• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.64-76
• /
• 2014

In the image acquisition tests of image sensors and modules, how to compare pixel values, how to digitize "defect", and how to determine "fault" are extremely varied from test equipments. Therefore, setup of test equipments for image acquisition characteristics should be customized for target devices under test. In general, test procedures are delivered as technical documents in not standardized but arbitrary formats. So test equipment should be manually programmed fitting individual setup condition. This costs huge time and effort and has high risk of human error. In this paper, the standardized description method is proposed to apply to almost all existing tests where various tests are described in a single framework.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.7
• /
• pp.55-64
• /
• 2009

In this study, improved test methods, which consider the real site test conditions, were suggested to measure for geosynthetics chemical resistance. For this purpose index and performance tests were done to specify and regulate the test method most approaching to the installation condition and accelerated model by Arrhenius equation was applied to interpretate the experimental data. Through the analysis and comparison of the overall experimental results, we could suggest the possibility and setup of the advanced chemical resistance test method for geosynthetics fitting to the field installation conditions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.50-66
• /
• 2010

This Shanghai region study is a sample survey of female college students in their early 20s. This study collected and analyzed the information of shapes through a direct contact survey to understand the breast figures and the measurements of bodies to provide basic information to improve brassiere production for adult females in China. Data was analyzed through a SAS 9.0. The characteristic of the final brassiere pattern that had been corrected and complemented from the results of the $l^{st},\;2^{nd},\;3^{rd}$, and $4^{th}$ fitting tests is defined as a brassiere inserted with a round wire that has the 3/4cup to wrap the bust area by about 3/4. It consists of an upper and lower nonwoven fabric cup that has a flat-shaped wing of a circular dart. The drawing method of the pattern of this brassiere is applied with the conditions to cover the body naturally under the diverse and organic relations of the material factor of stretch material and wire, functional factor, and sewing factor. The final pattern is created as a bigger angle of wing pattern and a short inner side diameter because there are more Chinese women with a back of bending figure compared to Korean women.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.1073-1081
• /
• 2006

The development of foundation garment pattern on the typical adult women's body was carried out. By means of the flatted body surface shell, the foundation garment pattern was developed. And its fitting test also performed. The results of this study can be summarized as follows; 1. The investigated Foundation basic pattern was made by the allowing the maximum bust size without any surplus since it was based on the tight-fitted model drawing technique. The investigated the completed pattern was designed in three parts of front and back body, including bust. 2. The result showed by overlapping the torso basic pattern foundation and body surface development selected from body almost the same except for the shift of dart position. 3. The result by overlapping basic pattern 3 existing basic patterns. On the basis of top-bust line showed that the setting up the volume of dart of bust and its waist affect the appearance of model. Especially, it was found that the above result was related to the bust and under bust line. 4. The result of the wearing test of 3 existing basic patterns and basic pattern of this study revealed that the mean values of whole items were higher than average in type P and type E. The fitting & position of under-bust line and extent of wrapping bust showed the high points in the current study and type of P. The result of evaluating the whole appearance in three points(front, side, back) showed different according to the every basic foundation garment pattern.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.929-938
• /
• 2017

This research investigated the effects of cool touch fabrics on thermo-regulating physical properties and subjective evaluation using a 3D fitted women's T-shirts in wear test. Qmax, clothing microclimate, microclimate wettedness, thermogram and subjective vote were observed during rest-right after an exercise-rest protocol. As a result, there was no single determining physical variable to explain the reasons of cool sensations of T-shirts made of cool touch fabric across the entire protocol. Qmax could partly predict a wear sensation at the initial stage when only insensible perspiration was presented. Simultaneous observation of temperature/humidity gradient understand from the inside to the outside of the clothing layer or microclimate wettedness calculated using vapor pressure were helpful to figure out the performance of cool touch fabric, especially at the later stage of the protocol when sweating was excessive. It was especially difficult to connect thermo-regulating physical variables to the subjective evaluation during transient conditions such as 'right after exercise' stage. It is necessary to measure the amount of heat and moisture transferred from the skin to the outside of clothing along with the physical properties measured in this study to understand the detailed mechanisms of why a cool sensation is evoked from tight fitting T-shirts made of newly developed cool touch fabrics.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.3
• /
• pp.100-116
• /
• 1993

It is experienced fact that unreasonable design criterion and unsitable operation management for the agricultural structures including reservoirs based on short terms data of monthly flows have been brought about not only loss of lives, but also enormous property damage. For the solution of this point at issue, this study was conducted to simulate long series of synthetic monthly flows by multi-season first order Markov model with selection of best fitting frequency distribution and to make a comparison of statistical parameters between observed and synthetic flows of six watersheds in Yeong San and Seom Jin river systems. The results obtained through this study can be summarized as follows. 1.Both Gamma and two parameter lognormal distribution were found to be suitable ones for monthly flows in all watersheds by Kolmogorov-Smirnov test while those distributions were judged to be unfitness in Nam Pyeong of Yeong San and Song Jeong and Ab Rog watersheds of Seom Jin river systems in the $\chi$$^2$ goodness of fit test. 2.Most of the arithmetic mean values for synthetic monthly flows simulated by Gamma distribution are much closer to the results of the observed data than those of two parameter lognomal distribution in the applied watersheds. 3.Fluctuation for the coefficient of variation derived by Gamma distribution was shown in general as better agreement with the results of the observed data than that of two parameter lognormal distribution in the applied watersheds both in Yeong San and Seom Jin river systems. Especially, coefficients of variation calculated by Gamma distribution are seemed to be much closer to those of the observed data during July and August. 4.It can be concluded that synthetic monthly flows simulated by Gamma distribution are seemed to be much closer to the observed data than those by two parameter lognormal distribution in the applied watersheds. 5.It is to be desired that multi-season first order Markov model based on Gamma distribution which is confirmed as a good fitting one in this study would be compared with Harmonic synthetic model as a continuation follows.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.62-69
• /
• 2020

Background Cryolipolysis, a preferred method for minimally invasive body contouring, involves the noninvasive cooling of adipocytes to induce lipolysis without damaging other tissues. This study aimed to evaluate the safety and efficacy of cryolipolysis for the treatment of excessive fat tissue. Methods Between May 2014 and December 2017, 231 patients with 448 areas of interest were enrolled and their records were retrospectively reviewed. We used five different vacuum applicators, and the best-fitting applicator was used for each area. One cycle of cryolipolysis was applied at a cooling intensity factor of 41.6. The efficacy was evaluated 12 weeks after treatment via review of clinical photographs, the pinch test, and ultrasonographic measurements of fat thickness. The occurrence of any complications was also assessed. Results The volume was reduced in all of the areas to which cryolipolysis was applied. The rate of reduction of the fat layer as measured via the pinch test was 19.2%, and the rate of the decrease in fat layer thickness as measured via ultrasonography was 22.8%. Fat reduction of the upper arm differed significantly from that of the abdomen and flank, but no significant difference was found between sexes. The side effects were limited to erythema, edema, bruising, and numbness at the treatment site and resolved without treatment. Conclusions Cryolipolysis, with new and better-fitting applicators, is safe, fast, and effective for the reduction of excessive fat tissue on the abdomen, back, flank, and extremities. It is a good option for treating excess adipose tissue in Asian patients.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.795-805
• /
• 2019

Recently, there is a growing interest in network anomaly detection technology to tackle unknown attacks. For this purpose, diverse studies using data mining, machine learning, and deep learning have been applied to detect network anomalies. In this paper, we evaluate the decision tree to see its feasibility for network anomaly detection on NSL-KDD data set, which is one of the most popular data mining techniques for classification. In order to handle the over-fitting problem of decision tree, we select 13 features from the original 41 features of the data set using chi-square test, and then model the decision tree using TensorFlow and Scik-Learn, yielding 84% and 70% of binary classification accuracies on the KDDTest+ and KDDTest-21 of NSL-KDD test data set. This result shows 3% and 6% improvements compared to the previous 81% and 64% of binary classification accuracies by decision tree technologies, respectively.

• Journal of Fashion Business
• /
• v.17 no.3
• /
• pp.85-98
• /
• 2013

Fabric industry has been developing enough to introduce diverse stretch materials to apparel market, so that tightly fitting leggings designs are taking over not only sports wear but also women's clothing. This study is aimed at developing prototype designs for leggings pants using stretch material that are appropriate for the lower part of body being functional, comfortable, and beautiful. As well, the study is intended to be of a reference in manufacturing such products. Some of the most popular leggings on the market in their kinds and materials were primarily selected to be tested in two ways: wear test and appearance test. Again, the test pants went through the same kinds of two tests, which turned out two designs. Finally, the test pants were treated to yield the most desirable prototype design. In conducting all these tests, some major defects causing discomfort and shortcomings of the leggings pants on the market were exposed and through the wear tests, the drawbacks were seen to be complemented in a big way. Thus, it is hopefully expected that this study will serve as a good reference for developing stretch pants.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.89-97
• /
• 2010

In recent fire protection system, the pipings should be light weighted, seismic proof and wrought with non-welding method. The light weighted stainless steel pipes and fittings, satisfying these requirements, are already used as a fire protection system in Germany, Netherland, Taiwan, Australia, United States and Japan. Accordingly, performance evaluation tests were carried out to determine whether or not the fittings can be used in the pipings. As the performance evaluation tests, we conducted vibration test, water hammering test, bending test and fire test. With the results of the tests, we concluded that the fittings can be used in the fire protection system, and that the life expectancy of the fittings exceeds that of buildings.