• 한국화재소방학회논문지
• /
• 제30권4호
• /
• pp.128-134
• /
• 2016

구급서비스의 소요 시간, 특히 반응시간은 생존 확률을 향상시키고 후유 장해를 감소시킬 수 있다는 점에서 구급서비스의 품질 관리를 위한 중요한 지표로 활용되고 있다. 이에 본 연구에서는 2011년부터 2014년까지 4년 동안 ${\bigcirc}{\bigcirc}$시의 신고 접수, 출동, 구급활동 자료를 이용해 환자 특성, 주증상 등을 고려한 구급서비스의 시간(time interval)을 분석하였다. 구급서비스의 시간에 대한 정의를 세분화하고 각각의 소요 시간에 미치는 다양한 경제사회적 요인이나 지역적 특성을 분석하여 효율적으로 관리할 수 있다면 구급서비스의 품질은 크게 제고될 것으로 기대 된다.

• 원예과학기술지
• /
• 제30권3호
• /
• pp.236-242
• /
• 2012

We investigated the influences of night interruption (NI) and night temperature on flowering and flower coloration in Cymbidium. Cymbidium 'Red Fire' and 'Yokihi' were grown under a 9 hours photoperiod (control), a 9 hours photoperiod with NI at a low light intensity (LNI) of 3-7 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, or a 9 hours photoperiod with NI at a high light intensity (HNI) of 120 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for four hours (22:00-02:00 HR) for 16 weeks during the reproductive growth stage (Experiment 1). Thirty month-old Cymbidium 'Red Fire' plants with initiated flowering buds were placed in four different growth chamber with night temperature set points of 6, 9, 12, or $15^{\circ}C$ for 16 hours (18:00 to 09:00 HR) and a daytime temperature of $25^{\circ}C$ (Experiment 2). In Experiment 1, the numbers of visible buds and flowers increased, and time to flowering decreased in both the LNI and HNI treatments, as compared to the control in both cultivars. Red color in Cymbidium 'Red Fire' increased by both LNI and HNI, as evidenced by an increased $a^*$ in plants grown under these conditions, relative to those grown under the control condition. Number of days to visible buds at 9-$15^{\circ}C$ ranged from 31-34 days, as compared to 39 days at $6^{\circ}C$ in Experiment 2. Although as the temperature increased days to flowering decreased when the plant was grown at $15^{\circ}C$ as compared to 6, 9, or $12^{\circ}C$, the red color ($a^*$) also decreased. The number of flowers and percent flowering increased when the night temperature was maintained higher than $9^{\circ}C$. Therefore, NI treatment and maintaining the night temperature at approximately 9-$12^{\circ}C$ during the winter season after flower spike initiation in the reproductive developmental growth stage improve flower quality and controls flowering time.

• 한국전자통신학회논문지
• /
• 제13권5호
• /
• pp.1017-1022
• /
• 2018

본 논문에서는 주택 내의 단독 화재경보기들이 무선통신을 통해 상호 화재 정보를 공유함으로서 심야 시간대의 화재 인지력 저하 문제, 방 간 격벽으로 인한 경보 신호 감쇄 문제를 해소할 수 있는 무선 감응식 주택 단독 화재경보기를 개발하였다. 무선 감응식 화재경보기는 온도 센서와 가스 센서를 기반으로 온도와 $CO_2$ 농도를 감시, 주택의 화재를 감지하고 무선 송수신 모듈 등을 이용하여 다른 방의 단독 무선 경보기들에게 화재 경보를 전송함으로서 신속하고 정확한 화재인지가 가능하도록 설계되었다. 아두이노를 주제어장치로 하는 3개의 무선 감응식 단독화재 경보기의 시작품들이 제작되었으며, 온도 및 가스 시험에서 정확하게 동작함으로서 그 유용성을 확인하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.1-7
• /
• 2020

The secure access the lighting, Heating, ventilation, and air conditioning (HVAC), fire safety, and security control boxes of building facilities is the primary objective of future smart buildings. This paper proposes an authorized user access to the electrical, lighting, fire safety, and security control boxes in the smart building, by using color grid coded optical camera communication (OCC) with face recognition Technologies. The existing CCTV subsystem can be used as the face recognition security subsystem for the proposed approach. At the same time a smart device attached camera can used as an OCC receiver of color grid code for user access authentication data sent by the control boxes to proceed authorization. This proposed approach allows increasing an authorization control reliability and highly secured authentication on accessing building facility infrastructure. The result of color grid code sequence received by the unauthorized person and his face identification allows getting good results in security and gaining effectiveness of accessing building facility infrastructure. The proposed concept uses the encoded user access authentication information through control box monitor and the smart device application which detect and decode the color grid coded informations combinations and then send user through the smart building network to building management system for authentication verification in combination with the facial features that gives a high protection level. The proposed concept is implemented on testbed model and experiment results verified for the secured user authentication in real-time.

• 원예과학기술지
• /
• 제35권4호
• /
• pp.418-430
• /
• 2017

The objective of this study was to understand the combined effect of shading treatment and harvest time on pungency, ascorbic acid content, market-quality pepper yield, and photosynthetic activity in a yellow 'Star Flame' and 'Fire Flame' F1 hybrid pepper cultivar (Capsicum annuum). Plants were cultivated in a greenhouse under white, red, and green shading nets and compared to those grown under unshaded control conditions. The ascorbic acid and pungency parameters were analyzed by high-performance liquid chromatographic methods. Ascorbic acid, a compound of high nutritive value in pepper, was highest in fruits gathered during the first summer harvest in both hybrids. The ascorbic acid content was found to be further increased in fruits from plants grown under white net shading in both 'Star Flame' and 'Fire Flame'. Total capsaicinoid contents in 'Star Flame' were influenced by the interaction of shading treatment and harvest time (p = 0.004), with the lowest amounts ($241.2-251.5mg{\cdot}kg^{-1}$ fresh weight) resulting from white and red shading treatments at the early autumn harvest. In 'Fire Flame', both shading treatment (p = 0.009) and harvest time (p < 0.001) affected total capsaicinoid contents. We observed significantly higher total capsaicinoid contents in control fruits compared to that resulting from red and green shading treatments at the second harvest, and that resulting from red shading treatment at the third harvest. Analysis of photosynthetic activity revealed a significant and negative correlation between Fv/Fm values and total capsaicinoid contents in both hybrids (p < 0.001). Based on the obtained results, the harvest of peppers during summer should be promoted to produce fruits with high pungency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1798-1803
• /
• 2003

In this work the dynamic heat transfer occurring in a cable penetration fire stop system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealants. The dynamic heat transfer can be described by a partial differential equation (PDE) and its initial and boundary conditions. For the shake of simplicity PDE is divided into two parts; one corresponding to the heat transfer in the axial direction and the other corresponding to the heat transfer on the vertical layers. Two numerical methods, SOR (Sequential Over-Relaxation) and FEM (Finite Element Method), are implemented to solve these equations respectively. The axial line is discretized, and SOR is applied. Similarly, all the layers are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The heat fluxes on the layers are calculated by FEM. It is shown that the penetration cable influences the temperature distribution of the fire stop system very significantly. The simulation results are shown in the three-dimensional graphics for the understanding of the transient temperature distribution in the fire stop system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.336-343
• /
• 2009

Because ships are very isolated and independent objects when sailing on the ocean, if a fire and smoke occurs, nobody can be sure to escape safely from ship at the moment. On the focus of the relationship between the sight transmissivity by fire smoke density and the life safety, this study performs simulations and experiments, respectively. To evaluate the theoretical evacuation time, CFAST software which is known as a 2 zone model analysis tool is used, and the result is 54 seconds from ECR(Engine Control Room) exit to upper deck exit and 34 seconds from bosun store to upper deck exit. And totally 12 types of experiments are performed with other 10 persons per experiment. As the result, it is cleared that the low sight transmissivity leads to the low life safety and the obstruction which can be happen unexpectedly on the evacuation way on fire makes it worse. At the condition of the smoke density 0%, over 90% people arrive at upper deck exit safely. But with the transmissivity of 8%, 70%(from ECR) and 30%(from bosun store) among experiment persons of each can survive, and with same density and unexpected obstruction, the survival ratio goes down to only 20% and 10%.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.876-880
• /
• 2013

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The principal factor of the fire is electric arc or spark accompanied with such electric faults. Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB), that is, Residual Current Protective Devices (RCDs) used on low voltage distribution lines cut off earth leakage and overload, but the RCD can not cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied in low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To improve such problems, this paper studies on an arc fault circuit interrupter (AFCI) using the distorted voltage wave in electric arc faults. The proposed voltage sensing type AFCI is an electrical fire prevention apparatus of new conception that operates a circuit breaker with sensing the instantaneous voltage drop of line voltage at electrical faults occurrence. The proposed AFCI is composed of control circuit topology using some semiconductor switching devices. Some experimental tests of the proposed AFCI confirm practicality and the validity of the analytical results.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.15-23
• /
• 2012

$CO_2$ 소화설비의 소화성능 시험방법에는 직접시험방법이 가장 좋지만, 고비용과 환경문제 그리고 시험절차의 어려움으로 간접시험방법을 사용하는 경우가 많다. 그러나 석유화학플랜트나 원자력발전소와 같은 국가 중요위험시설은 화재가 발생하면 대형피해가 발생할 수 있으므로 직접방사시험을 통해 소화성능을 검증할 필요가 있다. 본 연구는 국가 중요위험시설에 설치된 전역방출방식의 $CO_2$ 소화설비 중에서 표면화재 방호구역과 심부화재 방호구역을 각각 선정하여 $CO_2$ 소화설비의 소화성능을 검증해 보았다. 소화성능은 방호구역 내에 방사된 $CO_2$의 농도가 설계농도기준(NFSC 및 NFPA)에 만족해야 그 성능을 인정받을 수 있다. 여기서, 설계농도는 $CO_2$ 소화약제가 화염을 제어할 수 있는 소화농도에 여유율 20 %를 감안한 농도를 의미한다. 시험결과 표면화재와 심부화재 방호구역 모두 $CO_2$ 설계농도를 확보하고 있음을 확인하였고 심부화재의 경우에는 20분 이상 설계농도가 유지되었다. 본 연구를 통해 국가 중요위험시설에 대한 직접방사시험 방법 및 판정방법을 소개하였고 향후 이와 같은 국가 중요위험시설에는 직접방사시험을 통해 소화설비의 신뢰성을 검증해야 할 필요성을 제기하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.325-329
• /
• 1998

This paper describes the controller for the improving speed control of the AC servo motor. The microprocessor provides an output to the difference in command. the servo system improves the characteristics of speed control. When the motor is running at the same speed as set by the reference signal, the speed encoder also provides a signal of the same frequency. Thus, the microprocessor controlled digital techniques enable to realize the flexible performance and control which was possible with time constant of linear acceleration/deceleration. We can know that optimal speed of machining center is 75msec in 30000mm/min and actually, 75msec is using on machining center. Finally experimental results prove excellent performance of this control system. This can be reduced error with more exact measure of actual speed. The system can be adaptable to CNC machine.