs can be subscription costs as well as the costs of giving up the items they already paid for. One common example of switching costs involves specialized supplies, as with inkjet printer cartridges. In this example, the switching cost is the purchase of a new printer. The market is competitive ex ante, but since cartridges are incompatible, it is monopolized dx post. So the providers of printer/cartridges set pricing printer so cheap and cartridges expensive. On the contrary, since the avatar service can be successful with the strong network effect, the providers of avatar services have to compete aggressively for new customers. So they allow the subscription at a low price(almost marginal cost) in the early market. The network effect can be maximized when the members are sufficiently growing. The providers which have the monopoly power with sufficient subscribers. begin to raise the prices over the lifetime of the product and make profits.

  • PDF

SPECT/CT에서 서로 다른 에너지의 방사성동위원소 사용시 영상보정기법의 유용성 평가 (The Evaluation of Image Correction Methods for SPECT/CT in Various Radioisotopes with Different Energy Levels)

  • 신병호;김승정;윤석환;김태엽;임정진;우재룡;오소원;김유경
    • 핵의학기술
    • /
    • 제17권2호
    • /
    • pp.53-58
    • /
    • 2013
  • 본 연구에서는 각기 다른 에너지의 방사성동위원소를 이용하여 CT를 기초로 한 attenuation correction (AC)과 scatter correction (SC)을 적용했을 때 영상의 질을 비교분석하고 영상보정기법의 유용성에 대해 알아보고자 하였다. Resolution 평가를 위해 사용된 spatial resolution phantom 내부에 물을 채우고 각각의 동위원소 $^{99m}Tc$ (140 keV, 2.22 kBq), $^{201}Tl$ (70 keV, 2.22 kBq), $^{131}I$ (364 keV, 2.22 kBq)을 line에 주입하여 제작하였다. Contrast 평가를 위해 이용한 Jaszczak phantom은 배후방사능과 열소원통의 비율이 1:8이 되도록 각각의 동위원소를 주입하여 제작하였다. GE Infinia Hawkeye4 SPECT/CT (GE Medical System, USA)로 영상을 획득하고, non-correction (NC), AC, SC, AC와 SC가 동시에 적용된(ACSC) 4가지 조건으로 OSEM (2 iterations, 10 subsets)을 이용하여 영상을 각각 재구성하였다. FWHM값은 paired samples t-test를 통하여 유의수준 관계를 분석하였고, percent contrast (%)값은 MATLAB (Ver.7.0)$^{(R)}$과 MRIcro$^{(R)}$를 이용하여 각각의 수치를 비교하였다. $^{99m}Tc$의 resolution test에서 NC, AC, SC, ACSC를 각각 적용했 을 때 FWHM (mm)값은 각각 $4.97{\pm}0.46$, $4.73{\pm}0.27$, $49.7{\pm}0.39$, $4.60{\pm}0.26$, $^{201}Tl$에서는 $5.26{\pm}0.28$, $5.14{\pm}0.21$, $5.25{\pm}0.25$, $5.05{\pm}0.23$, $^{131}I$에서는 $6.24{\pm}0.73$, $5.84{\pm}0.57$, $6.24{\pm}0.69$, $5.98{\pm}0.52$의 값을 얻을 수 있었다. 각 방사성 동위원소의 결과 값에서 NC와 비교하여 AC, ACSC를 적용했을 때 통계적으로 유의한 차이를 보였고(P<0.05), SC만을 적용했을 때는 유의한 차이가 없음을 보여주었다(P>0.05). Contrast test에서는 percent contrast(%) 를 4개의 원통에 대한 값을 구했고, NC와 비교했을 때 AC, SC, ACSC의 percent difference (%)가 $^{99m}Tc$은 24.73, 38.10, 67.31, $^{201}Tl$은 30.90, 51.82, 86.02, $^{131}I$에서는 18.60, 46.26, 73.67의 차이를 보였다. 본 연구의 결과에 따르면 $^{99m}Tc$, $^{201}Tl$ 과 같은 낮은 에너지를 가진 핵종에 대해서는 ACSC를 동시에 적용한 영상에서 resolution 향상이 가장 크게 나타났지만, $^{131}I$ 같은 높은 에너지의 핵종에서는 AC만 적용되었을 때 ACSC를 적용했을 때보다 영상의 질이 더 향상됨을 알 수 있었다. 그러므로 SPECT/CT 검사 시 사용되는 핵종의 에너지에 따라 적절한 영상보정기법을 적용한다면 정확한 진단을 위한 최적의 영상을 얻을 수 있을 것으로 사료된다.

  • PDF

영일만 수질의 시ㆍ공간 변동에 미치는 담수유입의 효과 (The Effect of Freshwater Inflow on the Spatio-temporal Variation of water Qualify of Yeongil Bay)

  • 김영숙;김영섭
    • 환경생물
    • /
    • 제22권1호
    • /
    • pp.57-65
    • /
    • 2004
  • 1998년에서 2000년까지 2월과 5월, 8월, 11월 각 분기별로 영일만과 형산강의 수질의 변화에 대하여 조사하였다. 그리고 형산강에서 영일만으로 유입되는 담수가 영일만 수질에 미치는 영향에 대하여 고찰하였다. 수온은 5월과 8월에 높은 기온과 냉수대의 영향으로 표층수는 저층수보다 수온이 높으며, 염분은 형산강으로 부터 유입되는 담수의 영향으로 만 내측이 특히 낮은 특징을 나타내었다. 그리고 표ㆍ저층수의 염분차는 만 외측이나 만 중앙부에 비하여 만 내측이 크게 나타났다. COD는 8월과 11월에 각각 높게 나타났으며, 2월이 가장 낮은 농도를 나타내었다. 정점별로는 표ㆍ저층 모두 대체적으로 영일만 내측에서 외측으로 갈수록 점차 낮아지는 경향을 보였으며 그 차는 크게 나타났다. DIN의 평균농도는 8월에 가장 높고, 5월에 가장 낮은 값을 나타내었다. 정점별로는 표ㆍ저층수 동일하게 5월을 제외하고 정점 1에서 가장 높았으며, 대체로 만 외측으로 갈수록 점차 낮아지는 경향을 보였다. $PO_4$-P의 평균농도는 2월에 가장 높았고 8월에 가장 낮았다 정점별로는 정점 1에서 현저히 높았고 만 중앙부에 위치한 정점 3, 그리고 만 바깥쪽인 정점 4에서 점차적으로 낮아지는 경향을 보였다. 저층수에서는 11월에 높은 농도를 나타내었으며, 정점별로는 표층과는 상이하게 정점 5와 정점 1에서 높은 농도를 나타내었다. 분기별 형산강수질의 변동에서, COD는 2월과 5월이 각각 높았으며, 전반적으로 유량이 큰 8월이 가장 낮았으나 영일만 수질의 변화와의 비교에서 영일만에 미치는 영향은 가장 크게 나타내었다. TN의 농도범위는 COD와 비슷한 양상을 보였는데, 2월과 5월이 높았고 8월이 가장 낮았다. 반면 TP의 경우에는 2월과 5월에 낮았다. DIN과 $PO_4$-P사이의 상관관계에서, 전반적으로 영일만 내의 외 해수 유입과 담수의 유입이 상호 복잡하게 영향을 미쳐 상관성이 낮은 수치($r^2$=0.5 이하)를 나타내었으며, 이는 만의 가장 내측인 정점 1과 만입구쪽인 정점 5에서의 상이한 양상으로도 알 수 있었다. 또한 만 내 측인 정점 1, 2및 3에서 나타난 $\Delta N/\Delta P $의 부(-)의 상관관계에서도 유입되는 담수의 영향이 큼을 알 수 있었다. 영일만에서는 대체적으로 $\Delta N/\Delta P $ 원자비가 Redfild ratio평균 6.4로 낮게 나타나 전 해역에서 DIN이 $PO_4$-P의 농도에 비하여 상대적으로 고갈된 상태를 나타내었으며, 반면에 과잉된 상태의 $PO_4$-P는 유입되는 형산강담수가 공급원으로 작용함을 알 수 있었다.

인영기구맥(人迎氣口脈)에 대(對)한 내경(內經)과 후대(後代) 의가설(醫家說)과의 비교(比較) 연구(硏究) (study of comparison between Nae-gyung(內經) and later physian's theory on In-yeong-gi-go Maek(人迎氣口脈))

  • 김태은;김태희
    • 대한한방내과학회지
    • /
    • 제15권1호
    • /
    • pp.152-164
    • /
    • 1994
  • In Nai-Gyung(內經), it is said that In-Yeong(人迎) means In- Yeong Maek(人迎脈), Gi-Gu m- eans Tson-Gu(寸口) or Maek- Gu(脈口), In-yeong, artery in the side of neck, is located before Yeong-Geun(瓔筋), called as Jok-Yang-Myung-Maek(足陽明脈),so the part of In-Yeong-Maek means In-Yeong-Hyul(人迎穴) of Jok-Yang-Myung- Wi-Gyung(足陽明胃經) showing the artery in the side of neck. The part of Tson-Gu-Maek is that of artery in Yo-Gol(橈骨), beating source of Soo-Tae-Eum-Maek (手太陰脈) Of In-Yeong-Gi-Gu-Maek, In-Yeong-Maek mainly consists of Yang(陽), Gi-Gu-Maek of Eum(陰), so In-Yeung means physical disease, short of extra Eum component. They said that if In-Yeong-Maek was more than Gi-Gu-Maek, it meant physical injury, while Gi-Gu-Maek was more than In- Yeo-ng-Maek, it meant internal injury. In-Yeong-Gi-Gu-Maek is the one to distinguish the external and internal, the inside and outside, Eum and Yang, but there is no definite classification method to distinguish it, also it is difficult to grasp the comparison of 1sung(1盛), 2sung(2盛), 3sung(3盛), interrelation with 12-Gyung-Rak(l2經絡), change of maek phases, so necessary to set up the clear definition for In-Yeong-Gi-Gu-Maek. For the two theories as to In-Yeong-Gi-Gu-Maek according to Nai-Gyung, the one is to diagnose the maek by comparing the In-Yeong-Hyul with Tson-Gu of Soo-Tae-Eum-Maek as Gi-Gu in the both sides of neck part, he other is to divide the left and right of Gi-Gu-Maek in to In-Yeong and Gi-Gu afterwards, but today it is difficult to compare and explain the medical theory afterwards owing to insufficient consideration of In-Yeong-Gi-Gu-Maek at Nai-Gyung. The diagnosis of In-Yeong-Gi-Gu-Maek at Nai-Gyung to distinguish the surplus and shortage of Eum and Yang up to now since Nai-Gyung has so important and diagnostic value as to grasp the exact meaning. Herewith, this researcher com-pared Nai-Gyung and medical theory afterwards, reported it to consider the fixed position and changing process of viscera and entrails arrangement of literatures introducing In-Yeong-Gi-Gu-Maek, examining the change of maek phases for normal maek and a-bnormal maek of In-Yeong-Gi-Gu-Maek, considering the 1 sung, 2 sung, 3 sung maek phases in In-Yeong-Gi- Gu-Maek. According to the above results, the conclusion was reached as follows. 1. In-Yeong as the outside indicates external disease(外感), showing the surplus and shortage of Yang symptom by having Boo-Maek(浮脈) as Py-ung-Maek(平脈), Gi-Gu as the inside indicates internal disease(內傷), showing the surplus and shortage of Eum symptom by having Chim-Maek(沈脈) as P-yung-Maek(平脈). 2. In Pyung-Maek of In- Yeong-Maek as Boo-Maek, g-radual sinking of more floated changing maek because of disease means the improvement of di-sease, in Pyung-Maek of Gi- Gu-Maek as Chim- Maek, gradual floating of more sunken changing maek because of disease means the improvement of disease. 3. They said that disease of Jok-Gyung-Rak(足經絡) is cha-nged to that of Soo-Kyung-Rak(手經絡) when Jo-Maek(躁脈) appears whether In-Yeong-Maek or Gi-Gu-Maek 4. With the exemples of 1 sung 2 sung 3 sung it was porned with the relation of Pyo-Ri-Soo-Jok(表裏手足). Therfore I can guess that this fact is a moment explained the Bu-You-Sa-Kyung(部有四經) mentioned in Nan-Gyung-18-Nan(難經 第18難). 5. I think that In-Yeong and Gi-Gu, as a diagnosis method which distinguish between the inside indicates internal disease and the outside indicates external disease, is required to study further researches.

  • PDF

<성인인상무>에 대한 연구 (A Study on 'Seungininsangmu' of Haejugwonbeon)

  • 김영희;김경숙
    • 공연문화연구
    • /
    • 제35호
    • /
    • pp.93-123
    • /
    • 2017
  • 한국 민속춤의 정수인 승무는 춤의 연원이나 유래, 춤의 명칭과 복식을 볼 때 불교와 깊은 영향관계를 가지고 오랜 세월 변화 발전되어 온 춤이다. 현재 주로 추어지고 있는 승무는 장삼춤과 북춤의 구성으로 고착되어 있으나, 일제강점기의 승무는 그 역사성과 다양한 유래설 만큼이나 여러 양상의 승무를 유추해 볼 수 있다. 1940년을 전후해서 해주권번의 사범이었던 장양선은 양소운을 통해 <성인인상무>를 작품화했다. 2010년 '양소운 추모공연'에서 추어진 <성인인상무>의 영상을 분석해 본 결과, 첫째, 이 춤은 춤의 제목에서 전달하고자 하는 주제가 뚜렷하고, 승무의 유래설 중에서 불제자가 수도 중에 번뇌하고 타락했다가 다시 불교에 회귀한다는 기원설을 내포하고 있음을 확인할 수 있다. 둘째, 장삼춤 - 북놀이 - 바라춤 - 허튼춤 - 회심곡 - 귀의로 이어지는 과정은 작품의 주제의식을 순차적으로 잘 보여주고 있었다. 셋째, 불교의식무용인 바라무, 민속적 특징인 개성과 즉흥성이 강한 허튼춤, 불교음악인 회심곡 등 내용과 그 전개에 따라 여러 표현방법이 결합한 형식이었다. 이는 20세기 초 승무를 무대화 내지는 작품화하고자 했던 흐름을 잘 반영하고 있음을 알 수 있었다. <성인인상무>는 현재 장삼춤과 북춤만의 장대한 형식의 승무와 비교했을 때, 내용면에서는 본래 승무가 담고자 했던 의미를 살펴볼 수 있었고, 형식적인 측면에서는 악가무와 극적 요소가 결합된 다양성을 되돌아보게 한다. 미래지향적으로 발전할 수 있는 승무를 위해 많은 시사점을 제시하고 있다는 점에서 본 연구의 의의가 있다고 하겠다.

디자인의 형태와 기능에 관한 연구 (Essay on Form and Function Design)

  • 이재국
    • 디자인학연구
    • /
    • 제2권1호
    • /
    • pp.63-97
    • /
    • 1989
  • There is nothing more important than the form and function in design, because every design product can be done on the basis of them. Form and Function are already existed before the word of design has been appeared and all the natural and man-made things' basic organization is based on their organic relations. The organic relations is the source of vitality which identifies the subsistance of all the objects and the evolution of living creatures has been changed their appearances by the natural law and order. Design is no exception. Design is a man-made organic thing which is developed its own way according to the purposed aim and given situations. If so, what is the ultimate goal of design. It is without saying that the goal is to make every effort to contribute to the -human beings most desirable life by the designer who is devoting himself to their convenience and well-being. Therefore, the designer can be called the man of rich life practitioner. This word implies a lot of meanings since the essence of design is improving the guality of life by the man-made things which are created by the designer. Also, the things are existed through the relations between form and function, and the things can keep their value when they are answered to the right purpose. In design, thus, it is to be a main concern how to create valuable things and to use them in the right way, and the subject of study is focused on the designer's outlook of value and uk relations between form and function. Christopher Alexander mentioned the importance of form as follows. The ultimate object of design is form. Every design problem begins with an effort to achieve fittness between the form and its context. The form is the solution to the problem: the context defmes the problem. In other words, when we speak of design, the real object of discussion is not form alone, but the ensemble comprising the form and its context. Good fit is a desirable property of this ensemble which relates to some particular division of the ensemble into form and context. Max Bill mainatined how important form is in design. Form represents a self-contained concept, and its embodiment in an object results in that object becoming a work of art. Futhermore, this explains why we use form so freguently in a comparative sense for determining whether one thing is less or more beautiful than another, and why the ideal of absolute beauty is always the standard by which we appraise form, and through form, art itself. Hence form has became synonymous with beauty. On the other hand, Laszlo Moholy-Nagy stated the importance of function as follows. Function means the task an object is designed to fulfill the task instrument is shaping the form. Unfortunately, this principle was not appreciated at the same time but through the endeavors of Frank Lloyd Wright and of the Bauhaus group and its many collegues in Europe, the idea of functionalism became the keynote of the twenites. Functionalism soon became a cheap slogan, however, and its original meaning blurred. It is neccessary to reexamine it in the light of present circumstances. Charles William Eliot expressed his idea on the relations between function and beauty. Beauty often results chiefly from fittness: indeed it is easy to manitain that nothing is fair except what is fit its uses or functions. If the function of the product of a machine be useful and valuable, an the machine be eminently fit for its function, it conspicuously has the beauty of fittness. A locomotive or a steamship has the same sort of beauty, derived from the supreme fittness for its function. As functions vary, so will those beauty..vary. However, it is impossible to study form and function in separate beings. Function can't be existed without form, and without function, form is nothing. In other words, form is a function's container, and function is content in form. It can be said that, therefore, the form and function are indispensable and commensal individuals which have coetemal relations. From the different point of view, sometimes, one is more emphasized than the other, but in this case, the logic is only accepted on the assumption of recognizing the importance of the other's entity. The fact can be proved what Frank Hoyd wright said that form and function are one. In spite of that, the form and function should be considered as independent indivisuals, because they are too important to be treated just as the simple single one. Form and function have flexible properties to the context. In other words, the context plays a role as the barometer to define the form and function, also which implies every meaning of surroun'||'&'||'not;dings. Thus, design is formed under the influence of situations. Situations are dynamic, like the design process itself, in which fixed focus can be cripping. Moreover, situations control over making the good design. Judging from the respect, I defined the good design in my thesis An Analytic Research on Desigh Ethic, "good design is to solve the problem by the most proper way in the situations." Situations are changeable, and so is design. There is no progress without change, but change is not neccessarily progress. It is highly desirable that there changes be beneficial to mankind. Our main problem is to be able to discriminate between that which should be discarded and that which should be kept, built upon, and improved. Form and Function are no exception. The practical function gives birth to the inevitable form and the $$\mu$ti-classified function is delivered to the varieties of form. All of these are depended upon changeable situations. That is precisely the situations of "situation de'||'&'||'not;sign", the concept of moving from the design of things to the design of the circumstances in which things are used. From this point of view, the core of form and function is depended upon how the designer can manage it efficiently in given situations. That is to say that the creativity designer plays an important role to fulfill the purpose. Generally speaking, creativity is the organization of a concept in response to a human need-a solution that is both satisfying and innovative. In order to meet human needs, creative design activities require a special intuitive insight which is set into motion by purposeful imagination. Therefore, creativity is the most essential quality of every designer. In addition, designers share with other creative people a compulsive ingenuity and a passion for imaginative solutions which will meet their criteria for excellence. Ultimately, it is said that the form and function is the matter which belongs to the desire of creative designers who constantly try to bring new thing into being to create new things. In accordance with that the main puppose of this thesis is to catch every meaning of the form and function and to close analyze their relations for the promotion of understanding and devising practical application to gradual progression in design. The thesis is composed of four parts: Introduction, Form, Function and Conclusion. Introduction, the purpose and background of the research are presented. In Chapter I, orgin of form, perception of form, and classification of form are studied. In Chapter II, generation of function, development of function, and diversification of function are considered. Conclusion, some concluding words are mentioned.ioned.

  • PDF