• 한국해양공학회지
• /
• 제25권1호
• /
• pp.67-72
• /
• 2011

Offshore structures, such as a platform, a buoy, or a floating vessel, are exposed to several dynamic loads, and viscoelastic damping material is used to reduce the vibration of offshore structures. It is important to know the properties of viscoelastic materials because loss factor and Young's modulus of the viscoelastic damping material are dependent on frequency and temperature. In this study, an advanced technique for obtaining accurate loss factor and Young's modulus of the viscoelastic damping material is introduced based on a multi degree of freedom curve-fitting method and the RKU (Ross-Kerwin-Ungar) equations. The technique is based on a modified experimental procedure from ASTM E 756-04. Loss factor and Young's modulus of the viscoelastic damping material are measured for different temperatures by performing the test in a temperature-controlled vibration measurement room where temperature varies from 5 to 45 degrees Celsius.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.180-186
• /
• 1996

Using carbon steel or ceramic as a shaft material of monolithic and slited insert ring clamped on it. The fitting strengths of the sgrink fitted assemblies measured from room temperature to 30$0^{\circ}C$ and following conclusions were obtained as results of this investigation. 1) The fitting condition under which the shrink fitted assemble was stronger than that using simple fit in high temperature. 2) When both material of the 30mm-diameter shaft and 55mm-diameter boss are SM45C the clamping torque is increased 2.7times as the interference increases 3 times from 20${\mu}{\textrm}{m}$ at the contact length of 6mm monolithic fit. 3) When only the material of boss is changed to STS 304 the clamping torque is increased at the rate of 37.3N.m per 1mm increase of the contact length at the interference of 50${\mu}{\textrm}{m}$ monolithic fit.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제20권4호
• /
• pp.7-16
• /
• 2014

Purpose : The purpose of this study was to examine the nurses' needs for the spatial composition of geriatric hospital. Methods : The survey method was used for collecting the data. The subjects were 110 nurses who worked at 6 geriatric hospitals in Busan. They answered the questionnaire by the self-administered method. The questionnaire consisted of items which asked the spatial composition of patient room, bathroom, dining space, resting space, care-givers' room, and garden. Results : 1) The patient room using a bed on ondol floor would be useful. Also, it would be desirable that most patient rooms consisted of 4 or 6 persons per patient room and the others were 1 or 2 persons per room. 2) The bathroom for only patients and the shower room for their families or care-givers are needed in the geriatric hospital. 3) The dining room for patients in each floor would be useful to old patients. In addition to that, the cafeteria for their families or care-givers are needed. 4) The resting space for patients and their families, for the staff, and for care-givers are needed. 5) The personal locker and refrigerator are necessary fixtures in care-givers' room. Also, table, sofa, sink, and shower booth are also needed. 6) On the base of activities of care-givers, the space for preserving, washing, and heating foods are needed. Also, the storage space for personal items and the fitting space are needed. Implications : The results of this study would be the fundamental data for space planning of the geriatric hospital.

• 한국공간구조학회논문집
• /
• 제11권1호
• /
• pp.67-75
• /
• 2011

본 연구는 컴퓨터 시뮬레이션을 이용하여 대공간에서 스피커 시스템의 변화에 따른 음장의 특성 변화를 검토하였다. 실의 음향특성변화는 실의 흡음력과 동시에 스피커 시스템의 지향성, 설치높이 및 개수를 조절하면서 예측 분석하였다. 연구 결과, 명료도 관련 지표인 D50 및 RASTI는 실의 흡음력 증가의 변화를 효과적으로 나타내는 것으로 분석되었다. 또 초기감쇠시간은 흡음력 증가에 따라 선형적으로 감소하였으나 저 고주파수대역에서는 오히려 증가하거나 변화를 보이지 않았으며, 잔향시간은 전체주파수대역에서 실의 흡음력 증가에 따라 감쇠하였으나 주파수대역별 결과에서는 오히려 증가하거나 비슷한 결과를 보였다. 이는 실의 음향특성이라기 보다는 감쇠구간의 비선형성에 기인한 것으로 판단된다. 스피커 시스템의 적용에 따른 분석결과, D50 및 RASTI는 실의 흡음력 증가에 크게 상관없이 거의 모든 시스템에서 'fair'이상으로 평가되었으며, 스피커의 설치위치가 높을수록 실의 흡음력 증가보다 스피커 지향특성 변화에 더 큰 영향을 받는 것으로 나타났다. 또한 스피커의 설치위치가 낮을수록 실의 잔향시간은 더 짧은 것으로 분석되었다. 시스템의 적용에 따른 잔향시간은 스피커 설치높이가 높을 경우 실의 흡음력 증가에 비례하여 감쇠하는 경향을 보였으나 스피커 설치높이가 낮은 경우 흡음력 증가에 의한 영향보다 시스템의 영향을 받는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.67-73
• /
• 2018

A poled lead zirconate titanate (PZT) cube specimen that is switched by an electric field at room temperature is subject to temperature increase. Changes in polarization and thermal expansion coefficients are measured during temperature rise. The measured data are analyzed to obtain changes in pyroelectric coefficient and strain during temperature change. Empirical formulae are developed using linear or quadratic curve fitting to the data. The nonlinear behavior of the materials during temperature increase is predicted using the developed formulae. It is shown that the calculation results can be compared successfully with the measured values, which proves the accuracy and reliability of the developed formulae for the nonlinear behavior of the materials during temperature changes.

• 산업기술연구
• /
• 제41권1호
• /
• pp.15-20
• /
• 2021

This work proposes a simple method to use the added absorption per person values to predict the expected values of the acoustical conditions in occupied classrooms. This method is based on the effects of the values of added absorption per person on the unoccupied total absorption values of the classrooms and on other room acoustical parameters. The total sound absorption in an unoccupied classroom can be calculated from measured reverberation times in the classroom. The expected occupied absorption can be calculated using equation which was obtained in a previous study (Choi, 2017) by fitting a linear regression line to a plot of total occupied absorption versus the corresponding unoccupied total absorption values measured in 12 university classrooms. The ratios of occupied-to-unoccupied sound absorption are used to predict increments in the values of acoustical parameters that result when occupants are added to the rooms.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.106-111
• /
• 2006

The steel outfitting structures installed in engine room are vibrated by an excitation of the engine and the propeller. Vibration problems such as cracks and fitting breakages are mainly induced at the near range of the resonance. The excitation frequency estimation is possible by engines and propeller specifications, but the natural frequency of a steel outfitting structure is not easily estimated due to the complication and variety of the designed shape. This paper represents natural frequency data of simple steel outfitting structures. As a vibration analysis tool, MSC/NASTRAN was used to calculate natural frequencies. Natural frequencies were compared in case of the shape and boundary condition changes of simple models, and anti-vibration models of the steel outfitting structures were presented on the basis of results.

• 패션비즈니스
• /
• 제19권3호
• /
• pp.101-112
• /
• 2015

Because young men's slacks are becoming more slim-fitting today, this study attempts to identify room for improvement by comparing and analyzing the patterns of men's slacks in the literature and those of manufacturers. Selected for the study are two patterns from the literature and one from manufacturers (Slacks A, B, C); those from studies are slim silhouette pants with no tucking around the waist at the front. Subjects for the Fit tests and the pattern designs were men in their twenties with average body shapes in accordance with the figures in Size Korea 2010. Pants were made from muslin fabric and the Fit tests were carried out with three subjects and a panel of five experts to evaluate comfort and appearance. The analysis of the patterns revealed that Slacks A were the longest followed by C and then B. Slacks C had the most girth ease, and Slacks B were the slimmest in both length and girth. Movement tests showed Slacks A to be the most comfortable followed by B and then C. The appearance test found that Slacks B were the most attractive, followed by A, and then C. The fits at the front, back and sides of all three pants were more or less the same. We suggest that more studies be done on pants patterns adjusting them for proper ease and using elastic fabric in order to maintain the slim fit and also to be comfortable to wear.

• Journal of Astronomy and Space Sciences
• /
• 제30권4호
• /
• pp.307-314
• /
• 2013

Infrared optical systems are operated at low temperature and vacuum (LT-V) condition, whereas the assembly and alignment are performed at room temperature and non-vacuum (RT-NV) condition. The differences in temperature and pressure between assembly/alignment environments and operation environment change the physical characteristics of optical and opto-mechanical parts (e.g., thickness, height, length, curvature, and refractive index), and the resultant optical performance changes accordingly. In this study, using input relay optics (IO), among the components of the Immersion GRating INfrared Spectrograph (IGRINS) which is an infrared spectrograph, a simulation based on the physical information of this optical system and an actual experiment were performed; and optical performances in the RT-NV, RT-V, and LT-V environments were predicted with an accuracy of $0.014{\pm}0.007{\lambda}$ rms WFE, by developing an adaptive fitting line. The developed adaptive fitting line can quantitatively control assembly and alignment processes below ${\lambda}/70$ rms WFE. Therefore, it is expected that the subsequent processes of assembly, alignment, and performance analysis could not be repeated.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.247-251
• /
• 2001

실리콘산화막에 $Si^+$이온을 주입하여 열처리를 한 후 상온에서 8K까지 온도를 변화시키며 PL을 측정하였다. 상온에서 50~80K까지는 PL intensity가 전체적으로 증가하였으며 50K 이하에서는 감소하였다. PL intensity가 증가하는 동안 peaks는 blue-shift가 일어났다. PL spectrum에서 peak를 보이는 파장에서 PL의 온도의존성을 측정하였다. 첫 번째 peak가 온도변화에 가장 민감하며 크기가 작은 peak일수록 온도의 영향을 적게 받는다. PL peak의 온도의존성을 분석하였다. 상온에서 50K 범위에서 PL intensity 대 1000/T그림에서 온도역수의 3차 함수로 fitting할 수 있었다. 온도가 내려갈수록 PL intensity가 증가하는 것을 nanocrystal 보다도 O위주 결함(Si-O-O)이나 Si위주 결함(Si-Si-O)들의 quantum size effect로 설명할 수 있었다.