• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.99-103
• /
• 2014

A hypoid gear is a type of spiral bevel gear whose axis does not intersect with the axis of the meshing gear. The size of a hypoid gear is compact and the ratio of contact is high; therefore, the noise is lower than in other types. Due to these characteristics, the hypoid gear is commonly used in manufacturing processes such as those of escalators and subway screen doors. The purpose of this paper is to develop a reducer using the hypoid gear. In order to check the stability of the proposed reducer, 3D modeling is carried out by CATIA, and a structural analysis is performed using FEM (a finite element method).

• Journal of the Optical Society of Korea
• /
• v.18 no.1
• /
• pp.9-14
• /
• 2014

We numerically investigate the effect of sunlight polarization on the absorption efficiency of V-shaped organic solar cells (VOSCs) using the finite element method (FEM). The spectral distribution of absorbance and the spatial distribution of power dissipation are calculated as a function of the folding angle for s-and p-polarized light. The absorption enhancement caused by the light-trapping effect was more pronounced for s-polarized light at folding angles smaller than $20^{\circ}$, where s-polarized light has a relatively larger reflectance than p-polarized light. On the other hand, the absorption efficiency for p-polarized light is relatively larger for folding angles larger than $20^{\circ}$, where the smaller reflectance at the interface of the VOSC is more important in obtaining high absorption efficiency.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.79-84
• /
• 2002

The bottom-leaded plastic(BLP) packages have attracted substantial attention since its appearance in the electronic industry. Since the solder materials have relatively low creep resistance and are susceptible to low cycle fatigue, the life of the solder joints under the thermal loading is a critical issue for the reliability The represent study established a finite element model for the analysis of the solder joint reliability under thermal cyclic loading. An elasto-plastic constitutive relation was adopted for solder materials in the modeling and analysis. A 28-pin BLP assembly is modeled to investigate the effects of various epoxy molding compound, leadframe materials on solder joint reliability. The fatigue life of solder joint is estimated by the modified Coffin-Hanson equation. The two coefficients in the equation are also determined. A new design for lead is also evaluated by using finite element analysis. Parametric studies have been conducted to investigate the dependence of solder joint fatigue life on various package materials.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.192-195
• /
• 2010

본 논문에서는 해상 크레인과 중량물의 동적 거동을 시뮬레이션하기 위해, 유한 요소 정식화(finite element formulation)를 이용하여 해상 크레인의 붐(boom)을 탄성체로 모델링 하였다. 붐은 3차원 탄성 빔(beam) 요소로 가정하고, 각 요소의 변형에 의한 변위는 형상 함수(shape function)과 절점 좌표(nodal coordinate)를 이용하여 정의하였다. 변형 변위를 이용하여 탄성 붐의 강성 행렬(stiffnes matrix)을 유도하고, 탄성 변위를 포함하는 위치 벡터를 이용하여 질량 행렬을 유도한다. 해상 크레인과 중량물로 이루어진 운동 방정식에 탄성 붐을 포함하여 유연 다물체계(flexible multibody system) 운동 방정식을 구성한다. 외력으로는 선박 유체정역학적 힘, 유체동역학적 힘, wire rope의 장력, 중력 그리고 계류력(mooring force)이 고려되었다. 먼저 요소의 개수를 변경하며 탄성 붐의 동적 거동을 시뮬레이션 하여, 유한 요소 정식화를 이용한 모델링의 타당성을 검증하였다. 그리고 해상 크레인과 중량물의 동적 거동 시뮬레이션에 탄성 붐 모델을 적용하였다.

• KCI Concrete Journal
• /
• v.12 no.1
• /
• pp.17-22
• /
• 2000

This Paper deals with the analysis of both unstrengthened and strengthened prestressed concrete girder bridges. Finite element method is utilized to perform the analysis of superstructures. Based on the grillage method of analysis. emphasis is Placed on the modeling techniques for structures. The conventional grillage method of analysis is modif'=ed so that the interaction between the slab and gilder behaviors can be taken into account in the analysis A Prototype of simply supported prestressed I-type girder bridge is selected for the analysis. The results of numerical analyses are compared with those of load test. The results of analysis indicate that the proposed method of analysis gives more realistic response of bridges than the conventional grillage method.

• Computers and Concrete
• /
• v.4 no.1
• /
• pp.33-47
• /
• 2007

Slipforming is a construction method in which the forms move continuously during concrete placement. This paper presents a numerical procedure based on the finite element method to simulate the thermal behavior of concrete during slipforming operations. The validity of the model was successfully tested by simulating a very complex but well documented field case of actual slipforming operations performed during the construction of an offshore concrete oil platform structure. The results obtained have been related to the shape of the concrete "hardened front" in the forms, which allows quick evaluation of the operation. The results of the numerical investigation have shown that the shape of the "hardened front" can be affected by the temperature of the fresh concrete and ambient conditions. For a given initial concrete temperature, there are limitations for the ambient temperature that, when exceeded, can create an unfavorable shape of the concrete "hardened front" in the forms. Similarly, for a given ambient temperature, the initial concrete temperature should not be fall below an established limit in order to avoid unfavorable shape of the "hardened front".

• Computers and Concrete
• /
• v.4 no.1
• /
• pp.67-82
• /
• 2007

The discrete crack-concept is applied to study the 3D propagation of tensile-dominated failure in plain concrete. To this end the Partition of Unity Finite Element Method (PUFEM) is utilized and the strong discontinuity approach is followed. A consistent linearized implementation of the PUFEM is combined with a predictor-corrector algorithm to track the crack path, which leads to a robust numerical description of concrete cracking. The proposed concept is applied to study concrete failure during the PCT3D test and the predicted numerical results are compared to experimental data. The proposed numerical concept provides a clear interface for constitutive models and allows an investigation of their impact on concrete cracking under 3D conditions, which is of significant scientific interests to interpret results from 3D experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1378-1384
• /
• 2011

In this paper, the electromagnetic shielding performance of a BiMODAL Tram is investigated by means of an electromagnetic analysis tool, called HFSS. For the purposed of doing this, first, three-dimensional finite element modeling for the tram including electronic devices and engine room is carried out. Then, for quantitatively assessing the electromagnetic shielding performance of the tram's body, concentration indexes for electric field magnitude and time-average stored electric energy are introduced. From numerical results, it is inferred that the tram's body can protect the electronic devices and engine room against external electromagnetic waves from 30 MHz to 100 MHz.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.307-314
• /
• 2018

In this paper, analytical modeling of lift and drag forces in permanent magnet electrodynamic suspension systems (PM EDSs) are presented. After studying the impacts of PM dimensions on the permanent magnetic field and developed lift force, it is indicated that there is an optimum PM length in a specified thickness for a maximum lift force. Therefore, the optimum PM length for achieving maximum lift force is obtained. Afterward, an objective design optimization is proposed to increase the lift force and to decrease the material cost of the system by using Genetic Algorithm. The results confirm that the required values of the lift force can be achieved; while, reducing the system material cost. Finite Element Analysis (FEA) and experimental tests are carried out to evaluate the effectiveness of the PM EDS system model and the proposed optimization method. Finally, a number of design guidelines are extracted.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.11
• /
• pp.749-756
• /
• 2000

Detent force develops generally undesirable effect that contributes to the output ripple of machine, vibration and noise. This paper proposes detent force minimization techniques for a Permanent Magnet Linear Synchronous Motor (PMLSM). In addition, thrust according to each minimization technique is estimated to observe the change of machine performance. A two-dimensional Finite Element Method is used to predict detent force and thrust due to structural factors and non-linearity. And moving node technique for geometric models is proposed to reduce modeling time and efforts.