본 논문에서는 인접 채널 간섭 분석을 위한 통합 필터 변별도(NFD)의 수식과 계산을 고찰하며, 이를 근거로 고정 무선 중계망의 주파수 조정에 필요한 동일 채널 및 인접 채널 보호비 산출을 위한 체계적인 알고리즘을 제시한다. 인접 채널 보호비를 페이드 마진, 변조 방식, 허용 간섭의 함수로 표현된 동일 채널 보호비와 송신스펙트럼 마스크 및 수신기 필터 특성에 의존하는 NFD의 계산 결과로 구할 수 있음을 보인다. 실제 계산을 보이기 위해 6.2 및 6.7 GHz 대역의 29.65 및 40 MHz 채널 대역폭에 대한 각각의 스펙트럼 마스크와 수신기 필터 특성으로 NFD를 구하였다. 결과에 의하면 29.65 및 40 MHz 채널에 대한 첫 번째 인접 채널의 NFD는 각각 27.4 및 28.9 dB을 얻었다. 이러한 결과로부터 거리 60 km, 64-QAM에 대해 채널 대역폭 29.65 및 40 MHz의 인접 채널 보호비는 각각 47.5 및 46.3 dB이 됨을 알 수 있었다. 제안된 방법은 계산이 용이하고 체계적인 확장과 밀리미터 무선 중계망의 주파수 조정에도 적용되는 이점이 있다.
Statement of problem. Unreasonable distal cantilevered implant-supported prosthesis can mask functional problems of reconstruction temporarily, but it can cause serious strain and stress around its supported implant and surrounding alveolar bone. Purpose. The purpose of this study was to evaluate strain of implants supporting distal cantilevered fixed prosthesis with two different cantilevered length under distal cantilevered static load. Material and methods. A partially edentulous mandibular test model was fabricated with auto-polymerizing resin (POLYUROCK; Metalor technologies, Stuttgart, Swiss) and artificial denture teeth (Endura; Shofu inc., Kyoto, Japan). Two implants-supported 5-unit screw-retained cantilevered fixed prosthesis was made using standard methods with Type III gold alloy (Harmony C&B55; Ivoclar-vivadent, Liechtenstein, Germany) for superstructure and reinforced hard resin (Tescera; Ivoclar-vivadent, Liechtenstein, Germany) for occlusal material. Two strain gauges (KFG-1-120-C1-11L1M2R; KYOWA electronic instruments, Tokyo, Japan) were then attached to the mesial and the distal surface of each standard abutment with adhesive (M-bond 200; Tokuyama, Tokyo, Japan). Total four strain gauges were attached to test model and connected to dynamic signal conditioning strain amplifier (CTA1000; Curiotech inc., Paju, Korea). The stepped $20{\sim}100$ N in 25 N increments, cantilevered static load 8mm apart (Group I) or 16mm apart (Group II), were applied using digital push-pull gauge (Push-Pull Scale & Digital Force Gauge, Axis inc., Seoul, Korea). Each step was performed ten times and every strain signal was monitored and recorded. Results. In case of Group I, the strain values were surveyed by $80.7{\sim}353.8{\mu}m$ in Ch1, $7.5{\sim}47.9{\mu}m/m$ in Ch2, $45.7{\sim}278.6{\mu}m/m$ in Ch3 and $-212.2{\sim}718.7{\mu}m/m$ in Ch4 depending on increasing cantilevered static load. On the other hand, the strain values of Group II were surveyed by $149.9{\sim}612.8{\mu}m/m$ in Ch1, $26.0{\sim}168.5{\mu}m/m$ in Ch2, $114.3{\sim}632.3{\mu}m/m$ in Ch3, and $-323.2{\sim}-894.7{\mu}m/m$ in Ch4. Conclusion. A comparative statistical analysis using paired sample t-test about Group I Vs Group II under distal cantilevered load shows that there are statistical significant differences for all 4 channels (P<0.05).
이방성 습식 식각기술을 이용하여 멤버레인을 제작하기 위하여 KOH 용액 및 KOH-IPA 혼합용액을 사용하여 단결정 실리콘 기판을 식각하였다. 단결정 실리콘의 식각속도는 식각 용액의 온도와 농도에 좌우되었으며, 식각 용액의 농도에 따라 식각 형태와 패턴 형성 방향이 달라짐도 관찰되었다. 식각을 위한 표면패턴은 실리콘웨이퍼의 primary flat에 $45^{\circ}$로 기울여 형성되었으며 KOH의 농도가 20 wt%로 유지되었을 때, 식각 용액의 온도 $80^{\circ}C$ 이상에서는 U-groove, $80^{\circ}C$ 이하의 온도에서는 V-groove 식각 형태가 형성되었다. 각 면에 대한 식각속도 차이에 의해서 생기는 hillock은 온도와 농도가 높아짐에 따라 현저하게 줄어들었다.
의미있는 객체를 배경과 분리하는 영상분할기법은 침입자 경보 시스템, 교통 감시 시스템 등에서 중요한 역할을 담당하며, 일반적으로 공간적 동질성이나 시간적 정보를 이용하는 방법으로 나눌 수 있다. 시간적 정보를 이용하는 방법은 프레임간의 화소값이나 에지성분을 이용한다. 화소값 이용은 간단하며 효과적이나 조명 변화 등이 발생할 경우 움직임 검출이 어렵고 에지성분의 이용은 조명의 영향을 받지 않지만 복잡하며 잡음처리에 어려운 점이 있다. 따라서 본 논문은 카메라가 고정된 감시 시스템에서 화소값 비교와 에지 정보를 이용하여 조명등의 영향을 최소화하는 움직임 객체 추출 방법을 제안한다. 이는 조명변화와 배경영상의 존재여부에 따라 세 가지 움직임 객체 추출 방법을 달리 적용하며, 투영과 형태 처리 연산자를 사용하는 후처리과정을 거친 후 움직임 객체를 추출한다. 모의실험 결과 제안알고리즘은 조명변화가 발생하더라도 객체 추출의 결과가 우수함을 보이고 있다.
디지털 영상을 처리하는 기술이 발전함에 따라 영상에서 에지는 물체 인식 및 물체 검출 등 여러분야에서 널리 활용되고 있다. 에지를 검출하는 기존의 방법에는 Sobel, Roberts 등의 고정 가중치 마스크를 이용하는 방법들이 대부분이다. 이와 같은 기존의 방법들은 구현이 간단한 장점이 있는 반면 다소 에지 검출 특성이 미흡하다. 따라서 이와 같은 기존의 에지 검출 방법들이 갖는 문제점을 보완하고, 우수한 에지 검출을 얻기 위해 변형된 모폴로지를 이용한 알고리즘을 제안하였으며, 기존의 방법들과 비교하기 위해 시뮬레이션하였다.
에지는 영상에서 물체의 인식, 검출 등의 여러 분야에서 영상을 간략화하기 위해 전처리 과정으로서 널리 활용되고 있다. 일반적으로 널리 알려진 에지 검출 방법에는 Sobel, Roberts, Laplacian 등이 있으며, 이러한 기존의 방법들은 구현이 간단한 장점을 가지나, 고정 가중치 마스크를 이용하기 때문에 다소 미흡한 결과를 나타낸다. 따라서 기존의 에지 검출 방법의 문제점을 보완하고 우수한 에지 검출 특성을 얻기 위해 화소 분포를 고려한 에지 검출 알고리즘을 제안하였다. 제안한 알고리즘을 평가하기 위해 기존의 방법과 시뮬레이션하였다.
Study that form micro pattern by direct ink jet printing method is getting attention recently. Direct ink jet printing spout fine droplet including nano metal particle by force or air pressure. There is reason which ink jet printing method is profitable especially in a various micro-patterning technology. It can embody patterns directly without complex process such as mask manufacture or screen-printing for existent lithography. In this study, research of a technology that ejects fine droplet form of Pico liter and forms metal micro pattern was carried with inkjet head of piezoelectricity drive system. Droplet established pattern while ejecting consecutively and move on the surface at the fixed speed. Patterns formed in ink are mixed with organic solvent and polymer that act as binder. So added thermal hardening process after evaporate organic solvent at isothermal after printing. I executed high frequency special quality estimation of CPW transmission line to confirm electrical property of manufactured circuit board. We tried a large area printing to confirm application possibility of an ink jet technology.
In this paper, optimal deep reactive ion etching (DRIE) process conditions for fused quartz were experimentally determined by Taguchi method, and fused quartz-based micro cantilevers were fabricated. In addition, comparative study on Q-factors of fused quartz and silicon micro cantilevers was performed. Using a silicon layer as an etch mask for fused quartz DRIE process, different 9 flow rate conditions of $C_4F_8$, $O_2$ and He gases were tested and the optimum combination of these factors was estimated. Micro cantilevers based on fused quartz were fabricated from this optimal DRIE condition. Through conventional silicon DRIE process, single-crystalline silicon micro cantilevers whose dimensions were similar to those of quartz cantilevers were also fabricated. Mechanical Q-factors were calculated to compare intrinsic damping properties of those two materials. Resonant frequencies and Q-factors were measured for the cantilevers having fixed widths and thicknesses and different lengths. The Q-factors were in a range of 64,000 - 108,000 for fused quartz cantilevers and 31,000 - 35,000 for silicon cantilevers. The experimental results supported that fused quartz had a good intrinsic damping property compared to that of single crystalline silicon.
한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
/
pp.131-136
/
2006
Commercial uses of GPS have been growing rapidly with applications for aircraft, ship, and land vehicle navigation as well as for surveying and time keeping. The next generation GPS and Japanese QZS (Quasi Zenith Satellite) will provide three different civil signals. Galileo will also provide several types of civil signals. The availability of the third civil frequency has obvious advantages to instantaneous carrier phase accuracy and ambiguity resolution for centimeter level measurements. This paper discusses the effects of additional new civil signals for the high accuracy positioning in urban areas based on simulation using practical raw data. As for constellation, only GPS and GPS+QZS are considered. For positioning, a short distance baseline is assumed in order to disregard atmosphere effects. In this simulation, mask angle and signal conditions were fixed and ambiguity success rates were compared between different triple frequency combination scenarios. The coefficient of reflection was set randomly from 0.05 to 0.5 and the multipath delay was also set randomly from 5-100 m. Visible satellites and signal strength were determined by raw data collected in Tokyo by car. These simulation results have confirmed that the availability of high accuracy positioning will increase in all scenarios if we use GPS+QZS with triple frequencies.
CCD 카메라가 부착된 head mounted display (HMD)를 이용하여 포도막 흑색종(uveal melanoma)을 치료하기 위해 외부 침투적 고정장치 없이 안구의 움직임을 감시할 수 있는 안구의 고정 및 감시장치를 제작하여 임상 사용 가능성을 확인하고자 하였다. 안구 고정 및 감시장지 시스템은 환자의 안구를 고정시키기 위해 환자의 초점을 일정하게 해 줄 수 있는 스크린이 달린 head mount display (HMD) 장치와 고정된 안구를 감시할 수 있게 HWD에 부착시킨 CCD 카메라, 그리고 환자의 머리를 고정시키는 마스크로 구성되어 있다. CCD 카메라가 부착되어 있는 HMD를 마스크 위에 부착하여, HMD의 스크린에서 보여주는 기준점을 환자가 주시하도록 하여 환자의 안구를 고정시킬 수 있었다. 본 연구는 4명의 지원자와 정위적 방사선수술을 시행하는 한 명의 포도막 흑색종 환자를 대상으로 하였다. 4명의 지원자에게서는 셋업에 따른 오차와 안구의 움직임을 분석하는 자료를 얻었고, 한 명의 환자에게서는 임상 사용의 가능성을 확인하였다. 환자는 HMD를 착용한 후 스크린에서 보여지는 기준점에 안구를 고정시킨 후, CT 촬영을 하였다. 방사선 수술기간 동안에도 치료 전에 치료계획을 위한 CT 촬영 시와 동일한 조건에서 매일 CT 촬영을 시행하였고, 이것을 치료계획을 위해 촬영한 CT 영상과 비교하여, 방사선 치료를 받는 기간 동안 수정체의 움직임을 비교하였다. 4명의 지원자의 자료에서 얻은 셋업에 따른 오차는 1mm 이내였으며, 안구의 움직임도 2mm 이내의 오차범위 내에 고정할 수 있었다. 본 연구에서 제작한 안구의 고정 및 감시장치는 외부 침투적 고정장치 없이 환자의 안구를 성공적으로 고정시켜 포도막 흑색종의 정위적 방사선수술을 시행할 수 있게 하였다. 이로써 자체 제작한 안구의 고정 및 감시장치의 임상 사용의 가능성을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.