• 제목/요약/키워드: fire behavior

검색결과 593건 처리시간 0.025초

일본의 BRI2002를 활용한 건물의 연기성상에 대한 해석적 연구 (An analytical Study on the Smoke Behavior using BRI 2002 in Japan)

  • 김동은;서동구;홍해리;권영진
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2010년도 추계학술발표회 자료집
    • /
    • pp.287-290
    • /
    • 2010
  • 최근 건축물은 초고층화 대형화 지하심층화 등으로 변모하고, 더나아가 복합화가 진행되고 있다. 이러한 건축물은 화재 발생 시 기존의 건축물보다 큰 인재로서 다가오며, 특히 연기로 인한 피해가 주를 이루고 있다. 하지만 국내의 경우 연기의 피해에 따른 피난용량설정 및 계획 등에 관한 연구가 미흡한 실정이다. 따라서 본 연구는 기존 개발된 일본의 연기 거동 해석모델인 BRI2002의 메커니즘를 이용하여, 가상의 건축물에서의 Case Study를 통한 연기거동을 분석함으로서 향후 연기거동에 대한 연구의 방향성 및 기초적인 자료를 구축하는데 그 목적이 있다.

  • PDF

초고층 건축물의 화재 시 피난로 연기거동에 관한 실험 및 해석적 연구 (An Experimental and Analytical Studies on the Smoke Movement by Fire in High Rise Building)

  • 신이철;김수영;이주희;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2008년도 춘계 학술논문 발표대회
    • /
    • pp.11-14
    • /
    • 2008
  • A study on the fire and smoke behavior on experiments and analysis through STAR-CD in using about behavior analysis of the smoke. Kerosene of 3L in using on the experimental garden of 30cm in diameter same applies to heat release rate(HRR), buoyant force by Plume can be calculated at a rate of 1m/s. The result of experiment in average of velocity were 0.29m/s, and interpreted result were 0.28m/s. Besides, it is proved by interpreted that behavior of smoke movement can be not observed in the experiment. After smoke is Plume increased, ceiling-jet in formation being descend in smoke layer will be more thick smoke layer, and then vertical wall is collapsed in formation of wall-jet being descend. It is defined that smoke layer is more thick through descending course in wall-jet and ceiling-jet.

  • PDF

이성분계 용액의 최대인화점 현상의 측정과 예측 (The Measurement and Prediction of Maximum Flash Point Behavior for Binary Solution)

  • 하동명;이성진
    • 한국화재소방학회논문지
    • /
    • 제27권5호
    • /
    • pp.70-74
    • /
    • 2013
  • 인화점은 액체 용액의 폭발과 화재의 위험성을 특징짓는 가장 중요한 물성치 중 하나이다. 액체 혼합물의 최대인화점은 용액을 구성하는 개별 성분들의 인화점보다 높은 것을 의미한다. 본 연구에서는 2-pentanol+acetic acid 계의 인화점을 Seta flash 밀폐식 장치를 통해 측정하였다. 이 계는 최대인화점 현상을 나타내었다. 또한 인화점은 Raoult의 법칙을 이용하여 예측하였고, van Laar 식과 Wilson 식을 활용한 최적화 기법에 의해서도 예측하였다. 최적화 기법에 의한 예측 방법이 Rauolt의 법칙에 의한 예측 방법 보다 측정치를 잘 모사하였다.

경계조건에 따른 일반강재 적용 보부재의 내화성능 연구 (Study on the Fire Resistance of Structural Beams Made of Ordinary Structural Steel(SS 400) According to Boundary Conditions)

  • 권인규
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 추계 학술논문 발표대회
    • /
    • pp.167-168
    • /
    • 2014
  • Building destruction can be occurred by decreasing of structural stability and deformation according to fire. Especially, a structural behavior of beam can be shown a slightly difference by beam types. In this paper, an evaluation of the structural stability of beam made of ordinary structural steel designed by fixed and simple boundary condition was done by an analytic method using mechanical properties of SS 400 and an heat transfer theory.

  • PDF

FIRE DISASTER SIMULATION BASED ON PARTICLE SYSTEM

  • Shin, Zen-Chung;Chen, Yean-Liang
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
    • /
    • pp.195-200
    • /
    • 1999
  • In computer graphics, the modeling and simulation of flames is a challenging problem. In this paper, we propose an approach for the simulation of a fire disaster. We use particle systems to describe the dynamic behavior fire. The illumination of dynamic flame is rendered by progressive radiosity algorithm.

내화설계법에 따른 철골조 아파트의 내화피복비용 연구 (Cost Analysis for Fire Protection on Structural Members of Residential Steel Building using Fire Engineering Design)

  • 권인규;정영진
    • 한국화재소방학회논문지
    • /
    • 제24권1호
    • /
    • pp.81-89
    • /
    • 2010
  • 건축물의 내화성능은 화재의 피해를 최소화하기 위해 요구되고 있으며, 건축물의 용도 및 층수 등에 따라 일률적으로 정해지고 있으나, 실제 발생되는 건축물 화재의 크기와 구조부재의 응력, 변형은 매우 다양한 조건에 의해 달라진다. 스웨덴, 영국, 뉴질랜드, 호주 및 일본 등의 국가에서는 건축물의 화재크기에 영향을 미칠 수 있는 여러 변수를 공학적인 수단을 활용하여 구조체 안전성을 평가하는 공학적 내화설계를 사용하고 있다. 본 논문은 공학적 내화설계의 경제적 효과를 검증하기 위하여 21층의 철골조 공동주택을 공학적 내화설계와 사양적 내화설계에 의한 내화피복비용을 비교분석하였으며, 그 결과 공학적 내화설계절차에 의한 철골조 아파트의 기둥부재 및 보부재는 무내화피복으로 내화성능을 만족하였으며, 내화피복비용 절감효과는 약 90% 수준으로 나타났다.

Modeling and simulation of large crowd evacuation in hazard-impacted environments

  • Datta, Songjukta;Behzadan, Amir H.
    • Advances in Computational Design
    • /
    • 제4권2호
    • /
    • pp.91-118
    • /
    • 2019
  • Every year, many people are severely injured or lose their lives in accidents such as fire, chemical spill, public pandemonium, school shooting, and workplace violence. Research indicates that the fate of people in an emergency situation involving one or more hazards depends not only on the design of the space (e.g., residential building, industrial facility, shopping mall, sports stadium, school, concert hall) in which the incident occurs, but also on a host of other factors including but not limited to (a) occupants' characteristics, (b) level of familiarity with and cognition of the surroundings, and (c) effectiveness of hazard intervention systems. In this paper, we present EVAQ, a simulation framework for modeling large crowd evacuation by taking into account occupants' behaviors and interactions during an emergency. In particular, human's personal (i.e., age, gender, disability) and interpersonal (i.e., group behavior and interactions) attributes are parameterized in a hazard-impacted environment. In addition, different hazard types (e.g., fire, lone wolf attacker) and propagation patterns, as well as intervention schemes (simulating building repellent systems, firefighters, law enforcement) are modeled. Next, the application of EVAQ to crowd egress planning in an airport terminal under human attack, and a shopping mall in fire emergency are presented and results are discussed. Finally, a validation test is performed using real world data from a past building fire incident to assess the reliability and integrity of EVAQ in comparison with existing evacuation modeling tools.