• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.484-490
• /
• 1987

Diffusion coupling experiment was done to study expansion of body and soild reaction in BaCO3-TiO2 system. Specimen of BaCO3 and TiO2 was formed with Pt-mark's method. Each specimen was fired at interval of 25℃ from 900℃ to 1000℃ for 2hrs. After that, specimen was fixed with resin and polished. Product layers of specimen were observed with SEM and EDS. The result were following; 1. Diffusion component is Ba2+, which diffuse toward TiO2. 2. Large crack between layer of BaCO3 and Ba2TiO4 was generated because of difference of thermal expansion coefficient. 3. Ba2TiO4 is formed to TiO2 body by the reaction of BaTiO3 and BaO and its structure is very porous. 4. BaTiO3 changes immediately to Ba2TiO4 by the reaction of BaO. But BaTiO3 which formed by the reaction of TiO2 and Ba2TiO4 exsists as layer because the diffusion distance of Ba2+ is far.

• Korean Journal of Hydrosciences
• /
• v.4
• /
• pp.105-116
• /
• 1993

Areal Reduction Factor(ARF) has been developed and used to convert point Rainfall intensity-Duration-Frequency(I-D-F) to areal I-D-F in many countries. In Korea, though ARF was estimated in Han river basin by several researchers, it has some limitations to apply to other regions due to low denisity of rainfall gauging station and shortage of data. In this study ARF has been developed in area of relatively high density of rainfall gauging station, i.e., Pyungchang river(Han river), Wi stream(Nakdong river), and Bochung stream(Guem river) basin by geographically fixed-area method. And coefficient of variation of mean annual precipitation was presented to use ARE in other areas and its applicability was analyzed.

• Advances in environmental research
• /
• v.4 no.4
• /
• pp.211-218
• /
• 2015

Traffic noise estimation models are useful in evaluation of the noise pollution in current circumstances. They are helpful tools for design and planning new roads and highways. Measurement of average traffic noise level is possible when traffic speed and volume are known. The objective of this study was to devise a model for prediction of highway traffic noise levels based on current traffic variables in Iran. The design of this model was to take the impact of traffic congestion into consideration and to be field tested. This study is a library research augmented by field study conducted on Saeedi Highway located south west of Tehran. The period for the field study lasted 5 days from 7-12 February, 2013. This study examined liner and non-liner methods in formulation of its model. Liner method without a fixed coefficient was the best fit for the intended model. The proposed model can serve as a decision making tool to estimate the impact of key influential factors on sound pressure levels in urban areas in Iran.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.533-536
• /
• 1999

We consider digital implementation problems of continuous-time controllers. In general, digital controllers use fixed point representation of number and of finite word length(FWL). Under these conditions, this paper investigates the closed-loop stability caused by three design constraints; (i) finite precision representation of the controller parameters, (ii) realization forms such as direct form, cascade form, and parallel form, and (iii) sampling time. We calculate the coefficient stability margins of both predesigned controllers and controller to be implemented. This method can be applied to determine the word length, realization structure, and sampling time so that remains the stability.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1300-1302
• /
• 1998

Residual resistance ratio ( RRR ) of Cu/Nb-Ti Superconductor wire was evaluated by fixed point method. Our measured value of RRR showed good consistency with the average value obtained from round robin test conducted by IEC/TC 90. Our test results showed that the coefficient of variation ( COV ) was kept within 2 %

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.333-336
• /
• 1999

In this paper, a new high speed parallel input and parallel output GF(2$^{m}$ ) multiplier based on standard basis is proposed. The concept of the multiplication in standard basis coordinates gives an easier VLSI implementation than that of the dual basis. This proposed algorithm and method of implementation of the GF(2$^{m}$ ) multiplication are represented by two kinds of basic cells (which are the generalized and fixed basic cell), and the minimum critical path with pipelined operation. In the case of the generalized basic cell, the proposed multiplier is composed of $m^2$ basic cells where each cell has 2 two input AND gates, 2 two input XOR gates, and 2 one bit latches Specifically, we show that the proposed multiplier has smaller complexity than those proposed in 〔5〕.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1516-1519
• /
• 1996

In this paper, a study on the electrical properties of ternary compound ceramics $[(1-y-x)BaTiO_{3}-ySrTiO_{3}-xMgTiO_3]$ fabricated 7 samples with each mol[%] by using the mixed oxide method. In this case, the sintering temperature were at $1,250[^{\circ}C]$ for 2[hr]. Also made ceramic capacitors from 7 samples, temperature coefficient of the capacitance and the variation of relative dielectric constants and loss with fixed frequency (1KHZ) were studied. In some ceramic capacitors, has shown very good properties of the dielectric constants and loss. In case of BSM-11 ceramic capacitor, is sure to the commercial capacitor which shows steady properties.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.169-179
• /
• 1998

Median rank is used to systemize the evaluation of research personnel in a research institution. Suggested evaluation system is purposed to enhance the fairness, distinguish the factors of evaluation and maximize the synergy of researchers. The factors of evaluation are largely divided into the subjective and the objective factor. The final rank of the researchers is determined with the converted median rank value. The propriety of applying median rank is tested by Spearman's rank correlation coefficient. We also suggest the method of determining the rank of researchers. This evaluation system is not fixed in special case but can be changed in situation. It also can be applied to any other personnel evaluation system through the appropriate revision.

• The Journal of Fisheries Business Administration
• /
• v.46 no.3
• /
• pp.129-141
• /
• 2015

Because land based aquaculture is restricted by high investment per rearing volume and control cost, good management planning is important in Land-based aquaculture system case. In this paper master production planning was made to decide the number of rearing, production schedule and efficient allocation of water resources considering biological and economic condition. The purpose of this article is to build the mathematical decision making model that finds the value of decision variable to maximize profit under the constraints. Stocking and harvesting decisions that are made by master production planning are affected by the price system, feed cost, labour cost, power cost and investment cost. To solve the proposed mathematical model, heuristic search algorithm is proposed. The model Input variables are (1) the fish price (2) the fish growth rate (3) critical standing corp (4) labour cost (5) power cost (6) feed coefficient (7) fixed cost. The model outputs are (1) number of rearing fish (2) sales price (3) efficient allocation of water pool.

• Structural Engineering and Mechanics
• /
• v.6 no.1
• /
• pp.63-76
• /
• 1998

This paper presents dynamic responses of structures with sliding base which limits the translation of external loads from ground excitation. A discrete element model based on the discontinuous deformation analysis method is proposed to study this sliding boundary problem. The sliding base is simulated using sets of fictitious contact springs along the sliding interface. The set of contact spring is to translate friction force from ground to superstructure. Validity of the proposed model is examined by the closed-form solutions of an idealized mass-spring structural model subjected to harmonic ground excitation. This model is also applied to a problem of a three-story structural model subjected to the ground excitation of 1940 El Centro earthquake. Analyses of both sliding-base and fixed-base conditions are performed as comparisons. This study shows that using this model can simulate the dynamic response of a sliding structure with frictional cut-off quite accurately. Results reveal that lowering the frictional coefficient of the sliding joint will reduce the peak responses. The structure responses in little deformation, but it displaces at the end of excitation.