• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.119-124
• /
• 2005

Decision of operation performance mode to minimize the energy consumption of urban rail vehicle. This paper analyses how much acceleration and deceleration of urban rail vehicle should be applied andhow to choose an operation mode to minimize energy consumption when train runs between station within the fixed operation time. The decided operation pattern satisfying the minimum energy consumption becomes a target trajectory and a basis for the controller design criteria. To make this goal it grasps the characteristics of urban rail vehicle, realize operation energy model of urban rail vehicle and verify the accuracy of embodied model the Matlab simulation with the same operation result of real route. It searches for operation pattern to minimize operation energy by changing the acceleration and deceleration on the imaginative route and proposes operation pattern minimizing energy consumption by applying real operation data between Dolgogee-Sukgye section of Seoul Metropolitan Subway Line 6.

• 한국통신학회논문지
• /
• 제25권3B호
• /
• pp.557-564
• /
• 2000

This paper presents a watermarking algorithm for embedding visually recognizable pattern (Mark, Logo, Symbol, stamping or signature) into the image. first, the color image(RGB model)is transformed in YCbCr model and then the Y component is transformed into 3-level wavelet transform. Next, the values are assembled with pattern watermark. PN(pseudo noise) code at spread spectrum communication method and mutilevel watermark weights. This values are inserted into discrete wavelet domain. In our scheme, new calculating method is designed to calculate wavelet transform with integer value in considering the quantization error. and we used the color conversion with fixed-point arithmetic to be easy to make the hardware hereafter. Also, we made the new solution using mutilevel threshold to robust to common signal distortions and malicious attack, and to enhance quality of image in considering the human visual system. the experimental results showed that the proposed watermarking algorithm was superior to other similar water marking algorithm. We showed what it was robust to common signal processing and geometric transform such as brightness. contrast, filtering. scaling. JPEG lossy compression and geometric deformation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.198-205
• /
• 2005

Many precedent investigations hate been made for the reliable assessment of the insulation state of large power apparatus for which partial discharge detection is one of tile plausible way. In this work, experimental investigations have been carried out to make the comparison on the PD(partial discharge) pattern analysis related to the five different types of artificial defects such as SFMP (Single Free Moving Particle), MFMP (Multi Free Moving Particle), Void, CFP (Conductor-Fixed Protrusion), EP (Enclosure Protrusion). For each PD pattern, PD detection has been done by tee different types of PD sensors such as HFCT(High Frequency Current Transformer), AE(Acoustic Emission) and UHF(Ultra High Frequency). And, in addition, frequency spectrum by the UHF sensor has been also made for each defect respectively. As a result, it is observed that the possibility of obtaining PD pattern based on PRPD(Phase Resolved Partial Discharge) in connection with the defects tinder investigation is dependant on the type of the sensor while the spectrum analysis is always successful to be achieved for every defect. Therefore, it could be suggested that the nature of PD source can be identified more distinctively when the conventional PRPDA is combined with spectrum analysis.

• 복식
• /
• 제59권9호
• /
• pp.1-15
• /
• 2009

This study aimed to create a new costume design suitable for publicizing our traditional patterns in the world by using the traditional patterns of Northeast Asia region. The result of this study can be summarized as follows. First, China is characterized by a strictly fixed configuration and a realistic description, Japan a simplistic modality and an abstract-geometrical pattern, and Korea a eclectic type, whole-pattern, and part-pattern. This study aimed to make the pattern by using harmoniously these characters. Second, Korea, China, and japan have many similarities concerning a symbolism and a type of pattern. In the modern fashion, they often use dragon patterns, various flower patterns like peony, plum blossom, or mum, and geometrical patterns. This study focused on expressing patterns which contain the ornamental symbolism of Oriental Look, aside from an existing symbolism, and show a traditional sentiment of Northeast Asia. The method for expressing traditional patterns usually included weaving, dyeing, embroidery, or gold foil. Although these methods have been used in all the three nations, even rubbed metal foil and patchwork have been widely used in Japan.

• Journal of the Korean Data and Information Science Society
• /
• 제21권6호
• /
• pp.1263-1270
• /
• 2010

60명의 환자들을 20명씩3개 그룹으로 나누어 각 그룹마다 다른 종류의 식이요법을 실시한 후 1주 간격으로 5주간에 걸쳐서 콜레스테롤 수치에 대한 반복측정 자료를 얻었다. 해당자료를 바탕으로 적합성여부와 유의성 검정을 실시한 결과 등분산 Toeplitz가 다양한 공분산행렬 형태들 중에서 가장 적합한 공분산구조 모형으로 판명되었다. 이 모형에서는 시점들 간의 상관계수는 0.64-0.78로 대체적으로 높은 상관관계들을 보여주고 있으며, 모수인자들의 유의성검정 결과, 시간효과는 대단히 유의하게 나타났으나, 처리 및 처리와 시간과의 교호작용효과는 유의하지 않은 것으로 판명되었다.

• 대한치과교정학회지
• /
• 제39권6호
• /
• pp.402-419
• /
• 2009

성장이 종료된 치성 또는 골격성 개방교합 환자를 치료하는 것은 매우 어려운 일이다. 전치부 개방교합 환자는 증가된 전안면고경, 상악 구치부의 과도한 수직성장, 큰 하악각 등의 특징을 지닌다. 이러한 증례에서 구치의 압하를 통한 개방교합의 해소는 좋은 치료전략이다. 본 연구는 교정용 미니임플란트를 이용하여 개방교합을 치료하고 성공적인 유지를 얻은 두 명의 환자에 대한 보고이다. 적절한 진단이 시행되고 교정용 미니임플란트 등의 장치를 이용한 치료기법을 적용하면 수술치료 없이 교정치료만으로 개방교합의 치료가 가능하며, 하악구치부에 posterior bite block을 추가한 가철식 유지장치 및 SFR이 개교환자를 위한 유지장치 또는 보조유지장치로 유용하게 사용될 수 있다는 결론을 얻었다.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.130-143
• /
• 1995

The purpose of this study was to analyze the magnitude and distribution of stress using photoelastic model with the rigid connection using T-block attachment and non-rigid connection using key & keyway attachment. The vertical load of 16 Kg was applied on the central fossa of the tooth, the pontic and the implant, and the pattern and distribution under each condition was analyzed. The following results were obtained : 1. In case of vertical load on the central fossa of the implant, the stress was concentrated at the apex of the implant involving the mesial alveolar bone in both fixed partial denture with the rigid connection and that with the nonrigid connection and the stress concentration at the mesial cervical area of the implant was a little more in the nonrigid connection than in the rigid connection. 2. In case of vertical load on the central fossa of the pontic, the stress was concentrated at the apex of 2nd bicuspid in both 3 unit fixed partial denture with nonrigid connection and that with the rigid connection. The stress was more concentrated at the mesial alveolar bone of the implant, but the stress distribution at the natural teeth more favorable at the rigid connection than at the non-rigid connection in case of 4 unit fixed partial denture. 3. In case of vertical load of the central fossa of the 2nd bicuspid, much stress with 3 fringe order was observed at the apex of the 2nd bicuspid in the 3 unit fixed partial denture, but relatively even stress distribution was observed at the apex of the implant, the 1st and 2nd bicuspid, and the adjacent cuspid in the 4 unit fixed partial denture.

• 복식문화연구
• /
• 제21권6호
• /
• pp.860-876
• /
• 2013

The pattern cases for Korean traditional socks are named "beoseonbongip" which means a pouch to keep patterns for making "beoseon". "Beoseon" is Korean traditional socks. This study is to identify characteristics of the pattern cases and to develop cultural products based on the unique characteristics of the pattern cases. One hundred fifty one photos of "beosonbongip" were collected and quantitatively and qualitatively analyzed. Seventy percent of them were made between Joseon Dynasty and 1960s. As a result, most of the collected pattern cases are rectangular and square shapes, red color, and silk fabrics, and sizes of them are from 9cm to 15cm. A few pattern cases with different sizes and colors were also observed. Most pattern cases were made by fixing two among four triangle pieces which made by folding four tips of a rectangular or square cloth and then puting a not or a loop on the remaining triangle pieces in order to open and close the pattern cases. In a small number of the pattern cases, three of the four pieces were fixed and a button, a bead, a broach, or two nots or two loops were put on the other piece for opening and closing. Products such as apparels, bags, pouches, frames, and key holders were made using "beoseonbongip" form and construction method. This shows that "beoseonbongip" is a useful motive for creative product development.

• 한국의류학회지
• /
• 제31권5호
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• 한국콘텐츠학회논문지
• /
• 제8권4호
• /
• pp.63-70
• /
• 2008

본 논문은 임의의 펄스 레이저 송신기에서 방사되는 레이저 펄스 신호를 실시간으로 수신하여 수신된 레이저 펄스열(pulse train)의 펄스 반복주기(pulse repeat interval: PRI)의 형태와 반복 시간을 계산하는 방법에 대하여 기술하였다. 레이저 송신기에서 방사되는 펄스열의 형태와 주기는 고정(fixed), 지터(jitter), 삼각파 등 매우 다양하며, 이러한 레이저 신호의 PRI 패턴을 구하기 위해서 펄스도래시간(time of pulse arrival)의 1차 차분과 2차 차분을 이용하는 방법을 제안하였다. 제안된 방법은 TOA의 1차 차분의 표준편차가 평균값의 5%이하이면 수신된 펄스열은 고정 PRI 패턴 또는 지터 PRI 패턴이며, 5% 이상이면 삼각파 또는 톱니파 등의 PRI 패턴으로 분리한다. 본 알고리즘을 이용하여 펄스열을 분리한 결과 신호 분석능력이 우수하여 레이저 감시 시스템 등에 사용할 수 있을 것으로 판단된다.