• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.231-238
• /
• 2017

There are many kinds of elements and processes for the development of high quality bedding products like fiber, high-temperature heat treatment, dyeing process, tenter drying with softening agent and multiple final finishing. Especially we examined the mechanical characteristic properties of fabrics according to different yarn types. The critical physical properties of the yarn consisting the pile knitted fabrics were obtained for the development of the hi-grade bedding items. The material property and the exhaustion behaviour of the developed pile knitted fabrics composing of different yarns were measured and observed. The physical properties of the developed fabric were evaluated through the material property analysis of the yarn, the physical nature of the pile knitted fabrics and the data of the exhaustion performance; tensile strength, tensile elongation, tearing strength, cross section of yarn types, dyeing properties etc. And then high-class of bedding items were knitted using the double raschel machine to make the pile knitted fabrics.

• 한국화재소방학회논문지
• /
• 제32권4호
• /
• pp.42-49
• /
• 2018

본 연구에서는 건축음향시뮬레이션을 통하여 재실자에게 비상방송 설비에서 발생되는 비상 방송음이 명확하게 전달되는지를 알아보기 위하여 장방형 복도를 대상으로 NFSC 202의 기준에 따라 25 m 간격으로 비상 방송용 확성기가 설치되었을 때 건축마감재료 변경에 따라 음압레벨, 음성명료도 지표를 비교분석하였다. 마감재료로 흡음특성이 낮은 재료를 적용한 경우 충분한 음압 레벨은 확보할 수 있었지만, 재실자가 비상 방송음을 알아듣기 매우 어려운 수준의 음성명료도를 보였다. 마감재료로 흡음재료를 적용함에 따라 음성 명료도, 음성 전달 지수는 재실자가 잘 알아들을 수 있는 수준으로 개선이 가능한 것으로 나타났지만 재실자에게 전달되는 음압 레벨이 감소되며 같은 공간 내 레벨 차이가 크게 발생되는 것으로 나타났다. 따라서 흡음재료를 사용하여 음성명료도를 확보하고자 할 경우 고른 음압 레벨 분포를 확보하기 위하여 비상 방송용 확성기를 설치간격 조정 등이 필요한 것으로 나타났다.

• 한국건설관리학회논문집
• /
• 제9권4호
• /
• pp.84-91
• /
• 2008

최근 주택성능등급표시제, 친환경건축물인증제도 등 실내공기질에 관련한 제도가 생겨나고 공동주택 거주자 또한 실내공기 질에 대한 인식을 새롭게 하고 있다. 이러한 시대적 흐름에 발맞추어 최근 신축되거나 리모델링 되는 공동주택에는 친환경 실내마감재료가 적용되고 있다. 하지만, 친환경 실내 마감재료는 일반재료에 비해 그 가격이 고가이며, 분양가 상승을 야기한다. 또한 친환경 마감재료 적용으로 인한 분양가 상승은 거주자로 하여금 경제적 부담을 가중시키게 된다. 따라서 실내 마감공법 별로 적용되는 모든 주재료 및 부 재료에 대해서 친환경성과 경제성을 복합적으로 고려할 필요가 있다. 본 논문에서는 노후 공동주택 리모델링 마감공사 시 환경적인 요인, 경제적인 요인을 복합적으로 고려하여 효율적인 실내 마감재료를 선정하는 방안을 제안하고자 한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.953-956
• /
• 2007

최근 주택성능등급표시제, 친환경건축물인증제도 등 실내공기질에 관련한 제도가 생겨나고 공동주택 거주자 또한 실내공기질에 대한 인식을 새롭게 하고 있다. 또한, 최근의 공동주택의 실내 마감재료에 친환경 소재가 적용되고 있으나 그 가격이 고가이므로 거주자로 하여금 경제적 부담을 가중시키게 된다. 따라서 실내 마감공법 별로 적용되는 모든 주재료 및 부재료에 대해서 친환경성과 경제성을 복합적으로 고려할 필요가 있다. 본 논문에서는 노후 공동주택 리모델링 마감공사 시 환경적인 요인, 경제적인 요인을 복합적으로 고려하여 효율적인 실내 마감재료를 선정하는 방안을 제안하고자 한다.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.671-679
• /
• 2005

Chitosan is the affinitive finishing agent and gives susceptible effect in textile finishing. In order to examine the modification of polyester fabric treated with chitosan, we observed the characteristic of polyester fabric surface and measured its physical properties. For the purpose of confirming the adhesion of cationic material, we made a comparative study on anionic acid dye. The fabric was treated with crosslinking agent after chitosan finishing. Glutardialdehyde as crosslinking agent was used to improve the fixation rate of chitosan on the polyester fabric. And the US value was increased according to increasing of chitosan concentration. As the concentration of crosslinking agent was increased, whiteness index of the fabric chitosan treated was increased. Moisture regain of the fabric treated with $1\%$ chitosan was doubled and that treated with $2\%$ chitosan was tripled comparing with original fabric. Tensile strength of the chitosan treated fabric had been an increase of $10\%$ compared with alkali treated fabric and crease resistance decreased regardless of chitosan concentration.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.130-140
• /
• 2016

Floating floor is most commonly used at apartment houses in Korea for thermal insulation and reducing impact noise. But it in proven that the floating floor is not effective for reducing the floor impact noise in low frequency range. In most cases, impact sound pressure level under 63 Hz frequency band were actually increased by the resonance of resilient material, lightweight concrete and the finishing mortar installed on it. In this paper, an integrated floor system consist of 70 mm light weight concrete and 40 mm finishing mortar successively installed on the concrete slab was suggested to avoid the resonance. Integrated floor system increases total flexural stiffness and mass per unit area. The natural frequencies of first and second vibration mode were increased and acceleration response and floor impact sound level was decreased in all measurement range.

• 한국가구학회지
• /
• 제26권1호
• /
• pp.22-30
• /
• 2015

In order to prevent decay, distortion, bending, twist on wood products such as wooden furnitures, variety of coating materials were developed and used so far. The coating materials for wood finishing can be synthesized by natural resource or petroleum. However, these coating materials can cause contamination of indoor air quality due to emission of volatile organic compounds (VOCs). In this study, commercialized coating materials for wood finishing such as varnish, coat, and stain were evaluated on emission characteristics of VOCs. Among the varnish, eco-friendly products had about 15~46% lower TVOC emission ($1,042{\mu}g/m^2h{\sim}3,257{\mu}g/m^2h$, respectively, than typical product ($7,100{\mu}g/m^2h$). Natural resource based coating material showed lowest TVOC emission level. However, one of natural resource based waterborne stain showed higher TVOC emission level because waterborne stain already contained higher amount of natural VOC. Oil-based stain might not be suitable for indoor use on interior wall and furniture due to exceed amount of TVOC. Based on results, natural resource based coat or waterborne stain are recommenced to use on wood products.

• 제어로봇시스템학회논문지
• /
• 제16권10호
• /
• pp.1006-1012
• /
• 2010

The hot rolling process ranks the highest position for production in steel making process. The hot strip manufacturing processes consist of the reheating furnace, roughing and finishing mill and coiler. The reheating furnace heats the slab. The roughing and finishing mill produce the hot strip from slab. The hot strip quality mainly depends on finishing mill, which consists of 4-high 7 stands. The looper is installed between stands and is used for controlling the strip tension by the looper angle for better material flow. It is difficult to control the strip tension with the coupled looper system from interaction between the looper angle and strip tension. Too much deviation of strip tension severely affects the poor width quality of the hot strip. It is important to control simultaneously both the looper angle and strip tension with each of their target values. This paper proposes the fuzzy tension control, which is developed to minimize the width deviation of the hot strip by maintaining the proper strip tension between stands and to achieve the stable operation of the coupled looper system. The fuzzy tension control performance is compared with the conventional PID control by experimental results.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.38-50
• /
• 2018

This investigation reported the recent development of 3 dimensional fabrics such as spacer fabric, 3 dimensional multi-layered fabric and 3 dimensional braided fabric. First, we categorized 3 dimensional fabrics into 3 main products; 3 dimensional woven fabrics, 3 dimensional knitted fabrics and 3 dimensional braided fabrics with reviewing the possible main applications. We also reported the research and development trends of 3 dimensional fabrics by analyzing technical trends in industry and research institutes at domestic and overseas. United State, Germany and Japan lead the manufacturing technology for the mainly preform related products to apply in aerospace, automotive, protections, architecture and clothing applications. Lastly, we reviewed the main products of the leading company which manufactured using the 3 dimensional fabrics.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.501-508
• /
• 2014

Floor finishing materials such as floor coverings and floor mats can reduce floor impact noise easily. When an impact was applied to the floor, its finishing material is deformed and the impact force that was applied to the concrete slab is changed. The softer finishing materials were, the more impact force decreased. An experimental study was performed using 14 PVC floor coverings and 16 floor mats to capture the characteristics of impact force and impact noise in the residential buildings. The test results show that the impact force spectrum and the floor impact noise spectrum have a linear relationship in the case of a bare concrete slab, and the characteristics of impact force reduction are the same as those of floor impact noise reduction.