• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.13-21
• /
• 2014

This study analyzed the differences in the analysis techniques through a comparative analysis of the various segment's modeling techniques of Shield TBM method and proposed reasonable modeling techniques. Also, this study suggested reasonable estimating methods of load to be applicable in the field through the load analysis and three-dimensional finite element analysis by estimating model of rock mass relaxation load. Estimating method of relaxation area by rock mass rating makes no odds of output in subgrade with high rock mass rating, but so the difference of output is large, that is judged to set conservative design off. In estimating result of rock mass relaxation area by three-dimensional analysis relaxation area of subgrade with low-grade soil was predicted to be positioned at medium-range of many methods, in case of designing segment in subgrade with low-grade soil it needs to actively review estimation of relaxation area through three-dimensional analysis reflecting mechanical tunnel excavation.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.825-827
• /
• 2000

자성체를 포함하는 자기 시스템을 해석하는데 있어 비선형과 히스테리시스(Hysteresis)는 매우 중요한 역할을 한다. 특히 재질의 히스테리시스 특성을 유한요소법(FEM)을 이용하여 계산하기 위해서 많은 방법들이 소개되었다. 단순 반복법이나 Fixed Point Technique(FPT), M-iteration 법. 뉴튼 랍슨 (Newton-Raphson) 법 등이 그 예이다. 이 방법들 중에서 뉴튼 랍슨법은 빠른 수렴 특성으로 가장 많이 사용되고 있다. 하지만 뉴튼-랍슨법을 이용하여 히스테리시스 재질을 해석할 때는 매 반복 계산 때마다 계 계수행렬(System Stiffness matrix)이 변화하기 때문에 요소의 수가 매우 많을 경우 역행렬을 계산하기 위한 시간이 많이 소요되는 단점이 있다. 특히 히스테리시스 해석의 경우에는 주로 time-step법을 이용하여 계산하므로 가장 시간이 많이 소요되는 행렬 계산 시간을 단축함으로써 전체 계산 시간을 크게 줄일 수 있다. 최근 비선형 해석에서 TLM(Transmission Line Modeling)법이 도입되어 비선형 해석 시의 계산 시간을 크게 단축할 수 있게 되었다. 본 논문에서는 비선형 해석에 적용된 TLM법을 히스테리시스 해석에 적용하는 방법을 새로 제안한다. TLM법은 뉴튼-랍슨법과 달리 각 반복 계산 때마다 계수행렬식이 변화하지 않고 단지 구동항만 변하기 때문에 행렬의 LU를 한 번 저장해 두면 forward와 backward substitution만 시행하면 된다. 따라서 요소의 수가 증가할 경우 TLM법을 사용하면 뉴튼-랍슨법에 비해 매우 큰 계산 이득을 얻을 수 있다. 본 논문에서는 TLM법을 히스테리시스에 적용하는 방법을 기술하고 간단한 모델에 이 방법을 적용하여 뉴튼-랍슨법과의 비교를 통해 TLM법의 효용성을 보인다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.151-160
• /
• 2002

A modeling system for three-dimensional flow (FEMOS) has been developed and applied to simulate the tidal currents of Asan Bay. The system can consider tidal flats changing with time and uses a finite element method that can adapt coastline change effectively. The simulation results for Asan Bay with large tidal flats, shallow water depth and high tidal range showed good agreements with the observed currents of long-term variations at the medium layer and short-term variations of vertical profiles. Based on the simulated tidal currents, the horizontal distributions of bottom shear stress were calculated and showed close relation with the change of bottom topography. The system can be used widely to study coastal circulation in the coastal region with complex geography.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.291-298
• /
• 2002

We have developed a two-dimensional (2-D) magnetotelluric (MT) inversion algorithm, which can include topographic effects in inversion. We use the finite element method (FEM) to incorporate topography into forward calculation. Topography is implemented simply by moving nodes of rectangular elements in z-direction according to the elevation of air-earth interface. In the inversion process, we adopt a spatially variable Lagrangian multiplier algorithm in the smoothness-constrained least-squares inversion. The inversion algorithm developed in this study reconstructs subsurface resistivity structure quite well when topography variation exists. Also, it turns out to be effective in both resolution and stability from a model study and field data application.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.3
• /
• pp.31-39
• /
• 2010

The particle system based on quad mesh has been posed to model cloth. But we need to develop cloth models on triangular meshes because they are widely used. Cloth modeling on triangular mesh is often done in the style of finite element method, which assumes that material is continuous. To preserve the advantages of particle system, e.g. model simplicity and the ease of implementation, even on triangular mesh, this paper proposes a particle system on triangular mesh. The motion of cloth is modeled so that vertices interact with each other via the edges on the triangular mesh. The interactions of vertices are assumed to exist between every adjacent vertex and between every other vertex. The deformation energy due to interaction is constructed based on the theory of elasticity. The contribution of the paper is to implement the advantages of particle system on triangular mesh.

• Smart Structures and Systems
• /
• v.12 no.2
• /
• pp.97-119
• /
• 2013

This paper presents numerical and experimental results on the use of guided waves for structural health monitoring (SHM) of crack growth during a fatigue test in a thick steel plate used for civil engineering application. Numerical simulation, analytical modeling, and experimental tests are used to prove that piezoelectric wafer active sensor (PWAS) can perform active SHM using guided wave pitch-catch method and passive SHM using acoustic emission (AE). AE simulation was performed with the multi-physic FEM (MP-FEM) approach. The MP-FEM approach permits that the output variables to be expressed directly in electric terms while the two-ways electromechanical conversion is done internally in the MP-FEM formulation. The AE event was simulated as a pulse of defined duration and amplitude. The electrical signal measured at a PWAS receiver was simulated. Experimental tests were performed with PWAS transducers acting as passive receivers of AE signals. An AE source was simulated using 0.5-mm pencil lead breaks. The PWAS transducers were able to pick up AE signal with good strength. Subsequently, PWAS transducers and traditional AE transducer were applied to a 12.7-mm CT specimen subjected to accelerated fatigue testing. Active sensing in pitch catch mode on the CT specimen was applied between the PWAS transducers pairs. Damage indexes were calculated and correlated with actual crack growth. The paper finishes with conclusions and suggestions for further work.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.2
• /
• pp.135-143
• /
• 2017

A customized CFD simulator to perform thermo-fluid dynamic simulations of an HVAC for an indoor space is presented. This simulation system has been developed for engineers studying architectural engineering, as the HVAC mechanical systems used in housings and buildings. Hence, all functions and options are so designed to be suitable that they are suitable for non-CFD experts as well as CFD engineers. A Computational mesh is generated by open-source libraries, FEMM (Finite Element Method Magnetics), and OpenFOAM. Once the boundary conditions are set, the fluid dynamic calculations are performed using the OpenFOAM solver. Numerical results are validated by comparing them with the experimental data for a simple indoor air flow case. In this paper, an entirely new calculation process is introduced, and the flow simulation results for a sample office room are also discussed.

• Coupled systems mechanics
• /
• v.8 no.4
• /
• pp.299-313
• /
• 2019

The paper represents computer modeling of the deformed state of physically nonlinear transversally isotropic bodies with hole. In order to describe the anisotropy of the mechanical properties of transversally-isotropic materials a structurally phenomenological model has been used. This model allows representing the initial material in the form of the coupled isotropic materials: the basic material (binder) considered from the positions of continuum mechanics and the fiber material oriented along the anisotropy direction of the original material. It is assumed that the fibers perceive only the axial tensile-compression forces and are deformed together with the base material. To solve the problems of the theory of plasticity, simplified theories of small elastoplastic deformation have been used for a transversely-isotropic body, developed by B.E. Pobedrya. A simplified theory allows applying the theory of small elastoplastic deformations to solve specific applied problems, since in this case the fibrous medium is replaced by an equivalent transversely isotropic medium with effective mechanical parameters. The essence of simplification is that with simple stretching of composite in direction of the transversal isotropy axis and in direction perpendicular to it, plastic deformations do not arise. As a result, the intensity of stresses and deformations both along the principal axis of the transversal isotropy and along the perpendicular plane of isotropy is determined separately. The representation of the fibrous composite in the form of a homogeneous anisotropic material with effective mechanical parameters allows for a sufficiently accurate calculation of stresses and strains. The calculation is carried out under different loading conditions, keeping in mind that both sizes characterizing the fibrous material fiber thickness and the gap between the fibers-are several orders smaller than the radius of the hole. Based on the simplified theory and the finite element method, a computer model of nonlinear deformation of fibrous composites is constructed. For carrying out computational experiments, a specialized software package was developed. The effect of hole configuration on the distribution of deformation and stress fields in the vicinity of concentrators was investigated.

• Steel and Composite Structures
• /
• v.38 no.2
• /
• pp.223-239
• /
• 2021

This paper presents the analytical modeling and finite element (FE) analysis, using ABAQUS software, of the new types of steel reinforced lightweight aggregate concrete (SRLAC) columns with cross-shaped (+shaped and X-shaped) steel section, using proposed three analytical and two FE models in total. The stress-strain material models for different components in the columns, including the confined zones of the lightweight aggregate concrete (LWAC) using three and four concrete zones divisions approaches and with and without taking into account the stirrups reaction effect, are established first. The analytical models for determining the axial load-deformation behavior of the SRLAC columns are drawn based on the materials models. The analytical and FE models' results are compared with previously reported test results of the axially loaded SRLAC columns. The proposed analytical and FE models accurately predict the axial behavior and capacities of the new types of SRLAC columns with acceptable agreements for the load-displacement curves. The LWAC strength, steel section ratio, and steel section configuration affect the contact stress between the concrete and steel sections. The average ratios of the ultimate test load to the three analytical models and FEA model loads, Put /Pa1, Put /Pa2, Put /Pa3, and Put /PFE1, for the tested specimens are 0.96, 1.004, 1.016, and 1.019, respectively. Finally, the analytical parametric studies are also studied, in terms of the effects of confinement, LWAC strength, steel section ratio, and the reinforcement ratio on the axial capacity of the SRLAC column. When concrete strength, confinements, area of steel sections, or reinforcement bars ratio increased, the axial capacities increased.

• Structural Engineering and Mechanics
• /
• v.83 no.2
• /
• pp.207-227
• /
• 2022

In general, the interaction conditions between the discrete stones are not taken into account by structural engineers during the modeling and analyzing of historical stone bridges. However, many structural damages in the stone bridges occur due to ignoring the interaction conditions between discrete stones. In this study, it is aimed to examine the seismic behavior of a historical stone bridge by considering the interaction stiffness parameters between stone elements. For this purpose, Tokatli historical stone arch bridge was built in 1179 in Karabük-Turkey, is chosen for three-dimensional (3D) seismic analyses. Firstly, the 3D finite-difference model of the Tokatli stone bridge is created using the FLAC3D software. During the modeling processes, the Burger-Creep material model which was not used to examine the seismic behavior of historical stone bridges in the past is utilized. Furthermore, the free-field and quiet non-reflecting boundary conditions are defined to the lateral and bottom boundaries of the bridge. Thanks to these boundary conditions, earthquake waves do not reflect in the 3D model. After each stone element is modeled separately, stiffness elements are defined between the stone elements. Three situations of the stiffness elements are considered in the seismic analyses; a) for only normal direction b) for only shear direction c) for both normal and shear directions. The earthquake analyses of the bridge are performed for these three different situations of the bridge. The far-fault and near-fault conditions of 1989 Loma Prieta earthquake are taken into account during the earthquake analyses. According to the seismic analysis results, the directions of the stiffness parameters seriously changed the earthquake behavior of the Tokatli bridge. Moreover, the most critical stiffness parameter is determined for seismic analyses of historical stone arch bridges.