• 대한소아치과학회지
• /
• 제34권3호
• /
• pp.498-505
• /
• 2007

매복치의 치료는 발생 원인, 치아 발육 상태, 매복 위치 및 맹출 경로, 맹출 공간 여부, 환자의 연령이나 협조도 등을 고려하여 시행하며 방해 요인 제거 후 자연 맹출 관찰, 매복치의 외과적 노출 후 교정적 견인, 매복치의 재위치 또는 치아이식, 발거 후 보철수복을 할 수 있다. 이 중 치아이식은 매복치가 맹출 경로를 크게 벗어나 외과적인 노출과 교정적 견인이 어려운 경우 시행할 수 있다. 자가치아이식의 성공을 위해 이식치아의 외상을 최소화하며 치주인대의 생활력을 보존하는 것이 중요하다. 본 증례에서는 상악 좌측 견치의 미맹출을 주소로 내원한 10세 여자 환자에서 Rapid Prototyping model을 이용하여 자가치아이식술을 시행하였다. RP technique을 이용하여 제작한 공여치의 모델로 수용부의 골와동 형성을 공여치 발치전에 미리 시행함으로써 공여치의 구강 외 소요시간을 단축시키고 공여치를 수용부에 여러 번 시적할 때 생길 수 있는 치근 손상을 최소화할 수 있었다. 치료 후 상악 좌측 견치는 6개월 후 치근 흡수 등의 합병증 없이 정상 치아 동요도와 타진시 음성을 나타내었으며 전기치수검사에서 양성 반응을 보였다.

• 천문학논총
• /
• 제32권1호
• /
• pp.131-133
• /
• 2017

We present the latest results from the Mission Program NIRLT (PI: I.Yamamura), the near-infrared spectroscopy of brown dwarfs using the AKARI/IRC grism mode with the spectral resolution of ~ 120. The near-infrared spectra in the wavelength range between 2.5 and $5.0{\mu}m$ are especially important to study the brown dwarf atmospheres because of the presence of major molecular bands, including $CH_4$ at $3.3{\mu}m$, $CO_2$ at $4.2{\mu}m$, CO at $4.6{\mu}m$, and $H_2O$ around $2.7{\mu}m$. We observed 27 sources, and obtained 16 good spectra. Our model fitting reveals deviations between theoretical model and observed spectra in this wavelength range, which may be attributed to the physical condition of the upper atmosphere. The deviations indicate additional heating, which we hypothesize to be due to chromospheric activity. We test this effect by modifying the brown dwarf atmosphere model to artificially increase the temperature of the upper atmosphere, and compare the revised model with observed spectra of early- to mid-L type objects with $H{\alpha}$ emission. We find that the chemical structure of the atmosphere changes dramatically, and the heating model spectra of early-type brown dwarfs can be considerably improved to match the observed spectra. Our result suggests that chromospheric activity is essential to understand early-type brown dwarf atmospheres.

• 복식
• /
• 제57권5호
• /
• pp.58-71
• /
• 2007

This study conducted a survey to find out atopic dermatitis patients' required performance and preference in design factors to develop spring/summer(S/S) knitwears preferred by atopic patients. On the platform of achieved information from statistical analysis, S/S knitwear samples for atopic patients were designed and constructed with cotton/Seacell(R) blended yarn, And subjective wearing sensation were evaluated comparing the samples and the commercial products made with cotton/chitosan blended yarn, trying to help producing more comfortable S/S knitwears for atopic patients. SPSS 12.0 program was used for frequency analysis, Chi-square analysis, ANOVA, and Duncan test. The result was as follows; For comfort of S/S knitwears, atopic patients most considered skin care property. Atopic patients preferred simple and basic knitwear in light color with thin and soft fabric such as plain knit. The preferred style was that 'appropriately fit with suitable ease'. They also preferred 'closed front'; 'boat neckline' and 'V neckline'; 'raglan sleeve' and 'set-in sleeve'. For hem trim, they preferred 'rib' structure. Male preferred simple and plain style with 'round collar' and 'tubular or rib trim", while female preferred sophisticated and characteristic style with 'set-in sleeve' with 'rib trim'. Under the circumstances with insufficient functional knitwears developed, this study tried to develop comfort S/S knitwears for atopic dermatitis patients and the developed knitwears showed as good as or better performance in wearing feeling, fitting, and appearance than the previously developed functional goods.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.87-95
• /
• 2012

In recent years, laser-arc hybrid welding has begun to be adopted for assembly welding of automotive bodies and parts, because the hybrid welding process can weld lapped steel sheets having a larger gap than is possible with laser welding. In this paper, to predict the twist deformation by the hybrid welding when brackets are welded in B pillar of a passenger car, the residual stress using CAE is analyzed and the deformation result of CAE is compared with the measured deformation. First of all, after modeling heat source as intended to be expressed with laser-arc hybrid welding method, heat source fitting is done with welding conditions and a section of welding part obtained through specimen test. In case of heat source functions, laser used conical source and arc used double ellipsoid source. Through the local model analysis, elements which are located in the center of the model are selected. The elements are called WME(Welding Macro Element). This WME is extruded in the welding lines and welding phenomenon of complex parts is accomplished. The deformation amount after hybrid welding is got through a simulation, the validity of simulation is verified by measuring the panel and comparing with the simulation result.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권2호
• /
• pp.9-15
• /
• 2020

This study was conducted to investigate the in situ formation of amorphous Fe oxides as a stabilization technology in As-contaminated soil. After addition of ferric nitrate and the neutralizing agent, most of extractable fractions of As in soil (i.e., SO₄^2- and PO₄^3--extractable As) was converted into As bound to amorphous Fe oxides. In addition, results of solubility bioavailability research consortium (SBRC) test indicated that a significant amount of As in untreated soil changed to a non-bioaccessible form after stabilization. The reason was attributed to the newly formed amorphous Fe oxides in the stabilized soil, which was confirmed by linear combination of fitting (LCF) using X-ray absorption spectroscopy (XAS) analysis. Interestingly, after five months of aging of the stabilized soil, ferrihydrite and schwertmannite newly formed in the soil were transformed to crystalline Fe oxides such as goethite, and further decrease in SBRC extractable fraction of As was observed. The results suggest that co-precipitated As with amorphous Fe oxides can be further immobilized with time, due to the crystallization of amorphous Fe oxides.

• 응용통계연구
• /
• 제24권2호
• /
• pp.269-278
• /
• 2011

스코어 변수의 민감도와 특이도와의 관계로 표현한 ROC 곡선을 더욱 정확한 진단을 위하여 분포함수와 공변량을 고려한 연구가 많이 진행되었다. 공변량을 고려하는 회귀분석 방법을 사용하였으며 이때 분포함수를 정규분포로 가정하거나 잔차의 분포함수를 추정하여 ROC 분석을 하였다. 본 연구는 분포함수가 주어지지 않으며 진단에 영향을 주는 공변량을 모르는 일반적인 상황에서 논의하였다. 확률변수인 스코어와 두 개의 보모집단으로 구성된 신용평가 자료에 적합한 분포함수를 추정하기 위하여 여러 개의 정규분포가 혼합된 정규혼합분포를 사용하여 ROC 분석을 한다. 고전적인 비모수적이고 경험적인 ROC 곡선에 적합한지를 파악하기 위하여 AUC 통계량을 사용하여 비교하며, 본 연구에서 제안한 정규혼합분포를 이용한 ROC 곡선이 다른 방법으로 구한 ROC 곡선보다 적합함을 보였다.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.31-38
• /
• 2004

기계부품의 설계는 초기 설계, 해석, 성능 평가의 반복 과정을 통하여 수행된다. 설계자는 각 과정에서 특성에 맞는 프로그램을 사용하고 있다. 본 연구에서는 순차 설계 영역을 이용한 형상최적화를 수행하였다. 순차 설계영역의 근사함수를 구하기 위하여 Pro/Engineer 와 ANSYS 실행의 자동화를 수행하였다. 전체 설계영역을 근사식으로 표현하기에는 어려움이 있다. 정확도가 높은 근사식을 만들기 위하여 순차설계영역을 설정하여 각 단계에서 수렴한 해로 이동량을 결정하고, 두 번 연속하여 순차설계 영역에 존재하면 수렴조건을 만족하는 것으로 하였다. 각 단계의 해는 순차이차 계획법인 PLBA(Pshenichny-Lim-Belegundu Arora)알고리즘을 이용하여 구하였다.

• 한국농공학회지
• /
• 제45권5호
• /
• pp.97-109
• /
• 2003

This study is mainly conducted to derive the design drought rainfall by the consecutive duration using probability weighted moments with rainfall in the regional drought frequency analysis. It is anticipated to suggest optimal design drought rainfall of hydraulic structures for the water requirement and drought frequency of occurrence for the safety of water utilization through this study. Preferentially, this study was conducted to derive the optimal regionalization of the precipitation data that can be classified by the climatologically and geographically homogeneous regions all over the regions except Cheju and Ulreung islands in Korea. Five homogeneous regions in view of topographical and climatological aspects were accomplished by K-means clustering method. Using the L-moment ratio diagram and Kolmogorov-Smirnov test, generalized extreme value distribution was confirmed as the best fitting one among applied distributions. At-site and regional parameters of the generalized extreme value distribution were estimated by the method of L-moments. Design drought rainfalls using L-moments following the consecutive duration were derived by the at-site and regional analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design drought rainfall derived by at-site and regional analysis in the observed an simulated data were computed and compared. In has shown that the regional frequency analysis procedure can substantially more reduce the RRMSE. RBIAS and RR in RRMSE than those of at-site analysis in the prediction of design drought rainfall. Consequently, optimal design drought rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• Geomechanics and Engineering
• /
• 제3권4호
• /
• pp.291-321
• /
• 2011

The paper describes a simple numerical FLAC model that was developed to simulate the dynamic response of two instrumented reduced-scale model reinforced soil walls constructed on a 1-g shaking table. The models were 1 m high by 1.4 m wide by 2.4 m long and were constructed with a uniform size sand backfill, a polymeric geogrid reinforcement material with appropriately scaled stiffness, and a structural full-height rigid panel facing. The wall toe was constructed to simulate a perfectly hinged toe (i.e. toe allowed to rotate only) in one model and an idealized sliding toe (i.e. toe allowed to rotate and slide horizontally) in the other. Physical and numerical models were subjected to the same stepped amplitude sinusoidal base acceleration record. The material properties of the component materials (e.g. backfill and reinforcement) were determined from independent laboratory testing (reinforcement) and by back-fitting results of a numerical FLAC model for direct shear box testing to the corresponding physical test results. A simple elastic-plastic model with Mohr-Coulomb failure criterion for the sand was judged to give satisfactory agreement with measured wall results. The numerical results are also compared to closed-form solutions for reinforcement loads. In most cases predicted and closed-form solutions fall within the accuracy of measured loads based on ${\pm}1$ standard deviation applied to physical measurements. The paper summarizes important lessons learned and implications to the seismic design and performance of geosynthetic reinforced soil walls.