• 제목/요약/키워드: fixation of copper

검색결과 16건 처리시간 0.024초

Fixation and Leaching Characteristics of CCA- and CCFZ- Treated Domestic Softwood Species

  • Kim, Jae-Jin;Kim, Hyung-Jun;Ra, Jong-Bum;Chun, Su Kyoung;Kim, Gyu-Hyeok
    • Journal of the Korean Wood Science and Technology
    • /
    • 제31권6호
    • /
    • pp.55-59
    • /
    • 2003
  • The fixation and leaching characteristics of chromated copper arsenate (CCA Type C) and chromium- copper-fluoride-zinc (CCFZ) in domestic softwood (Japanese red pine, Korean pine, and Japanese larch) sapwood were investigated using the expressate method to follow chromium fixation and the American Wood-Preservers' Association (AWPA) leaching procedure to determine leaching properties after fixation. The rates of fixation were affected by preservative types; CCA was fixed much faster than CCFZ for all species evaluated. There were definite differences in the fixation rates of different species, with Korean pine requiring shorter to fix than the other species evaluated. Chromium fixation was greatly enhanced by elevated temperatures, and fixation time can be estimated according to fixation temperatures applied. The percentage of arsenic and zinc leached from domestic softwoods was relatively high compared to chromium and copper, indicating that there is still a relatively high unfixed arsenic and zinc components after complete chromium fixation in CCA-and CCFZ-treated samples, respectively.

표면전하밀도(表面電荷密度)를 이용(利用)한 동(銅)·크롬·비소계(砒素系) 방부방충제의 정착(定着)에 관(關)한 연구(硏究) (Evaluation of Copper-Chromium-Arsenic Preservatives Fixation on Wood by Measuring the Density of Surface Electric Charge)

  • 김영숙
    • Journal of the Korean Wood Science and Technology
    • /
    • 제18권1호
    • /
    • pp.24-30
    • /
    • 1990
  • This study was attempted to propose a method evaluating fixation of active ingredients in Copper-Chromium-Arsenic preservatives treatment. Fixated amount of active ingredients on wood was obtained by measuring the density of surface electric charge based on $\varsigma$ potential. Data accumulated from density of surface electric charge showed that the fixated amount of preservatives on wood increased linearly as concentration of treating solution increaced, which indicatied quantitative reactions in fixation of preservatives.

  • PDF

옥외 내구성 향상을 위한 목재보존제의 최근 연구 동향 - 구리 기반 약제를 중심으로 - (Current Research Trends in Wood Preservative for Enhanced Durability : A Literature Review on Copper Based Preservatives)

  • 김영숙
    • Journal of the Korean Wood Science and Technology
    • /
    • 제40권3호
    • /
    • pp.212-227
    • /
    • 2012
  • 본 연구에서는 CCA일몰 후, 내구성 향상을 위한 목재보존제의 최근 국제적 연구 동향에 대해 조사 연구하였다. 가압용 약제로 많이 사용되고 있는 최근의 구리 기반 약제의 형태는 수용성으로 ACQ나 CuAz 등의 구리 정착 개선 및 유효성분의 용탈 방지 등이 이슈화 되어 있으며, 미분화(micronized copper) 또는 나노 크기 입자를 이용한 유제형 약제 출현으로 이들의 목재 내 침투 및 정착 특성 연구 등에 대한 논란이 많은 상황이다. 또한 CCA와 달리 현재의 alkyl ammonium quat. 또는 azol 약제 등의 경우에는 구리 내성균에 대해 항균성 감소가 많아 이에 대비한 co-biocide 개발이 심각하게 요구되고 있다.

기상열화가 방부처리재의 구리성분 용탈에 미치는 영향 (Effect of Accelerated Weathering on the Leaching of Copper from Preservative Treated Wood)

  • 이명재;이동흡;김규혁
    • Journal of the Korean Wood Science and Technology
    • /
    • 제31권4호
    • /
    • pp.38-43
    • /
    • 2003
  • 본 연구는 앞서 발표한 「수용성 방부처리재의 촉진 기상열화 저항성 평가」의 부속실험으로서 기상열화가 방부처리재의 유효성분 중 구리의 용탈에 미치는 영향을 평가하기 위하여 수행되었다. ACQ, CCA, CuAz 처리시편을 대상으로 실시한 자외선 조사 유무에 따른 기상열화 조건에서 공통된 유효성분인 구리의 용탈량은 방부제의 종류에 관계없이 인공강우만 실시했을 때보다 자외선 조사를 함께 겸했던 시편에서 높게 나타났다. 방부처리 전후와 방부처리재의 촉진열화 전후의 목재표면을 FTIR을 이용하여 분석하였는데, 그 결과 구리가 정착되는 것으로 판단되는 1731 cm-1, 1625 cm-1, 1510 cm-1 흡수대가 촉진열화에 의해 큰 변화를 나타냈다. 이는 리그닌과 결합되었던 구리가 리그닌의 자외선 열화시 리그닌과 함께 용출 되었음을 시사한다.

크롬-구리 화합물계(化合物系) 목재방부제(木材防腐劑)의 정착(定着) 및 용탈특성(溶脫特性) 비교(比較) (A Comparison of Chromium and Copper-Containing Waterborne Wood Preservatives for Fixing and Leaching Characteristics)

  • 라종범;김규혁
    • Journal of the Korean Wood Science and Technology
    • /
    • 제23권3호
    • /
    • pp.66-72
    • /
    • 1995
  • The rate of fixation of the components were evaluated in CCA-Type B and CCFZ-treated radiata pine sapwood by quantitative analysis of solution expressed from the treated wood. The leaching characteristics of radiata pine blocks treated with CCA-Type B and CCFZ were also evaluated by the AWPA standard leaching test. Both fixation and leaching charactersistics of CCA-Type B were compared with CCA-Type C treated wood samples. The rate of CCA-Type B fixation was a little faster than that of CCFZ. However, significant amounts of arsenic was unfixed in the CCA-Type B treated samples and consequently leached. These significant quantities of arsenic liberated from the CCA-Type B treated wood during service may pose some environmental concerns. Arsenic was no longer detectable from CCA-Type C treated samples when fixation was complete, even though the fixation of CCA-Type C was slower in some degree than CCA-Type B. In summary, it could be said that CCFZ was much safer preservative than CCA-Type B by the criterion based on the relative hazard assessed by absolute amount of unfixed element present in the treated wood. Also the decision that CCA preservative has to move from Type B to Type C should be made sooner or later for continuous use of CCA preservative in the future.

  • PDF

백합나무 스킨팀버의 ACQ, CUAZ, CuHDO 가압처리를 위한 처리용 목재의 적정 함수율 및 처리목재의 정착 특성 평가 (Evaluation of Pretreatment Moisture Content and Fixation Characteristics of Treated Wood for Pressure Treatment of Yellow Poplar Skin Timber with ACQ, CUAZ and CuHDO)

  • 김민지;최용석;김규혁
    • Journal of the Korean Wood Science and Technology
    • /
    • 제43권6호
    • /
    • pp.810-817
    • /
    • 2015
  • 본 연구는 백합나무 스킨팀버의 ACQ-2, CUAZ-3, CuHDO-1 가압처리 특성을 평가하기 위해 수행되었다. 일차적으로 백합나무 변재부와 심재부 시험편을 대상으로 처리용 목재 함수율이 방부제 처리도에 미치는 영향을 평가하고, 방부제 유효성분인 구리의 처리목재 내 정착 특성을 조사하였다. 본 연구 결과에 의하면 백합나무 변재부는 방부제 종류에 관계없이 조사된 목재함수율 범위(50% 이하)에서 사용환경 범주 H3용 처리목재의 침윤도와 흡수량 기준을 모두 만족하였다. 백합나무 변재부의 방부제 보유량 경사를 조사한 결과, 국립산림과학원 고시 제2011-04호에 제시된 처리용 목재의 함수율(평균 30% 이하)을 만족할 경우 재면으로부터 15 mm 깊이까지에서 사용환경 범주 H3용 처리재의 흡수량 기준을 충족하였다. 백합나무 심재부는 처리도가 매우 불량하여 처리용 목재의 함수율 조건 및 방부제 종류에 관계없이 사용환경 범주 H3용 처리목재의 침윤도와 보유량 기준을 모두 만족시키지 못하였다. 백합나무 변재 및 심재 시험편 공히 비건조 양생보다 건조 양생에서 구리의 정착속도가 빠르고 또한 최종 구리 정착율이 높았으며, 3주간 비건조 양생 후 구리 정착율이 90% 수준에 머물었으며 양생기간을 연장하더라도 정착율은 크게 개선되지 않았다.

목재방부리(木材防腐理)에 있어서 구리화합물(化合物) 정착제(定着濟)로서 키토산 이용(利用)에 관한 연구(硏究) (Studies on Utilization of Chitosan for Fixation of Copper Compound in Wood Preservative Treatment)

  • 이종신
    • Journal of the Korean Wood Science and Technology
    • /
    • 제25권4호
    • /
    • pp.92-98
    • /
    • 1997
  • To make good use of chitosan forming complex with heavy metals in wood preservative treatment, woods impregnated with chitosan and copper sulfate were prepared. Amounts of leached copper, decay resistance, anti-mold efficacy, iron corrosion rates, moisture regain rates and degradation pattern in chitosan pre-treated and untreated wood were compared. After leaching test, amounts of leached copper from chitosan pre-treated wood had a much smaller than chitosan untreated wood, and good decay resistance was retained even after leaching test. From these results, it was proved that chitosan-copper complex formed in wood played and important role for decay durability. In chitosan pre-treated wood, damage values by test molds became remarkably smaller, but the growth of test molds was not perfectly inhibited. Distinct differences in iron corrosion rates between chitosan pre-treated and untreated woods was not recognized but chitosan pre-treated wood showed the lower moisture regain rates than chitosan untreated wood because of water insoluble chitosan membrane formed in wood. After leaching test, the tracheid walls in the wood treated with 2.0% copper sulfate only were eroded by the fungal attacks, but those in the wood pre-treated with chitosan remained almost intact.

  • PDF

소나무와 낙엽송 스킨팀버의 ACQ, CUAZ, CuHDO 가압처리를 위한 처리용 목재의 적정 함수율 및 처리목재의 정착 특성 평가 (Evaluation of Pretreatment Moisture Content and Fixation Characteristics of Treated Wood for Pressure Treatment of Japanese Red Pine and Japanese Larch Skin Timber with ACQ, CUAZ and CuHDO)

  • 최용석;오세민;김규혁
    • Journal of the Korean Wood Science and Technology
    • /
    • 제39권6호
    • /
    • pp.481-489
    • /
    • 2011
  • 본 연구에서는 소나무와 낙엽송 스킨팀버의 ACQ-2, CUAZ-2, CuHDO-1 가압처리 특성을 평가하기 위해 소나무 변재부와 낙엽송 심재부 시험편을 대상으로 처리용 목재의 함수율이 방부제 처리도에 미치는 영향과 방부제 유효성분인 구리의 처리목재 내 정착 특성을 조사하였다. 본 연구 결과에 의하면 소나무 변재부는 방부제 종류에 관계없이 함수율 30%부터 사용환경 범주 H3용 처리목재의 침윤도와 흡수량 기준을 모두 만족하였다. 완벽한 방부제 침투가 가능한 소나무 변재부에서 깊이에 따른 방부제 흡수량 경사를 조사한 결과, 방부제 종류에 따른 차이가 관찰되었다. CuHDO-1 처리 시험편에서 발생한 경사가 ACQ-2와 CUAZ-2 처리 시험편에서의 경사보다 심했는데, 특히 고함수율(25, 30%) 시험편에서 경사가 저함수율(15, 20%) 시험편에서보다 심함을 알 수 있었다. 그러나 난주입성인 낙엽송 심재부는 처리용 목재의 함수율 조건 및 방부제 종류에 관계없이 처리도 가 매우 불량하였다. 낙엽송 심재부의 처리도 개선을 위해 증기 전처리($121^{\circ}C$의 포화수증기 조건에서 12시간 처리)를 실시한 결과, 낙엽송 심재부의 침윤도와 흡수량 모두 사용환경 범주 H3용 처리목재 기준에 부합하게 처리도가 개선됨을 확인할 수 있었다. 소나무 변재부와 낙엽송 심재부 시험편에서 공히 방부제 유효성분인 구리의 정착이 비건조 양생에 비하여 건조 양생에서 빨리 진행되었다. 소나무 변재부는 양생 초기 3~6일, 낙엽송 심재부는 양생 1일 이내에 3주간 정착된 구리 양의 95% 이상이 정착되었다. 양생 3주 후 처리목재 내에 미정착 상태로 남아있는 구리의 양은 ACQ-2, CuHDO-1, CUAZ-2 순으로 많았는데, 이는 처리용 작업액에 존재하는 구리의 양과 비례하였다.

옥외 내구성 향상을 위한 목재보존제의 최근 연구 동향 -비 구리계 약제를 중심으로- (Current Research Trends in Wood Preservatives for Enhancing Durability - A Literature Review on Non-Copper Wood Preservatives -)

  • 김영숙
    • Journal of the Korean Wood Science and Technology
    • /
    • 제41권3호
    • /
    • pp.187-200
    • /
    • 2013
  • 본 연구에서는 목재보존제의 최근 국제적 동향 중, 비 구리계 약제를 중심으로 조사되었다. 최근의 목재보존제 연구 분야에서 다루어지는 비 구리계 약제로는 환경친화적 수용성약제 성분의 대표적인 붕소계 화합물이 가장 많았고, 자연에서 얻어지는 천연물질을 이용한 약제, 화학처리목재, pyrethroid계 방충제 등이 포함되었다. 인축 및 환경에 대한 사용안전성이 고려된 약제들이 주 연구대상이 되는 경향이 있었다. 붕소의 경우에는 옥외 사용 시 물에 대한 용탈성을 개선하기 위하여 다양한 고분자 등의 물질을 도입하여 정착성을 높이고자 하는 연구들이 주요 이슈였다. 또한 의학 분야에서 많이 다루어지던 천연물질이 목재보존제로써 사용하고자 하는 시도와 치수안정성을 목적으로 개발되었던 아세틸화 목재와 같은 화학수식목재에 대한 옥외 사용 시도가 눈에 띄게 증가된 경향을 나타내었다.

첨가제에 의한 연탄제독에 관한 연구 (A Study on Detoxication of Coal Briquette by Additives)

  • 장두원;어용선;손연수
    • 대한화학회지
    • /
    • 제30권1호
    • /
    • pp.118-125
    • /
    • 1986
  • 약 15g 정도의 소형탄 연소시험 장치를 고안, 제작하여 여러종류의 촉매능이 있는 전이 금속 계열의 화합물, 천연광물 및 산화제등이 첨가된 소형탄 연소시험을 실시하였다. 이들 여러 첨가제중에서 구리성분이 가장 우수한 CO억제효과를 나타냈으며 같은 구리성분의 경우에도 산화물의 형태로 표면적이 넓은 ${\gamma}-Al_2O_3$와 같은 지지체에 분산시켜 사용하는 경우가 가장 효과적이었다. 이 때 구리성분으로 연탄에 대하여 0.5% 첨가하므로서 착화 및 연소초가 CO함량을 1.4 %, 연소말기에는 0.3 %로 낯출수 있었다. 또한 연탄 연소 배기가스중의 황화합물을 줄이기 위한 칼슘화합물의 황고정 효과도 정량적으로 검토하였다.

  • PDF