• Journal of Environmental Impact Assessment
• /
• v.26 no.3
• /
• pp.181-194
• /
• 2017

While over 90 percent of fishways are made up with concrete material, nature-like fishways are started to be established as a form of small stream using natural materials. Recently, the central government in collaboration with a university has proposed a 'Standard Model of Nature-like Fishway' with a purpose to provide as a national design standard of nature-like fishway. This study aims to criticize the proposed design model of nature-like fishway and to propose improvements by examining other international cases. As a result, we found problems and limitations of the proposed design model due to the lack of research and experience about making nature-like fishway in Korea. Especially, for designing bypass nature-like fishway we found the lack of studies about structure management strategies, establishment of rocks or pebbles inside the stream, and natural materials. In this sense, more studies about nature-like fishway design adaptable to our environment need to be conducted. In addition, since the proposed design standard for nature-like fishway has been created based on the limited examination of existing domestic cases, it is desirable to improve the design standard on the basis of hydrological and biological research so that they could be adapted effectively to regional and local contexts.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.4
• /
• pp.61-79
• /
• 2016

This study aims at examining the structural and managemental problems of the existing fishways which affect the migrations of fishes, and at suggesting alternatives to improve the fishways' efficiency. The study focuses on the fishways constructed in the diversion weirs in the lower reaches of 41 rivers(2 national rivers and 39 rural rivers) in the eastern coast of Korea. Most of water-using facilities in Korean rivers are diversion weirs, and fishways are established as subsidiary facilities of most of the weirs. Among the 58 or so fishways examined in this study, only a few are doing their proper function, and most of them need improvement. This study aims at strengthening those fishways function and increasing their economic efficiency and migration efficiency. Based on the results of this study, the followings are suggested. In case the fishway sticks out downstream from the apron, a subsidiary fishway diverging from the main is suggested to attract fish. The entrance to the subsidiary should head below the raised part of the apron and a pool should be constructed in the connecting part with the main. To attract fish and let the upstream migrators rest for a while, an entrance pool should be constructed in the fishway. Most of the examined fishways have low side walls, which allow the upstreamers to jump out of the fishway. Those side walls are suggested to be raised above the jumping height of target fishes. The exit parts of most fishways are too shallow, or have no grass to protect the fish from the birds. Protective facilities are suggested to keep the birds from entering the fishway. By the time Ice-harbor type and Vertical-slot type fishways are scientifically proved to be defective, the fishway should not diverge from the standard design.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.308-319
• /
• 2020

In this study, the field applicability of the recently constructed multifunctional fishway in Seomunbo, Yeongcheon-si, and Gyeongsangbuk-do were examined. The analysis variables were R/C slab (S1) and R/C+S/C slab (S2), the underground passage standard areas (width × length) were 1.4 m × 0.2 m, 1.4 m × 0.3 m, and 1.4 m × 0.6 m, and the flow velocities were 0.8, 1.2, and 1.6 m/s. As a result of the analysis, the safety of the design of Seomunbo was evaluated. The analysis showed compared to the Seomoon Weir fishway, the maximum stress of S2 decreased by 24 - 32%, the bending moment of the underground passage decreased by 16 - 33%, the maximum stress of the sidewall decreased by 20 - 36%. In addition, the bending moment of the upper slab decreased by 17 - 33%, the maximum stress of the upper slab decreased by 9 - 28%, and the bending moment decreased by 19 - 33%. Complementation was required in the following percentages: 18% and 14% for the maximum stress and bending moment of the underground passage, respectively, 15% and 17% for the maximum sidewall stress and bending moment, respectively, and 11% and 16% for the upper slab maximum stress and bending moment, respectively. The results showed that S2 was superior to that of the Seomoon Weir fishway, and the underground passage size of 1.4 m × 0.3 m was superior to those of 1.4 m × 0.2 m and 1.4 m × 0.6 m, and R/C+S/C slab was superior to that of R/C slab. The findings are expected to be useful for constructing and designing the multifunctional fishway.