• Title/Summary/Keyword: first window

Search Result 659, Processing Time 0.056 seconds

The Signal Acquisition Algorithm for Ultra Wide-band Communication Systems (UWB 통신시스템에서 동기 획득 알고리즘)

  • Park, Dae-Heon;Kang, Beom-Jin;Park, Jang-Woo;Cho, Sung-Eon
    • Journal of Advanced Navigation Technology
    • /
    • v.12 no.2
    • /
    • pp.146-153
    • /
    • 2008
  • Due to the extremely short pulse in the Ultra-Wideband (UWB) technology, the accurate synchronization acquisition method is very important for both high data-rate WPAN and low data-rate WPAN. In this paper, we propose the synchronization acquisition algorithm based on two-step signal search method to acquire the synchronization in the UWB multi-path channel. At the first step, the search window is divided by two and the window that has higher power is chosen as a next search window. This operation is repeated until the measure power of the search window is smaller than the threshold value. At the second step, we employ Linear Search algorithm to the search window obtained at the first step for fine search. The proposed algorithm is proved that the synchronization acquisition is faster than the parallel search algorithm and it shows good performance in environment of the SNR extreme changes by the simulation.

  • PDF

A comparative analysis of the total window thermal transmittance simulation result according to the evaluation method of effective conductivity(λeff) of frame cavity - Focused on unventilated frame cavity simulation results of single window - (창틀 공기층의 유효 열전도율(λeff) 산정방법 차이가 창 전체 열관류율(Uw) 시뮬레이션 결과에 미치는 영향에 대한 비교 분석 - 단창 창틀의 비환기 공기층에 대한 시뮬레이션을 중심으로 -)

  • Lee, Yong-jun;Oh, Eun-joo;Kim, Sa-kyum;Choi, Gyeong-seok;Kang, Jae-sik
    • KIEAE Journal
    • /
    • v.16 no.2
    • /
    • pp.79-85
    • /
    • 2016
  • Purpose: It is difficult to calculate frame U-value because of the two reason. First is selection of air properties in cavity. Second is calculation method in window frame. For this reason, it is important to decide cavity properties in window frame. However, international standards offered different method(ISO 15099, ISO 10077) and air properties was changed according to the two methods. The aim of this study was to suggest method for deriving accurate frame U-value using international standard methods and CFD simulation. Method: First, this study conducted analysis calculation method of ISO 15099 and ISO 10077. And, CFD simulation conducted based on same condition. Finally, ISO calculation and CFD simulation results were verified through comparison with real experiment results. Result: The results show that effective conductivity of ISO 15099 was the highest value. ISO 10077 and CFD result followed. The convergent values of ISO 10077 was the highest. ISO 15099 and CFD followed. ISO calculation reflecting CFD simulation results will reduce error with experimental results.

An Analysis and Suggestion for Chinese Single Window based on Korean Single Window (한국의 싱글 윈도우 모범 사례를 통해서 본 중국 싱글윈도우의 실태 분석과 제언)

  • Han, Min-Chung;Ahn, Byung-Soo
    • International Commerce and Information Review
    • /
    • v.13 no.2
    • /
    • pp.27-48
    • /
    • 2011
  • Single window has become a critical point of trade facilitation. While Korea has set up the first web based single window 'uTtradeHub', China has also been working on a seamless single window. As strong governmental support, advanced technology, leading agency and legal framework are success factors for single window, China already has solid foundation for this. For the leading agency, this research suggests the CIECC as a leading agency with linkage to E-Port service for seamless trade service for companies. We expect that Chinese single window will materialize in near future by a leading agency with the help of strong governmental support.

  • PDF

Production of Window Motor Assembly Parts in Automotive Body (자동차 전장에서 윈도우 모터 조립 부품의 생산)

  • Lee, Jeong-Ick
    • Journal of the Korea Convergence Society
    • /
    • v.3 no.4
    • /
    • pp.29-34
    • /
    • 2012
  • Power window motor assembly including ECU system is important to doors of automobile. This study is done for own development instead of importing of power window motor assembly. This paper is written under five specific subjects. The first, making of prototype sample and analysis of mass-production problem using CAE, the second, design of mass-production mold(2D and 3D), the third, manufacturing of sample mold, the fourth, tryout and measuring of 3 dimensions, the fifth, data analysis and mold modify. In the among them, product sample and analysis of mass-production using CAE, design and manufacture of mass-production mold, and production of sample mold are successfully done. In the results, it is made clear that two cavity and one gate are proper to make a mold of power window motor assembly housing. Besides, it is acquired own technology for mass-production of power window motor.

Video Quality Assessment based on Deep Neural Network

  • Zhiming Shi
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.17 no.8
    • /
    • pp.2053-2067
    • /
    • 2023
  • This paper proposes two video quality assessment methods based on deep neural network. (i)The first method uses the IQF-CNN (convolution neural network based on image quality features) to build image quality assessment method. The LIVE image database is used to test this method, the experiment show that it is effective. Therefore, this method is extended to the video quality assessment. At first every image frame of video is predicted, next the relationship between different image frames are analyzed by the hysteresis function and different window function to improve the accuracy of video quality assessment. (ii)The second method proposes a video quality assessment method based on convolution neural network (CNN) and gated circular unit network (GRU). First, the spatial features of video frames are extracted using CNN network, next the temporal features of the video frame using GRU network. Finally the extracted temporal and spatial features are analyzed by full connection layer of CNN network to obtain the video quality assessment score. All the above proposed methods are verified on the video databases, and compared with other methods.

Characteristics of Kineticism in contemporary fashion window display (현대 패션 윈도우 디스플레이에 나타난 키네티시즘 움직임 특성)

  • Jeong, Yerang;Lee, Younhee;Yoon, Jung-A
    • The Research Journal of the Costume Culture
    • /
    • v.26 no.3
    • /
    • pp.327-345
    • /
    • 2018
  • This study analyzes characteristics related to Kineticism found in different kinds of displays and arts in order to contemplate modern window displays. The standard of analysis is based on kinetic arts pioneer George Rickey's six display factors. Projection features and movements were categorized into "Direct movements," "Indirect movements," and "Relative movements." Results were obtained through analysis of different examples of each category. First, the most observed form of Kineticism was direct movements on the window display. Along with the development of science and techniques, a variety of divergent motional methods has arisen. After that followed indirect movement, which uses visual media and lights for presentation. The third was relative movements, which provides communication in practical experience; users' motion is used to provide modification in vision. Fourth, we observed that direct movements and indirect movements can express fluidity depending on materials, inducing a sense of tension within the window display through visual stimuli together with dynamism from mechanical exposure. Fifth, when direct movements pair with relative movements, it triggers customer participation; though it does not deliberately induce participation, the effects are beyond expectation. Sixth, if indirect movements meet relative movements, the motion of lights offers a major stimulation to the customers along with various expressions, thus achieving an interactive domain.

The Research on Actual State of Window Display of Department Stores -Daeieon Area- (백화점 쇼윈도우 디스플레이에 관한 실태조사 -대전 지역을 중심으로-)

  • 이서희;최나영
    • The Research Journal of the Costume Culture
    • /
    • v.10 no.5
    • /
    • pp.473-484
    • /
    • 2002
  • The purpose of this study is to analyze the window display in the department stores in Daejeon. The framework of execution, colors, illumination, and kinds and colon of mannequins of the window display in four department stores in Daejeon were analyzed based on the photographs of displays from January to October in 2001. The results were as follows: First, in the framework of execution, each department store used mostly the triangle-framework during four seasons, which was a fundamental framework. Its characteristics were a sense of security, three-dimensional effect, and balance. It was the most suitable framework fur the mannequins and toruso. Second, a color scheme for commodities was all no-coloring scheme in each four seasons. The color of background was mostly white which harmonized well with the colors of commodities and lights. The plan for the color scheme of window display should always executed on the commodities, and the colors should be harmonized to produce the best display effect. Moreover, when commodities had two colors, the color of background should be in one simple color that manifest the commodities, or that is secondary color to the main color of commodities. Third, all department stores used all same illumination. Lack of illumination, management, and expense incured ineffective production of the display. Fourth, mostly, real mannequins with white or skin colors were used, and the toruso was next used in department stores. The set was limited because many companies had not made new sets for the display. Therefore, new sets including mannequins should be actively developed to produce effective display.

  • PDF

A comparative analysis of the simulation results of total window thermal transmittance(Uw) according to the evaluation method - Focused on comparison of the single window simulation results - (창세트 전체 열관류율(Uw) 평가 방법에 따른 시뮬레이션 결과 비교 분석 - 단창 창세트에 대한 시뮬레이션 결과 비교를 중심으로 -)

  • Lee, Yong-jun;Oh, Eun-joo;Kim, Sa-kyum;Choi, Hyun-jung;Kim, Yu-min
    • KIEAE Journal
    • /
    • v.16 no.3
    • /
    • pp.77-82
    • /
    • 2016
  • Purpose: The aim of this study is to calculate U-factor of the window using international standard methods and compare quantitative and tendency difference focused on ISO standard 15099 and ISO standard 10077. And the result of ISO standard calculation methods is verified using thermal performance experiment to evaluate applicability of domestic certification system. This study is utilized a basis for activation of domestic window certification system. Method: First, 16 cases are selected that is combined a variety of frame, Glazing, spacer, etc. The selected cases were simulated using WINDOW&THERM based on ISO 15099 and 10077 calculation method. Second, experiment was conducted based on Korean standard condition. Then, it was compared the error of experiment and simulation results. Through this process, ISO 15099 and 10077 calculation methods were evaluated accuracy and utilization. Result: The results show that the difference of ISO 15099 and ISO 10077-2 is maximum 5.4%. The results of comparing U-factor errors based on the Korea standard experiment test found 2.4%. Consequently, it will be possible to combination calculation methods of ISO 15099 and ISO 10077 for a single window.

Unexpectedness in Christmas season window displays (크리스마스 시즌 윈도우 디스플레이에 나타난 의외성)

  • Kim, Bora;Yoon, Jung-A;Lee, Younhee
    • The Research Journal of the Costume Culture
    • /
    • v.25 no.5
    • /
    • pp.577-592
    • /
    • 2017
  • The purpose of this study was to propose various directions for effectively proposing window displays that satisfy changing consumer needs by investigating and analyzing the characteristics of unexpected expressions used in recent Christmas windows. Research was conducted by investigating unexpectedness in window displays through literature reviews and previous studies. To observe unexpectedness in Christmas windows, website-based case images of window displays from the six years between 2010 and 2015 were collected from the department stores of Bergdorf Goodman, Printemps, Selfridges, and Isetan. Unexpected expressions in department-store Christmas window displays could be categorized into four expressive methods of hybrid expressions, figurative expressions, amusing expressions, and exaggerative expressions. The results were as follows: First, hybrid expressions are interpreted by consumers as having new or diverse meanings that change the original external forms of subjects or objects. Second, Christmas colors are used in the window backgrounds' figurative expressions, but these windows do not use excessive expressions; furthermore, these windows personify people as animals and anthropomorphize animals as people, using subjects to depict other subjects to show unfamiliar images. Third, amusing expressions are used to decorate windows with unique and novel ideas that provide stimulation and amusement for customers and capture their attention through the composition of windows that entail childish props and elements that create funny. Fourth, exaggerative expressions deliberately stretch and expand subjects or objects in windows to elicit customers' curiosity and interest through emphasis.

Comparison of Insect Diversity in Relation to the Sampling Method, Time And Window (채집 방법과 시기 및 빈도에 따른 곤충의 다양성 비교)

  • Park, Geun-Ho;Cho, Soo-Won
    • Korean journal of applied entomology
    • /
    • v.46 no.3
    • /
    • pp.375-383
    • /
    • 2007
  • To find out the affection of the sampling techniques to the result of a faunistic study, we surveyed the insect fauna of the Chungbuk National University (four different sites) for a year, from spring to fall. For each site, four different collecting methods: light trap, net sweeping, pitfall trap, and window trap, were applied and the collecting was done every other week for a total of 16 times. A total of 14 orders and 672 species were collected. 501 species were collected by the light trap, which covers about 75% of the total number of species, turn out to be the most effective, while other methods could only cover 18% or less. On average, only about 30% of the species collected at a given time of collecting were re-collected at the next collecting, which means about 70% of the species collected from the first collecting remains not collected in the next collecting if you collect insects every other week. The result suggests that, in addition to applying diverse collecting methods, frequent sampling, or narrow sample window, is another very important factor for a good representation of species diversity in an insect faunistic study.