• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.992-1000
• /
• 2012

This study develops a traditional green fabric pattern design through an apparel CAD system. The method used simulated stage costumes and evaluated the consumer satisfaction connected with a 3D fitting system. The results are as follows. Computerization of the pattern making process can provide higher accuracy and efficiency in apparel pattern making and marking for green fabrics. A Stage costumes design was developed; subsequently, the developed dress patterns are automatically depicted to the input of the body size of the consumer and marked using marking program. This results show that it has an effect on narrow and expensive green fabrics. Stage costumes design can make a simulation by a 3D Fitting system. The results of this study can provide higher consumer satisfaction through a survey of 30 consumers. Stage costumes should attract the sympathy of the spectators. The Acceptance of Andong region's traditional beauty is required. We found that a relationship of performance and clothes, physical functionality and beauty of costumes, possibility of commercialization, and the possible use of a 3D Fitting system use are evaluated. A continuous study of regional culture resources is required since there is a significant possibility for the long-term development of stage clothes.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.40-48
• /
• 2005

A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

• 복식
• /
• 제62권6호
• /
• pp.139-153
• /
• 2012

To prolong the rapid progress of IT, it is necessary to develop contents through IT convergence among the existing goods & service and process areas to create new added-values. In particular, the wedding dress industry has infinite potential in utilizing various contents like virtual fitting by connecting with newly compelling IT areas such as smart phones, Augmented Reality (AR), and application contents. In the meantime, a large scale of the wedding industry has gained global competitiveness due to consulting expertise and the influence of the Korean Wave, whereas most small-sized wedding dress shops in Korea fall short of developing wedding dress designs and receiving relevant information. Accordingly, the purpose of this study was to help brides who have difficulties in choosing a wedding dress by decreasing their time and effort by providing wedding dress designs and information, according their desired image, body type, and circumstances through the utilization of virtual fitting application contents. Not only that, this study aims to diversify and specialize in wedding information and to help users to set a guideline for wedding dresses that are most suitable for them. Moreover, this study has an academic meaning in proposing an interdisciplinary convergence research model through the study of wedding dress design development, AR, and application contents utilization.

• 소성∙가공
• /
• 제24권2호
• /
• pp.121-129
• /
• 2015

A net-shape forming of small and complex-shaped metal parts by metal injection molding (MIM) has economic advantages in mass production, especially for STS 316L valve fitting. STS 316L offers excellent corrosion resistance, but it has poor machinability, which is a limitation in using it for a cost-effective production where both forging and machining are employed. Simulation and experimental analysis were performed to develop a MIM STS 316L 90° elbow fitting minimizing trial and error. A Taguchi method was used to determine which input parameter was the most sensitive to possible defects (e.g. sink mark depth) during the injection molding. The final prototype was successfully built. The results indicate that the simulation tool can be used during the design process to minimize trial and error, but the final adjustment of parameters based on field experience is essential.

• Smart Structures and Systems
• /
• 제17권2호
• /
• pp.231-256
• /
• 2016

This study concerns the derivation of optimum tuning formulas for a passive Tuned Mass Damper (TMD) device, for the case of benchmark ideal excitations acting on a single-degree-of-freedom (SDOF) damped primary structure. The free TMD parameters are tuned first through a non-linear gradient-based optimisation algorithm, for the case of harmonic or white noise excitations, acting either as force on the SDOF primary structure or as base acceleration. The achieved optimum TMD parameters are successively interpolated according to appropriate analytical fitting proposals, by non-linear least squares, in order to produce simple and effective TMD tuning formulas. In particular, two fitting models are presented. The main proposal is composed of a simple polynomial relationship, refined within the fitting process, and constitutes the optimum choice. A second model refers to proper modifications of literature formulas for the case of an undamped primary structure. The results in terms of final (interpolated) optimum TMD parameters and of device effectiveness in reducing the structural dynamic response are finally displayed and discussed in detail, showing the wide and ready-to-use validity of the proposed optimisation procedure and achieved tuning formulas. Several post-tuning trials have been carried out as well on SDOF and MDOF shear-type frame buildings, by confirming the effective benefit provided by the proposed optimum TMD.

• 대한의용생체공학회:의공학회지
• /
• 제42권4호
• /
• pp.159-166
• /
• 2021

In order to analyze cell images, accurate segmentation of each cell is indispensable. However, the reality is that accurate cell image segmentation is not easy due to various noises, dense cells, and inconsistent shape of cells. Therefore, in this paper, we propose an algorithm that combines marker-based watershed segmentation and ellipse fitting method for glioblastoma cell segmentation. In the proposed algorithm, in order to solve the over-segmentation problem of the existing watershed method, the marker-based watershed technique is primarily performed through "seeding using local minima". In addition, as a second process, the concave point search using ellipse fitting for final segmentation based on the connection line between the concave points has been performed. To evaluate the performance of the proposed algorithm, we compared three algorithms with other algorithms along with the calculation of segmentation accuracy, and we applied the algorithm to other cell image data to check the generalization and propose a solution.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.373-378
• /
• 2017

온라인 쇼핑 시장이 성장하는 가운데 소비자의 구매 프로세스는 온 오프라인의 경계 없이 복잡해졌고, 지능적인 맞춤형 서비스를 원하는 스마트 컨슈머가 등장하였다. 변화하는 소비자 및 소비 환경에 따라 각 관련 분야의 기업들은 다양한 옴니채널과 O2O 서비스를 제공하고 있으나 패션업계에서의 대응은 많이 늦은 편이다. 그리고 최근에 사물인터넷 환경도 표준화 기반 오픈 플렛폼으로 변화하고 있으며 사물의 유형에 따른 지능적인 서비스의 다양화가 요구되고 있다. 본 논문 에서는 패션업계에 적합한 스마트 피팅 디스플레이를 활용한 패션 O2O 시스템을 제안한다. 제안하는 시스템은 오프라인 매장에서 사용자가 수행한 피팅에 관한 정보를 데이터베이스화하여 사용자에게 제공하며 오프라인에서 수행한 사용자의 활동들을 온라인에서도 지원함으로써, 사용자의 구매활동을 지속적으로 유지, 관리할 수 있도록 한다. 아울러, 매장관리시스템 및 배송시스템의 정보 연계를 통해 고객 중심의 지능적인 피팅 서비스가 가능할 것으로 기대한다.

• 정보처리학회논문지B
• /
• 제13B권5호
• /
• pp.525-532
• /
• 2006

아이징(Ising)모델화 된 이진 탁본영상을 유연한 선부합 ICM(Iterated conditional modes) 방식으로 영상복원하는 새로운 기법을 제시한다. 기본적으로 탁본영상은 획 구성상 정보 영역과 배경 영역의 두 극단으로 나누어져야 한다. 종래의 ICM적 접근이 부분적 사각구도(四角構圖)의 점처리에 근거하였음에 비해 본 연구의 주된 아이디어는 선처리이다. 기하학적 구조를 구하기 위해 현재고려중인 화소의 배열 위치를 중심으로 다수의 선형부합함수들을 발생시킨다. 부합함수들의 경사도와 크기들의 집합에 베이즈적 판별 논리를 적용하여 현재고려중인 화소의 영역을 판단한다. 영역판별 결과는 이진 색도이다. 이 경우 매 단계별 영역귀속 판단은 영역 안과 밖에서의 차별된 추적 양상에 관한 확률적 반복성에 의존한다. 마지막으로 시뮬레이션을 통해 이진 탁본영상에 대하여 본 알고리즘의 효과를 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제24권5호
• /
• pp.93-102
• /
• 2019

The nation's fraternity and elite players who have built up a global bicycle infrastructure often find it to be a problem with the bicycle's speed and speed reduction, pain in knees and hip joints, or even with the bike itself, or with the bike's own physical defects or a riding posture. However, we found that most cases of cleat adjustment errors were likely to be true. Accurate adjustment of the cleats is the most important of the entire fitting process and can be the basis for improving the ability of the bicycle rider and preventing injury. Therefore, the study was intended to give a prior study of bicycle fitting, which can improve bicycle efficiency and prevent injury when riding bicycle, and specific ways of adjusting bicycle shoe cleats, and the following results were obtained. First, the cleat characteristics of Shimano, LOOK and Speedplay, which are currently used in public, and the characteristics during the cleat adjustment process, were derived. In addition, the structure and characteristics of dedicated shoes using cleats and the method of using pedalling by the structure of shoes after adjusting the cleats were derived. Second, the position of the shoe and its relationship with torque in pedalling was discussed, and the method of adjusting front and back of cleats was derived. Third, leg length, ASIS, Q-Angle and Q-factor etc. were analyzed and the method of setting and adjusting cleat left and right values were derived. Fourth, the relationship between walking angle and cleat rotation was analyzed, the method was derived, and the torque size and angle behind the cleat adjustment were compared and analyzed using the spinner to indicate the torque and the effective mean torque angle after the cleat adjustment.

• 한국가스학회지
• /
• 제27권2호
• /
• pp.79-85
• /
• 2023

최근 반도체 공정은 대기업을 중심으로 4차산업에 따른 수요 증가로 메모리 반도체에서 파운드리로의 공정변화를 모색하고 있으며 10나노(nm) 공정에서 3 나노(nm)이하 공정으로의 초미세화 공정개발과 같이 산업이 확대되고 있다. 이러한 반도체 칩을 생산하기 위해 사용되는 원료인 특수가스 및 Precursor(전구체) 등의 특성은 유독성, 자연발화성, 인화성, 부식성 물질이다. 이러한 반도체 원료들은 폐쇄시스템으로 운영이 되어 정상 중에는 누출이 되지 않으나 누출 될 경우 가스박스 내부로 확산되고 가스박스 내부에서 적절한 환기가 되지 않는 경우 가스박스 외부로 확산되어 화재, 폭발을 일으키거나 독성 물질의 누출 등 큰 사고로 이어질 수 있다. 최근 반도체 산업에서 원료가 폐쇄시스템으로부터 누출되어 가스박스 내부 및 외부로 확산되는 사고 사례가 발생하고 있으나 가스박스 내부의 적정환기 시스템의 적용 이외에 적절한 예방대책을 제시한 연구 사례를 찾아 볼 수 없었다. 본 연구에서는 반도체 원료 이송배관의 연결부위인 VCR 피팅에서 원료가 누출되어 가스박스 외부로 확산된 사고사례를 바탕으로 이에 대한 예방대책을 제시하고자 한다.