• 한국화재소방학회논문지
• /
• 제29권4호
• /
• pp.33-38
• /
• 2015

강구조 건축물의 바닥하중은 보부재를 통하여 기둥부재로 전달되며, 보부재는 양단 고정단 또는 단순보 조건으로 구성된다. 양단 고정단 강재보와 한단 힌지 그리고 타단 회전단의 단순보는 경계조건의 차이에 따라 전달되는 최대하중과 처짐 등 구조적 내력성능이 상이하나, 화재 시 내화성능 평가는 단순보의 경계조건으로 평가되고 있다. 따라서 본 논문에서는 강재보의 경계조건에 따른 내력적 성능의 차이를 확인하기 위하여 일반 구조용 강재(SS 400)의 고온특성을 적용한 열전달해석 및 열응력해석을 수행하였으며, 그 결과 동일한 보부재의 길이와 단면 조건하에서 부정정 구조물인 고정단 경계조건이 정정 단순보 경계조건에 비해서 내력과 처짐이 건전한 것으로 나타났다. 따라서 강재 보의 내화시험 시 단순보로 시험하는 것이 안전측으로 판단되었다.

• 대한토목학회논문집
• /
• 제38권6호
• /
• pp.851-857
• /
• 2018

본 연구에서는 전과정평가 방법론을 활용하여 고정단, 일방향, 양방향 교량용 포트받침의 제조 공정에 대한 LCA분석을 수행하여 각각의 대한 환경부하를 분석하였으며, 특히 최근 국내외적으로 이슈가 되고 있는 물발자국에 대한 분석을 수행하였다. LCA 분석 결과 고정단 포트받침의 경우 6대 영향범주 모두에서 후판에 의한 기여도가 64.2% 이상으로 분석되었으며, 특히 자원고갈 및 광화학적산화물생성 영향범주에서는 94% 이상의 기여도를 갖는 것으로 분석되었다. 일방향 및 양방향 포트받침의 경우 지구온난화 및 오존층 영향범주에서는 PTFE의 기여도가 가장 높게 분석되었으며, 그 외의 영향범주에서는 후판에 의한 기여도가 높게 나타났다. 포트받침 1개 제조시 형식별 물 이용가능 발자국 분석결과 일방향 $22.4m^3\;H_2O\;eq/ea$, 고정단 $17.1m^3\;H_2O\;eq/ea$, 양방향 $14.1m^3\;H_2O\;eq/ea$ 으로 분석되었다. life cycle 단계별 기여도 분석결과 3가지 유형 모두 제조단계의 용수 사용으로 인한 기여도가 65% 이상으로 분석되었다. 본 연구결과는 향후 교량 설계 및 시공단계의 공법 및 자재 선택시 의사결정 기초자료로 활용할 수 있을 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제3권2호
• /
• pp.153-167
• /
• 2011

Traditional design methods of bearing capacity of shallow foundations are deterministic in the sense that they do not explicitly consider the inherent uncertainty associated with the factors affecting bearing capacity. To account for such uncertainty, available deterministic methods rather employ a fixed global factor of safety that may lead to inappropriate bearing capacity predictions. An alternative stochastic approach is essential to provide a more rational estimation of bearing capacity. In this paper, the likely distribution of predicted bearing capacity of strip footings subjected to vertical loads is obtained using a stochastic approach based on the Monte Carlo simulation. The approach accounts for the uncertainty associated with the soil shear strength parameters: cohesion, c, and friction angle, ${\phi}$, and the cross correlation between c and ${\phi}$. A set of stochastic design charts that assure target reliability levels of 90% and 95%, are developed for routine use by practitioners. The charts negate the need for a factor of safety and provide a more reliable indication of what the actual bearing capacity might be.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.331-338
• /
• 2001

Seismic performances of the base isolated model of Five Story Stone Pagoda were studied through shaking table tests. Friction pendulum system (FPS), Pure-friction system with laminated rubber bearing (LRB) and Ball with rubber bearing were selected fur the comparison of performances. Performances of specially designed isolation systems were tested dynamically using shaking table. The test results of isolated model are compared with those of fixed base model. Compared with fixed base model, the isolated model showed that it could withstand much higer intensity of earthquake motion. The Effective Peak Ground Acceleration (EPGA) value of isolated model when the top component tipped over was above twice of that value in case of fixed base model. According to the additional test results, the lower value of coefficient of friction than that of common frictional base isolation systems is more effective to protect the piled multi-block system of Pagoda against moderate intesity of ground motion.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.29-36
• /
• 2006

Micro drilling by high-speed air bearing spindle is very useful manufacturing technology in electronic industry For the design of high speed air bearing spindle, there are considered stability of air bearing spindle, allowable load of air bearing, run out and tooling system design for micro drill's attach and remove. According to suggested details, we designed and manufactured high-speed air bearing spindle and carried out performance estimation such as run out, temperature change in running air bearing spindle, stiffness, chucking torque. Results are follows; Run out was measured under $5{\mu}m$ at air bearing spindle revolution $20,000\sim125,000rpm$. High speed air bearing spindle's temperature rose about $20^{\circ}C$ after 5 minutes from running and then was fixed. Allowable thrust load of spindle was 17kgf. Chucking torque of collet was 15kgfcm.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1305-1313
• /
• 2000

In a co-rotating scroll compressor, both scrolls rotate on their fixed axes contrary to the conventional orbiting type scroll machine. This implies fixed locations and directions of the gas pressure force and sealing force. Because the tilting moment is mainly caused by interplay between the resultant force of above forces and bearing reaction force, the variation during one cycle is relatively small. Under real operation, this moment is balanced by the restoring moment created by the reaction between the baseplate and thrust bearing or between the scroll tip and baseplate. If these reactions become too large, greater torque is required due to increased friction in addition to the wear of mating parts. Consequently, appropriate study and minimization of tilting moment is important in the design of scroll machines. In this study, taking into account of the small variation of tilting moment during one cycle, we minimize the moment and thrust bearing reaction force by a properly designed back pressure chamber. As a result, for both the driving and driven scrolls, the tilting moment and the reaction force of thrust bearing can be minimized. And the stability is improved for all cases.

• Tribology and Lubricants
• /
• 제29권6호
• /
• pp.386-391
• /
• 2013

Part I of this study analyzed the effects of tilting pad bearing designs to reduce the stiffness of the bearings used in a process high-speed lightweight centrifugal compressor intended for a domestic refinery use. This was done in an attempt to enhance the robustness of its rotordynamic stability against possible aerodynamic cross-coupled stiffness. The bearing design variables reviewed were the clearances, LBPs, LOPs, and preloads. The results showed that there was practically no difference between the LBP and LOP designs in terms of the bearing stiffness, because the compressor rotor was lightweight and the bearings had relatively high preloads. Increasing both the machined and assembled clearances in bearing designs has resulted in the bearing stiffness being greatly reduced. In addition, it has been confirmed that an additional reduction in the bearing stiffness can be obtained for given fixed machined clearances by decreasing the preloads, i.e., by increasing the assembled clearances.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.54-61
• /
• 2010

The additional axial force of CWR(continuous welded rail) is occurred by structure-track interaction, in reverse, fixed supports of structure are applied the large load by that. Ratio of load which transferred on support through the bridge superstructure with one-side REJ by acceleration and braking load are stated in High-Speed Rail Design Criteria(2005). On the other hand the horizontal forces of support delivered to the load due to thermal loads has been no report about the criteria. Therefore, this study was performed the review of the reaction and displacement on support by structure-track interaction in a special bridge(composite brdiges, 45+55+55+45=200m) with REJ acting on the temperature load. As a result, because fixed support of a special bridge or a continuous bridge with REJ under the temperature load which is constant load has been acted the large lateral load by structure-track interaction, when determining the fixed bearing capacity of structure should be reflected in the results to secure the safety of structures was confirmed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.799-805
• /
• 1996

In many cases, the magnetic farce model is linearized at the origin in designing the controller of a magnetic bearing system. However. this linear assumption is violated by the unmodeled nonlinear effect such as sensor dislocation and backup bearing dislocation. Therefore, a direct probe into the nonlinear magnetic force model in an active magnetic bearing system is necessary. To analyze the nonlinear magnetic force model of a magnetic bearing system, phase plot analysis which is to plot the numerical solution of the nonlinear equation in several initial points in the interested region is applied. Phase plot analysis is used to observe a nonlinear dynamic system qualitatively (not quantitatively). With this method, we can get much useful information of the nonlinear system. Among this information, a bifurcation graph that represents stability and locations of fixed points is essential. From the bifurcation graph, a stability criterion of magnetic bearing system is derived.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.68-73
• /
• 2009

This paper deals with the dynamic characteristics of the impeller shaft model which is the most important part in developing the resin mixing machine. The can is rotating by air motor in mixing machine. Then the end of shaft is fixed. The bearing support is to increase the fundamental natural frequency. The natural frequency analysis using finite element analysis software are performed on the imported commercial impeller shaft model. This paper presents calculated bearing stiffness of Soda, Harris and modified Harris formula considering contact angle according to bearing supported position. The most important fundamental natural frequency of the impeller shaft except bearing support is around 13.932 Hz. This paper presents one bearing and two bearings support position to maximize the 1st natural frequency. The maximized fundamental natural frequency is around 48.843 Hz in one bearing support and 55.52 Hz in two bearings support.