• 한국응용곤충학회지
• /
• 제16권2호
• /
• pp.105-113
• /
• 1977

한국산 불개미의 다형현상에 있어서 일개미의 몸의 크기와 임무수행과의 관계, 유시웅의의 시맥상의 변이, 성비 및 소의 크기에 따르는 일개미번데기의 형별발생과 일개미집단의 형별구성등에 관하여 조사한 결과를 요약하면 다음과 같다. 1. 일개미는 3형으로 분화되어 있으며, 소형은 주로 소의 내부에 동료집단의 보호와 외부에서 진딧물에 방문하는 임무를, 그리고 대형과 중간형은 주로 외부에서 식이운반, 조소 및 동료집단의 보호임무를 수행한다. 그러나 소형이 진딧물에 방문하는 임무는 반드시 고정되어 있는 것이 아니고 계절에 따라 다소 변동이 있는 것 같다.

• Composites Research
• /
• 제16권5호
• /
• pp.28-38
• /
• 2003

본 연구는 면내 선형분포하중이 작용하는 직교이방성판의 좌굴거동에 관한 것으로서, 하중이 재하된 두 변은 단순지지되어 있으며 하중이 재하되지 않은 두 변은 회전에 대해 탄성구속된 경계조건을 포함하여 다양한 경계조건을 갖는 직교이방성판의 좌굴해석식을 정밀해법을 사용하여 유도하였다. 좌굴해석 수행 결과를 사용하여 하중이 재하되지 않은 두 변이 특정 경계조건인 경우를 포함하여 회전에 대해 탄성구속된 판의 좌굴해석을 위한 근사식을 판의 형상비와 탄성구속 정도를 나타내는 계수 및 재료의 성질의 함수로 제시하였다. 제시된 근사식을 사용할 경우 재료의 성질과 판의 형상비 및 하중이 재하되지 않은 변의 탄성구속정도를 알면 단순계산으로 직교이방성판의 좌굴해석을 수행할 수 있도록 하였다. 여러 가지 직교이방성 재료에 대해 근사식에 의한 해석결과와 정밀해법에 의한 해석결과를 비교한 결과 1.5% 미만의 차를 나타냈었다.

• Structural Engineering and Mechanics
• /
• 제48권3호
• /
• pp.367-382
• /
• 2013

Different types of long slender pile shall buckle with weak soil and liquefied stratum surrounded. Different from considering single side earth pressure, it was suggested that the lateral earth pressure can be divided into two categories while buckling: the earth pressure that prevent and promotes the lateral movement. Active and passive earth pressure calculation model was proposed supposing earth pressure changed linearly with displacement considering overlying load, shaft resistance, earth pressure at both sides of the pile. Critical buckling load calculation method was proposed based on the principle of minimum potential energy quoting the earth pressure calculation model. The calculation result was contrasted with the field test result of small diameter TC pile (Plastic Tube Cast-in-place pile). The fix form could be fixed-hinged in the actual calculation assuring the accuracy and certain safety factor. The contributions of pile fix form depend on the pile length for the same geological conditions. There exists critical friction value in specific geological conditions that the side friction has larger impact on the critical buckling load while it is less than the value and has less impact with larger value. The buckling load was not simply changed linearly with friction. The buckling load decreases with increased limit active displacement and the load tend to be constant with larger active displacement value; the critical buckling load will be the same for different fix form for the small values.

• 대한건축학회논문집:계획계
• /
• 제35권8호
• /
• pp.35-46
• /
• 2019

This study started from the interest about a theme repeated in a similar way among a group of architects in Japan. They argue that a building composed of random elements can lead to discoverable functions rather than fixed functions. Their work supports this to a certain extent, but at the same time raises the following two research questions. Can 'formal randomness' and 'functional discoverability' be completely identical? Does such a form sufficiently fulfill other functions of the building? In order to answer these two research questions, this study analyzes the relationship between form and function in the 'Children's Center for Psychiatric Rehabilitation' of Sou Fujimoto. The analysis proceeded in three steps. In the first step, I found that alcoves were the most important factor in functional discoverability by comparing scenarios with different conditions. At the same time, however, I could see that these alcoves were weakened in the process of functional adjustment. In the second step, I analyzed the final design and found Sou Fujimoto's response to the preceding problem. He thought that in-between alcoves created from formal randomness, were not enough and thus introduced a new method, cutting alcoves. This means that formal randomness alone does not fully guarantee both the functional discoverability and the fulfillment of the basic functions. In the third step, I searched for the significance of this problem through a brief comparison with other similar projects.

• Tribology and Lubricants
• /
• 제40권2호
• /
• pp.61-66
• /
• 2024

Micro-plastics are synthetic high-differentiation chemicals of less than 5mm in size, and are deposited not only on the sea surface but also on the coast. If these micro-plastics are not properly separated from the sand, they can threaten marine ecosystems. Thus, in the present study, we aimed to apply cyclone separator to the micro-plastic retrieval in order to predict the movement of particles according to the formation of the cyclone separator by applying the centrifugal force of the particle in accordance with the rotational movement of the air. The cyclone separator has three shapes, the first one is a typical interconnected cyclone separator. The second is the horn form, except for the cylinder in a regular cyclone separator, and the third is a form that increases the horn's height twice in the second. The numerical analysis simulation of the Cyclone separator used the Fluent software package. The output speed of the Cyclone separator was 5 to 13m/s at 1m/s intervals. The simulated particles include sand, Styrofoam, PET, PP, and PU. Sand particles are assigned a fixed diameter of 2mm, while other particles have a diameter of 3mm. As a result of the analysis, the first form was not separated from plastic. The Styrofoam separation efficiency in the second showed its highest efficiency at 72.7% at 7m/s, and the efficiency decreased after 12m/s as the sand particles were mixed into the plastic attachment location. In the third form, the separation efficiency of Styrofoam at 12m/s was highest at 67.9%.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권1호
• /
• pp.18-24
• /
• 2013

Purpose: This study is performed to determine the effects of titanium cap with various sizes of pores on bone formation during guided bone regeneration (GBR). Methods: Calvaria from 10 adult male rabbits were chosen as the recipient sites. A trephine bur with a diameter of 10 mm was used to form one round groove on each side of sagittal suture of the cranium, and a round bur with a diameter of 1.5 mm was used to form 6 small holes on the inner circles of round grooves to induce bleeding. In the control group, bone graft was not conducted, and closed titanium cap was fixed in the round groove. Bone graft was not performed in groups 1 and 2, but fixed on titanium caps with 0.2 mm, and 0.5 mm sized pores, respectively. For groups 3, 4, and 5, a synthetic bone graft material (${\beta}$-tricalcium phosphate, Cerasorb$^{(R)}$, Germany) was transplanted, and titanium caps without pore, with 0.2 mm and 0.5 mm sized pore were fixed, respectively. The animals were sacrificed 4 weeks after, and clinical, radiographical, and histomorphometrical evaluation of bone regeneration was performed. Results: In all groups, there were no clinical signs of infection, inflammation or wound dehiscence. Radiographic evaluation revealed well-defined semi-circular radiopacity inside the titanium cap of groups 3, 4, and 5. Histologically, the inner surface of the hemisphere was evenly lined with newly formed bone tissue, as well as grafted bone material in the group 3. In groups 4 and 5, the insertion of connective tissue was observed along the inner surface. However, the overall surface area between the grafts with different holes yielded no statistical significance in the histomorphometrical evaluation. Conclusion: Although the total area of newly formed bone showed no significant difference, excellent bone formation tendency was observed histologically when closed caps were used with bone graft was accompanied.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권6호
• /
• pp.834-842
• /
• 2017

Objective: An experiment was to evaluate the interplay of dietary lipid sources and feeding regime in the transition from sow milk to solid food of abruptly weaned piglets. Methods: Soon after weaning, 144 piglets were selected and were trained over a 15 day period to experience gradually reducing dietary fat content from 12% to 6% for lard (L), soybean oil (S), and coconut oil (C) and their feeding behavior and diet preference then tested in a behavior observation experiment. Another 324 weaned piglets were used in three consecutive feeding experiments to measure the effect of different dietary fats on performance and feed choice in the four weeks after abrupt weaning. The lipid sources were used as supplements in a 3% crude fat corn/soya basal diet, with 6% of each being included to form diets 9C, 9S, and 9L respectively, and their effects on performance measured. Combinations of these diets were then further compared in fixed blends or free choice selection experiments. Results: Piglets pre-trained to experience reducing lipid inclusion showed different subsequent preferences according to lipid source, with a preference for lard at 9%, soybean oil at 3%, and coconut oil at 6% inclusion rate (p<0.001). Following abrupt weaning, whilst after 4 weeks those fed 9C had the heaviest body weights (18.13 kg, p = 0.006). Piglets fed a fixed 1:1 blend of 9C+9S had a poorer feed conversion ratio (FCR = 1.80) than those fed a blend of 9C+9L (FCR = 1.4). The 9C and 9L combination groups showed better performance in both fixed blend and free choice feeding regimes. Conclusion: After abrupt weaning, they still have dependence on high oleic acid lipids as found in sow milk. A feeding regime offering free choice combination of lipids might give the possibility for piglets to cope better with the transition at weaning, but further research is needed.

• Journal of Communications and Networks
• /
• 제8권2호
• /
• pp.187-193
• /
• 2006

In this paper, we study the coexistence of orthogonal frequency division multiplexing (OFDM)-based systems beyond 3G (B3G) and point-to-point (P-P) fixed service (FS) microwave systems. The advanced general analytical model derived via a power spectral density (PSD) analysis proposed in this paper has two advantages in comparison with the conventional minimum coupling loss (MCL) method. First, the interfering signal power that appears in the band of a victim system can be easily assessed without a spectrum emission mask. Second, when transmit power is not allocated to some subcarriers overlapping the band of the victim system in order to mitigate B3G OFDM-based systems interference with other systems, the general analytical model can successfully assess the interference from the B3G systems into FS systems, whereas the MCL method incorporating the spectrum emission mask cannot be applied in the presence of the same interference condition. The proposed model can be derived in a closed form and is simply implemented with the help of simulation, and thus the solution can be obtained in significantly reduced time. Through application of the proposed model, coexistence results are analyzed in a co-channel and adjacent channel with respect to guard band and minimum separation distance.

• Journal of Communications and Networks
• /
• 제16권6호
• /
• pp.627-638
• /
• 2014

In this paper, we study the joint price and power allocation in spectrum sharing macro-femtocell networks. The proposed game theoretic framework is based on bi-level Stackelberg game where macro base station (MBS) works as a leader and underlaid femto base stations (FBSs) work as followers. MBS has fixed data rate and imposes interference price on FBSs for maintaining its data rate and earns revenue while FBSs jointly adjust their power for maximizing their data rates and utility functions. Since the interference from FBSs to macro user equipment is kept under a given threshold and FBSs compete against each other for power allocation, there is a need to determine a power allocation strategy which converges to Stackelberg equilibrium. We consider two cases for MBS power allocation, i.e., fixed and dynamic power. MBS can adjust its power in case of dynamic power allocation according to its minimum data rate requirement and number of FBSs willing to share the spectrum. For both cases we consider uniform and non-uniform pricing where MBS charges same price to all FBSs for uniform pricing and different price to each FBS for non-uniform pricing according to its induced interference. We obtain unique closed form solution for each case if the co-interference at FBSs is assumed fixed. And an iterative algorithm which converges rapidly is also proposed to take into account the effect of co-tier interference on interference price and power allocation strategy. The results are explained with numerical simulation examples which validate the effectiveness of our proposed solutions.

• 대한치과보철학회지
• /
• 제61권4호
• /
• pp.328-343
• /
• 2023

최근 삼차원적 안면 스캔 (facial scan) 및 악운동 (jaw motion) 등의 데이터를 통합하여 동적 교합을 나타내는 가상 환자를 형성함으로써 심미적인 전치부 고정성 보철물을 제작하는 방법이 소개되고 있다. 이를 통해 진단과정에서 환자와의 원활한 소통이 가능하며, 심미적인 보철 치료의 예지성을 높일 수 있고, 교합조정의 가능성을 낮출 수 있다. 본 증례에서는 상악 전치부 심미 보철 수복이 필요한 환자에서 구강 스캔 데이터와 삼차원 (3D) 안면 스캔데이터, 환자의 악운동 기록을 computer-aided design (CAD) 소프트웨어 상에서 통합하여 동적 교합을 나타내는 가상 환자를 형성하였다. 이를 통해 치료의 결과를 시뮬레이션하고 심미적인 상악 전치부 고정성 보철물을 제작 및 수복하였다. 또한, 안정적인 교합관계를 회복하고 적절한 전방유도가 형성되었는지 확인하기 위하여 각각 치료 단계별로 환자의 교합을 비교 평가하였으며 심미적, 기능적으로 만족스러운 결과를 보였기에 이를 보고하는 바이다.