• 해양환경안전학회지
• /
• 제21권1호
• /
• pp.57-63
• /
• 2015

외국인 선원은 1990년대 선원 수급이 어려웠던 어선에 산업연수생으로 승선하기 시작하여 2013년말 현재 상선 및 어선에 총 21,327명이 승선하고 있다. 특히 원양어선 및 연근해어선의 경우에는 최근 5년간 어선 척수가 감소하고 있음에도 불구하고 외국인 선원의 수는 거의 2배 증가하였다. 최근 어선 해양사고를 살펴보면, 어선에 다국적의 선원이 승선한 후 선원 상호간의 의사소통이 어려워진 것이 주요 문제가 되었다. 그리고 외국인 선원이 이해할 수 있는 안전수칙 등이 제공되지 아니하고 교육 훈련이 제대로 이루어지지 않고 있다. 그 결과 어선은 조업 중 해양사고의 발생 위험이 높아졌고, 비상상황에서 선장의 통제 하에 적절한 비상대응이 이루어지지 않았다. 또한 한국인 선원의 외국인 선원에 대한 폭언 및 구타로 인한 몇 건의 노동문제가 발생했다. 따라서 본 논문은 먼저 외국인 선원이 승선한 어선에서 발생한 해양사고 사례와 어선원의 고용 및 교육문제에 대해 살펴보고, 해양사고 예방을 위하여 외국인 선원에 대한 안전수칙교육과 정기적인 비상대비 교육 훈련의 필요성을 제시하고자 한다.

• 수산해양교육연구
• /
• 제27권3호
• /
• pp.821-832
• /
• 2015

The aims of this study are to estimate the optimal vessel reduction scales and these direct economic effects of coastal and offshore fisheries in the Republic of Korea. To estimate respectively optimal fishing efforts of individual fishery by species in coastal and offshore fisheries, we adopted appropriate fishing power of each species published by National Fisheries Research and Development Institute and also considered biological and socio-economic factors such as the bycatch rate, the profit rate, the efficiency of resource use, the average age of fishing vessel, the intention of vessel reduction, and the annual changes in vessels by other factors. The direct economic effects of the optimal vessel reduction in coastal and offshore fisheries based on maximum sustainable yield and 2/3 maximum sustainable yield was calculated by a cost-benefit analysis. This study showed that optimal reduction numbers of vessels engaged in coastal and offshore fisheries were 4,431 and 374 vessels and the direct economic effects in coastal and offshore fisheries were about 371.7 and 569.4 billion won and these NPV and BCR were 111.7 billion won and 1.65 and 342.6 billion won and 4.97 respectively.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.495-503
• /
• 2019

Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.185-185
• /
• 2017

• 수산해양기술연구
• /
• 제55권2호
• /
• pp.152-161
• /
• 2019

This research carried out a study on the job characteristics of the skipper of the coastal composite fishing vessels in order to find a way to prevent the ship collision caused by the highest human error among the marine casualty of fishing boats. Video observation was used as the research method in which six CCD cameras were installed on the vessel to collect image data and data extracted from the image were analyzed to derive the results of the functional activity of skipper according to the fishing operation process of experimental fishing vessel. The results are as follows. The working process of the experimental fishing vessel consisted of navigation for fishing ground, setting line, waiting for hauling line, hauling line and navigation to homeport. In these processes, the skipper was performing watchkeeping in the wheelhouse in which he carried out a single task, a dual task that performed two tasks simultaneously, and a triple task that performed two or more tasks simultaneously. In addition, one of the risk factors causing the collision was a no watchkeeping in the wheelhouse for navigating for fishing ground, waiting for hauling line, and hauling line at 25.4%, 64.6% and 0.3%, respectively among the marine casualty while drowsiness caused 1.2% of the marine casualty in navigating for fishing ground. Concurrent tasks that simultaneously perform two or more tasks that can overlook any other important duties while carrying out watchkeeping in the wheelhouse include 51.3% of navigation for fishing ground, 81.9% of setting line, 19.0% of waiting for hauling line, 87.9% of hauling, and 88.7% of navigation to homeport. The above concurrent tasks yielded an average of 66.1%. Experimental fishing vessels are required to focus on ship handling operations related to fishery operations, and the skipper is assigned more activities and attention to fishery related tasks. Therefore, it is considered desirable to build a collision prevention system that is appropriate to the characteristics of the skipper's work, escaping from transferring the responsibility of ship collision to the skipper completely.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.623-632
• /
• 2014

In this study, the stability of fishing vessels get some change in accordance with the installation of LED luring lamp in comparison with metal halide luring lamp were investigated. Inclining test for 9.77 ton class of squid jigging and hair-tail angling vessel was performed in order to make a stability evaluation. A performance analysis of the target vessels to the stability on the basis of KST-SHIP program was evaluated. The results were as follows in this study. The stability of the fishing vessel by a metal halide such as LED and the like according to the result obtained by the inclining test is a slightly present difference, and the stability is not affected. The fishing vessel with LED lamp installed satisfies all the stability criteria specified in law and IMO rule. Compared to the metal halide LED lamp the increase of the height of the center of gravity and the initial transverse metacenter was caused. Due to the LED installation, the somewhat wider wind area of the waterline, which appears as a result, does not lead to an actual increase in rolling period. But then it is necessary to be designed on that the LED lamp shape reduces wind pressure area. Because of LED lamp installation, the GM value of vessels is increasing faster rolling cycle so causes a decrease in the sense that the crew is aboard.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권2호
• /
• pp.73-80
• /
• 2011

어선용 고효율 표준 프로펠러 개발에 대해 고찰해 보았다. 어선용 프로펠러의 경우 모형시험이나 이론해석을 통한 정도 높은 설계가 이루어지지 않고 시리즈 데이터(주로 MAU 시리즈)에 의존하여 초기설계 수준에 머무르고 있는 실정이다. 본 연구에서는 52톤 어선을 기준으로 개발되었으며 기존 MAU 형 프로펠러보다 성능이 우수한 프로펠러를 손쉽게 설계, 적용할 수 있는 NACA형 단면을 사용한 시리즈 프로펠러 자료를 제공하기위한 연구를 수행하였다. 또 한 기존의 복잡한 설계 방식 대신에, NACA형 프로펠러를 표준화하여 보다 편리하게 사용할 수 있도록 하였다. 향후 모형 시험을 통한 추진 성능 및 캐비테이션 성능 검증을 수행할 계획이다.

• 한국수산과학회지
• /
• 제36권6호
• /
• pp.743-748
• /
• 2003

An oil boom was set up in order to contain diffused oil from spills and for the retrenchment of damage caused by oil Pollution. Therefore, the oil boom anchor needed proper holding power to endure high resistance from flowing streams and to secure the oil boom around the spill, and must dredge directly into the seabed when it is dropped and block oil outflow immediately. This study investigated the holding power of the danforth anchor and the coastal fishing vessel anchor used for oil booms in the KMPRC (Korea Marine Pollution Response Corporation). For each type, a 30 kg and 20 kg anchor were used. The holding power of the danforth anchors were measured by dropping both weights 10 times. However the coastal fishing vessel anchors were dropped only 5 times each, because no substantial differences were found between drops. In the results of the danforth anchors, an anchor awoke occurred in 2 drops of the 30 kg anchor and in 4 drops of the 20 kg anchor, wherein there was no holding power to be measured. With exception to the anchor awoke cases, the maximum holding power of the danforth 30 kg and 20 kg anchors was 250-520 kg and 123-233 kg, respectively. In the case of the coastal fishing vessel anchors of 30 kg and 20 kg, throughout the experiment, there was no occurrence of an anchor awoke. For the 30 kg and 20 kg anchors, the maximum holding power was measured to be 209-230 kg and 155-170 kg, respectively. Therefore, the holding power of the coastal fishing vessel anchor was shown to be much poorer than that of the danforth anchor. However, the holding power of the danforth anchor was very unstable. Due to the occurrences of anchor awoke, there was no holding power and the measurement value of maximum holding power showed too much variation among the drop tests. Also, after the maximum holding power was achieved, anchor awoke occurred easily. In the case of the coastal fishing vessel anchor was much more stabile, because there was no anchor awoke and no instance where holding power failed. Also the maximum holding power was reached quickly and almost no variation occurred among the drop tests.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.363-371
• /
• 2019

Thousands of demersal fishes inhabit in the waters around Korea and most of them are overexploited. One of reasons is technological development, which increases the efficiency of the vessels continuously. The analysis was conducted to identify the change of fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the Danish seine fishery from 1960s to 2010s. Gross tonnage was decreased stably, but the horse power was increased annually. The length of ground rope, warp and hand rope was somewhat longer, but changed a little. Color fish finder was utilized from the mid-1960s and positioning system was used five years later. A hydraulic line hauler were introduced in the mid-1980s, and supply rate was gradually increased. Surveys on the supply and upgrading of fishing equipment utilized visiting researchers. Therefore, the relative fishing power index in the Danish seine fishery increased stably from 1.0 in 1970 to 1.0 in 1980, to 1.2 in 1990, to 1.3 in 2000 and to 1.3 in 2010. The results are expected to contribute to reasonable fisheries stock management.

• 수산해양기술연구
• /
• 제49권1호
• /
• pp.40-50
• /
• 2013

This study is aimed to find a control factor for the marine casualty of fishing vessel by using the risk quantitative method of marine casualty, and sequentially timed event analysis for the reason finding. The result is that collision, sinking, and capsizing took high risk need to be strongly controlled. And the accident reason and control factors distinguished are as follows. The 82.2% of collided fishing vessels have negligence of look out as a immediate cause, while it was judged that underlying causes were the characteristics of vessels and fishing method, lack of suitable complement, fatigue, the prejudice or ignorance on steering and sailing rules. So the control factors are; firstly needs educational control measures and in terms of systemic control approach expand the range of the certificate of competency more smaller tonnage.