• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.690-696
• /
• 2019

Geopolymer is an alumina silicate-based ceramic material that has good heat-resistance and fire-resistance; it can be cured at room temperature, and thus its manufacturing process is simple. Geopolymer can be used as a reinforcement or floor finish for high-speed curing applications. In this manuscript, we investigate a high-speed curing geopolymer achieved by adding calcium to augment the curing rate. Metakaolin is used as the main raw material, and aqueous solutions of KOH and $K_2SiO_3$ are used as the activators. As a result of optimizing the high bending strength as a target factor for geopolymers with $SiO_2/Al_2O_3$ ratio of 4.1 ~ 4.8, the optimum ranges of the active agent are found to be $0.1{\leq}K_2O/SiO_2{\leq}0.4$ and $10{\leq}H_2O/K_2O{\leq}32.5$, and the optimum range of the curing accelerator is found to be $$0.82{\leq_-}Ca(OH)_2/Al_2O_3{\leq_-}2.87$$. The maximum flexural strength is found to be 1.35 MPa at $Ca(OH)_2/Al_2O_3=2.82$, $K_2O/SiO_2=0.3$, and $H_2O/K_2O=11.3$. The physical and thermal properties are analyzed to validate the applicability of these materials as industrial insulating parts or repairing finishing materials in construction.

• Journal of Fashion Business
• /
• v.25 no.1
• /
• pp.1-15
• /
• 2021

Consumption value has widened, not only in functional but also aesthetic aspects, and consumers have started to find products that are more individual and emotional. The pattern of natural motifs meets the needs of consumers, and the marble is also widely used in patterns as one of the natural motifs. In this study, we analyzed many fashion items and other products with marble patterns based on the elements of CMF design, which are important points in merchandise design. For research, data on marble and its patterns have been found in professional books about marble. Foreign and domestic cases were investigated from well-known design exhibitions. Results of the study demonstrate the potential for pattern representation that stimulates consumers' senses by using color or material to express a variety of visual patterns, and using many finishing methods to express textured patterns. However, most of the domestic cases have only imitated the visual features of marble patterns, and very few have expanded the scope of the use of the patterns. A domestic research study was conducted only on the chemical features of marble, while research on the color and design of the visual aspects has been conducted passively. Therefore, This study will attribute designers to come up with creative pattern design and secure many consumers. Above all, we hope that the expansion of material representations will help designers break away from today's stereotypes of the characteristics of the materials and emotional expression.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.41-49
• /
• 2021

This study was to solve the lift problem of the existing unit curtain wall type by using the vertical material mullion as a rail in curtain wall, which is recently used as an external finishing material for high-rise buildings. It has been shown that the application of the curtain wall mullion's rail can be quantified even at 20m/sec wind speed through the Mock-Up test. Based on the sites selected for comparison of construction methods, it was analyzed that the construction period could be shortened by 48 days, or about 20 percent. It was analyzed that the number of construction workers could be reduced by about 33 percent from the previous nine to six. Based on these results, assuming the installation of curtain wall units of 10,000㎡, it is judged that construction cost can be reduced by 80% or more.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.38-45
• /
• 2022

Sound absorbing materials are being developed in various materials and shapes and they are being applied in many fields such as construction, transportation, civil engineering, and sound. Among many sound-absorbing materials, polyester fiber has no environmental problems and harmfulness, and is a material with good sound absorption properties while being inexpensive. So it is manufactured as a nonwoven sound-absorbing material and used in various fields. In this study, polyester dry-laid nonwoven with different basis weight were manufactured using three types of polyester staple fibers: regular solid, single-hole hollow, and low linear density. We focused on the effects of the properties of the fibers, which constitute nonwovens, on the sound absorption properties, and we considered the basis weight. As the basis weight of the nonwoven fabric increased, the pore size became smaller and the air permeability was lowered, but the sound absorption coefficient was higher. However, the single-hole hollow polyester fiber did not contribute to the increase of the sound absorption coefficient of the nonwoven. It was established that, lower fiber fineness caused the sound absorption coefficient of the nonwoven to be increased. It was also found that the increase in the sound absorption coefficient due to the application of low fineness appeared from a certain basis weight or more.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.109-116
• /
• 2022

Tire codes are made of materials such as hemp, cotton, rayon, nylon, steel, polyester, glass, and aramid are fiber reinforcement materials that go inside rubber to increase durability, driveability, and stability of vehicle tires. The reinforcement of the tire cord may construct a composite material using tires such as automobiles, trucks, aircraft, bicycles, and fibrous materials such as electric belts and hoses as reinforcement materials. Therefore, it is essential to ensure that the adhesive force between the rubber and the reinforced fiber exhibits the desired physical properties in the rubber composite material made of a rubber matrix with reinforced fibers. This study is a study on the heat treatment conditions for improving the adhesion strength of the tire cord and the reinforced fiber for tires. The core technology of the drying process is a uniform drying technology, which has a great influence on the quality of the reinforcement. Therefore, the uniform airflow distribution is determined by the geometry and operating conditions of the dryer. Therefore, this study carried out a numerical analysis of the shape of a drying nozzle for improving the performance of hot air drying in a dryer used for drying the coated reinforced fibers. In addition, the flow characteristics were examined through numerical analysis of the study on the change in the shape of the chamber affecting drying.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.117-126
• /
• 2022

In this study, thermoplastic composites were manufactured using ABS(acrylonitrile butadiene styrene), PC(polycarbonate), and POE(polyolefin elastomer), which are thermoplastic plastics. Twin screw extruder and injection molding were used to manufacture thermoplastic composites. When the ABS/PC/POE thermoplastic composite material was manufactured, the POE mass fraction was set to 1 to 5 wt.%, and the thermal and mechanical properties according to the POE mass fraction were analyzed. Based on the physical properties of ABS/PC/POE, a 3D model in the form of an e-bike frame was created. After setting the boundary conditions, when an external load is applied, geometry simulation was performed to predict product performance. The ABS/PC/POE thermoplastic composite material exhibited the best physical properties when the mass fraction of POE was 3 wt.%. In the simulation results for the physical properties of the 3D model in the form of an e-bike frame, the best physical properties were shown when the mass fraction of POE was 2 ~ 3 wt.%. As a result, the manufacturing conditions for ABS/PC/POE thermoplastic composite materials were set, and research was conducted to reduce product development costs and development time.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.128-136
• /
• 2023

Recently, the automobile industry is developing as the demand for automo- biles increases due to industrial development and population growth. In addition, many studies are being conducted to reduce heat loss inside the automobiles in order to save energy inside the automobiles due to environmental regulations. In this study, alumina, nanosilicon, and aerogel, which are adiabatic materials, were filled in PET to manufacture yarn, identify physical and mechanical properties, and weave into fabric to confirm adiabatic performance. As the content of the adiabatic material increased, the tensile strength of the fibers filled with alumina and nanosilicon decreased greatly, and the adiabatic property slightly increased. The tensile strength of fibers filled with the aerogel decreased slightly, but the adiabatic properties were greatly increased. Therefore, it is considered to be due to the large volume fraction in the PET yarn due to the low density of the aerogel.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.35-45
• /
• 2005

The purpose of this study was to evaluate thermal properties of soccer wear with different materials and designs. As a beginning step, the questionnaire survey about the actual condition of soccer wears was conducted. with the results of the questinnaire, two soccer wears with new material and design that were improved in tactile sensations, absorption and ventilation were developed. We evaluated thermal and subjective responses of subjects wearing Korea national soccer team uniform in 1998 World Cup (Uniform 98), soccer wear with new material and same design(New II) and with new material and new design(New I). New I was made with mesh in armhole for improving ventilation. Rectal temperature, skin temperature, clothing microclimate, and heart rate were measured in climatic chamber test(twelve times) and field test(eighteen times). The results were as follows. 1. As the results of the climatic chamber test, rectal temperature was lower in New I and New II than Uniform98, and mean skin temperature was lower in New I than Uniform 98 and New II. Heart rate was lower in New I than New II, and total body weight loss and local sweating were not significantly different by soccer wears. 2. As the results of the field test, rectal temperature was lower in New I than Uniform98 and New II. Mean skin temperature was lower in New II than Uniform98 and New I. Clothing microclimate temperature was lower in New II than Uniform98 and New 1, and clothing microclimate humidity was lower in New I, New II than Uniform 98. Heart rate was lower in New I than Uniform 98, New II and total body weight loss and local sweating were lower in New I, New II than Uniform 98. In conclusion, New I using new design using mesh in armhole and new material using sweat absorbent finishing was excellent from the point of view of physical responses, ventilation and sweat absorption.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.9-18
• /
• 2020

In this study, we conducted alkali hydrolysis on sea-island type PET ultramicrofiber tricot fabric and dyeing according to the various conditions with black disperse dye. Herein, we evaluated the weight loss rate and tensile strength according to the NaOH contents. The optimal alkali hydrolysis treatment conditions were set to 25 %omf NaOH with a treatment time of 60 min at 110 ℃, and average weight loss rate of the PET ultramicrofiber tricot fabric is about 23 %. The dyeing conditions were investigated with different dyeing temperatures(95-135 ℃), dyeing time(20-60 min), dye contents(2-10 %omf), dispersant contents(1-9 g/ℓ), pH buffer solution contents(1-9 g/ℓ), UV-absorbent contents(5-25 %omf) and reduction cleaning process conditions for black color. We obtained the optimum conditions of the dyeing with the dye contents of 8 %omf, the dispersant contents of 1 g/ℓ, the pH buffer solution contents of 1 g/ℓ, the UV-absorbent contents of 10 %omf, the dyeing temperature of 135 ℃ and the dyeing time of 40 min. The light colorfastness of dyed ultramicrofiber PET tricot fabric was good to excellent in the range of 4 to 5.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.5
• /
• pp.435-441
• /
• 2011

The life cycle assessment on greenhouse gas emission of reinforced concrete buildings shows that more than 70 percent of greenhouse gas that is discharged by a building is discharged in the building maintenance stage, including cooling and heating. To reduce the greenhouse gas emission, maintenance planning to minimize the energy consumption is necessary in the design stage. In this paper, two heat storage rooms are tested to save the air cooling energy of the buildings. The specimens are essentially identical, except that chamber A contained paraffin sheets as the finishing material, while the other, chamber B, served as a control. The test results show that chamber A with the paraffin sheets exhibited less temperature change than chamber B without the sheets when temperature was increased outside of the specimens. The heating energy was probably consumed in the phase change of the paraffin sheets, which can be useful for reducing energy consumption related to air cooling during the summer.