• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.223-227
• /
• 2010

These study was carried out to investigate the effects of the recovery time, diameter of oocytes on in vitro fertilization or intracytoplasmic sperm injection (ICSI). The in vitro maturation rates to MII stage of oocytes recovered at the inactive, follicular and luteal stages matured for 72 h were $1.4{\pm}0.0%$, $43.4{\pm}3.2%$ and $10.8{\pm}2.7%$, respectively. The fertilization rates of in vitro cultured oocytes recovered from ovaries at the in active, follicular and luteal stages were $0.0{\pm}0.0%$, $15.7{\pm}3.4%$ and $7.6{\pm}3.5%$, respectively. The in vitro maturation rate of oocytes recovered from ovaries at the follicular stage of the reproductive cycle was significantly higher than those at the inactive and luteal stages (p<0.05). The penetration rate determined that the percentages of oocytes with diameters in the < $100\;{\mu}m$, 100 to $100\;{\mu}m$ and 110 to $120\;{\mu}m$ ranges were $17.5{\pm}4.7%$, $43.9{\pm}4.5%$, $21.3{\pm}3.4%$, respectively. The penetration rate of oocytes with diameters between 100 to $100\;{\mu}m$ was significantly higher than that of oocytes whose diameters were < $100\;{\mu}m$ and $110{\sim}120\;{\mu}m$ (p<0.05). The penetration rate of oocytes determined that the percentages of ovaries with diameters between 1 to 5 mm and 6 to 10 mm were $32.9{\pm}3.2%$ and $17.5{\pm}3.7%$, respectively. Thus, the diameters of the ovaries were significantly higher at 1 to 5 mm (p<0.05). A total of 264 oocytes were fixed and stained after co-incubation with sperm, of which 72 had identifiable nuclear material. After in vitro fertilization for 20 hrs, 27.3% of oocytes were penetrated by spermatozoas. Oocytes were fixed and stained after ICSI, of which 38 oocytes contained identifiable nuclear material. After in vitro fertilization and ICSI for 20 hrs, to 27.3% and 67.9% of oocytes were penetrated by spermatozoas. The in vitro fertilization rates by ICSI was significantly higher than that in vitro fertilization method (p<0.05).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.97-108
• /
• 1996

A new type of passive samplers were designed and produced by authors. After evaluating the quality of activated carbon by measuring recovery rate of organic vapors and steadiness of sampling rate, activated carbon with 30 - 35 mesh produced by Company S in Korea was selected. In each passive sampler, an amount of 400 mg of the activated carbon was filled in 25-mm cassette and covered by fixed screen (or wire screen with 100 mesh). In addition to the fixed screen, a wind screen (or wire screen with 300 mesh) was also attached at outer face. The sampling rate of the new Korean passive samplers was estimated Conclusions obtained in the study are as follows. 1. Sampling rates of the newly developed Korean passive samplers were affected by sampling time. For n-hexane, sampling rates of 15- and 60-minute samples were 70.92 and 37.45 ml/min, respectively. Sampling rate of both 200- and 450-minute samples was 25.96 ml/min. It is concluded that, when passive samplers are used for measuring organic vapors, samples be collected longer than 60 minutes. 2. Sampling rate of the passive samplers was also affected by airborne concentration of organic vapors. Lower sampling rates were determined at level of 1/2 threshold limit values (TLVs) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). It is recommended that sampling rate of the passive samplers be obtained at site by measuring concentrations using both the NIOSH Method and passive samplers simultaneously. 3. When the passive samplers, which collected organic vapors, were exposed to clean air for five hours, there was no significant loss of organic vapors due to reverse diffusion. 4. When samples were stored at room temperature ($21.8{\pm}0.7^{\circ}C$) and refrigerator ($3.8{\pm}0.7^{\circ}C$), there was no significant difference in the accuracy of results. For trichloroethylene and n-hexane, accuracies were within 25 % at both temperatures until seven days. However, poor accuracy exceeding 25 % was indicated in toluene from the first day. It is recommended that samples be stored at freezing temperature below $0^{\circ}C$. 5. Sampling efficiency was significantly affected by direction of the passive samplers. Results of samplers facing wind and down, respectively, were compared. Lower amount of organic vapors were collected when the sampler was oriented down. It is recommended that, when air velocity is low in plants, the passive samplers be oriented to the wind. However, when air velocity is high, the passive samplers be oriented down.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.43-52
• /
• 2020

This paper examines how macroeconomic variables, such as interest rate differences, inflation, exchange rates, economic growth and external debt growth, affect capital flight in the ASEAN-8 countries. We apply a panel data model with fixed effect estimation for the data for eight countries from the period 1994 to 2018. We use the residual approach used by the World Bank to measure the value of capital flight. The results show that the interest rate differences, exchange rates, economic growth and foreign debt growth had a positive and significant effect on outward capital flight. A further implication of this finding is that the interest rate differences, exchange rate, economic growth and foreign debt growth are factors that trigger an increase in capital outflow in the ASEAN-8 countries. Nonetheless, inflation rate is not considered to be the main factor influencing capital flight, as average inflation in the ASEAN-8 countries remains relatively stable. This paper will be beneficial for policymakers in the ASEAN-8 countries and encourage them to constantly pay attention to these four variables, as they significantly influence capital flight, whereas they can disregard the impact of the inflation variable that is not significant in influencing capital flight.

• Journal of Embryo Transfer
• /
• v.6 no.1
• /
• pp.25-32
• /
• 1991

The present study was performed to investigate the effects of co-culture with granulosa cells on in vitro fertilization and cleavage of early bovine embryo development. Bovine oocytes were matured for 20-24 hrs in vitro with granulosa cells or without and then fertilized in vitro using frozen-thawed spermatozoa treated with BO-caffeine, BO-BSA(2OmM heparin added). At l8hrs after insemination, oocytes were fixed and examined or further cultured in TCM 199 for 48hrs. The fertilization rates between the control(70.4%) and the groups of co-cultured with granulosa cell(2.5$\times$106 cells/ml; 71.6%, 5.0$\times$ 106/ml; 71.9%, l.0$\times$ 107/ml; 71.1%) did not differ significantly. The cleavage rates in the groups co-cultured with granulosa cell(2.5$\times$ 106 cells/mi; 43.6%, 5.0$\times$ 106/ml; 46.8%. l.0$\times$ 107/ml; 45.0%)were significantly higher than that of without granulosa cell, respectively(P<0.05). However there were no significant differences between the groups co-cultured with granulosa cells. The result indicated that co-culture with granulosa cell was effective means to cleavage of bovine follicular oocytes but did not affect the in vitro fertilization.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.193-196
• /
• 2009

Most of studies adopt a fixed skin color model to segment skin color region in a single image. The methods, however, result in low detection rates or high false positive error rates since the distribution of skin color is varies depending on the characteristics of input image. For the effective skin color segmentation, therefore, we need a adaptive skin color model which changes the model depending on the color distribution of input image. In this paper, we propose a novel adaptive skin color segmentation algorithm consisting of 2 stages which results in both high detection rate and low false positive error rate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.79-86
• /
• 2000

The effects of recirculated exhaust gas on the wears of piston and piston rings were investigated by the experiment with a two-cylinder, four cycle, indirect injection diesel engine operating at an engine load of 75% and an engine speed of 1600 rpm. For the purpose of comparison between the wear rates of two cylinders with and without EGR, the recirculated exhaust gas was sucked into one of two cylinders after the soot contenets in exhaust emissions were removed by an intentionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diameter), while only the fresh air was inhaled into the other cylinder. These experiments were carried out on the fuel injection timing fixed at 15.3$^{\circ}$ BTDC. It was found that the wear rate of piston skirt with EGR increased a little bit, but the piston head diameter increased, rather than decreased, owing to soot adhesion and erosion wear, and especially larger with EGR, and that the wear rates of the top and second piston ring(compression ring)thickness with EGR were more than twice the wear rate of top ring in case of no EGR, but the wear rate of oil rings thickness without EGR increased greater than that with EGR.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.36-42
• /
• 2020

Fenton process is one of the most effective advanced oxidation processes for the removal of pollutants from wastewater. In this study, while ferrous iron was used in conventional Fenton process (CFP); nano-sized iron(II, III) oxide was experienced in modified Fenton process (MFP) as a new catalyst alternative. In order to enhance their oxidation efficiencies, both CFP and MFP were combined with ultrasonication at 53 kHz fixed frequency. Thus, the influences of both catalyst iron species and ultrasonication on color and chemical oxygen demand (COD) removals from synthetic textile wastewater including Maxilon Red GRL 200% dyestuff were investigated experimentally. While the COD and color removal rates were found as 72.5% and 69.7% via CFP; they were 87% and 75.8% by ultrasonicated CFP, respectively. The color and COD removals were 40.6% and 64.8% via MFP, and 49.9 and 73.1% by ultrasonicated MFP, respectively. Therefore, it was found that the simultaneously usage of ultrasonication with CFP and MFP was improved the COD and color removal efficiencies and oxidation rates even at lower H₂O₂ dosages, compared to individual CFP and MFP. Moreover, the color and COD removal kinetics were also modelled mathematically and compared in the study.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2219-2226
• /
• 2003

Two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of the hole diameter, and initial crossflow passes between the plates. Both the injection and effusion hole diameters are 10 mm, and the Reynolds number based on the hole diameter and hole-to-hole pitch are fixed to 10,000 and 6 times of the hole diameter, respectively. To investigate the effect of crossflow, the flow rate of crossflow is changed from 0.2 to 2 times of that of the impinging jet. A naphthalene sublimation method is used to determine the local heat/mass transfer coefficients on the upward facing surface of the effusion plate. With the initial crossflow, the heat/mass transfer rates on the effusion (target) plate decrease as the velocity of crossflow increases, since the crossflow induces the locally low transfer regions formed at the mid-way between the effusion holes. However, the impingement/effusion cooling with crossflow presents higher heat/mass transfer rates than the array jet impingement cooling with the same initial crossflow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.2
• /
• pp.181-188
• /
• 2004

The frequency characteristics in an axial flow fan operating at a design and three off-design operating conditions have been investigated by measuring the velocity fluctuation of a tip leakage vortex and a wake flow. Two hot-wire probe sensors rotating with the fan rotor. a fixed and a moving ones, were introduced to obtain a cross-correlation coefficient between two sensors as well as the fluctuating velocity. The results show that the spectral peaks due to the fluctuating velocity near the rotor tip are mainly observed in the reverse flow region of higher flow rates than those in the peak pressure operating condition. However, no peak frequency presents near the rotor tip for near stall condition. Detailed wake flow just downstream of the rotor blade was also measured by the rotating hot-wire sensor. The peak frequency of a high velocity fluctuation due to Karman vortex shedding in the wake region is mainly observed at the higher flow rate condition than that in the design point.

• Health Policy and Management
• /
• v.19 no.4
• /
• pp.33-52
• /
• 2009

Health promotion policies have needed to assess in detailed and evidence-based work to set a policy goal and clear future directions of health promotion in Korea. To identify the major factors related with health promotion, we assessed the associations between public health outcome (potential years of life loss, PYLL) and national health determinants. For this purpose, we used a pooled cross sectional time-series regression analysis with corrected fixed effect models involving sixteen member countries of the Organisation for Economic Cooperation and Development during the period 1970 to 2001. The PYLL was positively associated with tobacco and alcohol consumption (model 1 and 2) and calories intake (model 2 and 3) while the PYLL was negatively associated with GDP, fruit and vegetable intake (model 2), number of doctors (model 3), coverage rates of health care security, and elderly population rates (model 4). In conclusion, health behaviors related with tobacco, alcohol, and nutrition were significant health determinants for health outcome. Overall analysis results of this study will provide a guidance toward improved macro- and micro-policy development for future health promotion policy in Korea.