• 자원리싸이클링
• /
• 제18권3호
• /
• pp.27-35
• /
• 2009

부존자원의 대량소비로 인해 자원고갈 문제와 이에 따라 발생하는 폐기물처리 문제가 대두되고 있는 가운데 두 가지 문제를 동시에 해결하기 위해 현재의 사회구조를 자원소비형에서 자인순환형으로 변화하기 위할 노력이 진행되고 있다. 이런 노력의 일환으로 국내 발생 폐기물 중 가장 높은 비중을 차지하고 있는 건설폐기물에 관심이 급증하고 있지만 종합적인 처리에 대한 연구는 미흡한 실정이다. 본 연구에서는 건설폐기물의 가장 많은 단일 물질인 폐콘크리트의 자원순환을 위한 고품질 순환골재 생산 공정 연구를 진행하였다. 굵은 골재, 잔골재, 시멘트 등이 수화물의 형태로 결합되어 있는 폐콘크리트를 가열전처리 방법과 Autogenous mill을 이용한 단체분리를 통해 고품질의 콘크리트용 순환 굵은 골재를 회수하였으며, 파분쇄 후 생산된 폐콘크리트 미분은 sink/float 분리를 통한 비중분리 특성을 파악한 후 간섭침강분리를 통해 정제과정을 거쳐 고품질의 콘크리트용 순환 잔골재를 생산하였다. 따라서 본 연구를 통해 전체 건설폐기물 중 가장 높은 비중을 차지하는 폐콘크리트를 고품질 순환골재로 재활용 할 수 있는 자원순환형 처리 공정을 개발하였다.

• 한국건설순환자원학회논문집
• /
• 제4권3호
• /
• pp.299-306
• /
• 2016

본 연구에서는 동일 작업성 조건에서 저품질 잔 굵은 골재가 콘크리트의 공학적 특성에 미치는 영향을 실험적으로 분석 하고자 하였는데, 그 결과를 요약하면 다음과 같다. 먼저, 슬럼프 및 공기량을 단위수량과 AE제 혼입량 변화로 동일하게 배합설계 하였다. 따라서, 양호한 품질의 골재를 사용한 배합에 비해 저품질의 골재 사용시 불량의 입도 및 미립자량 등의 영향으로 단위수량 및 AE제 혼입량이 각각 약 18%, 98% 증가하는 경향이 나타났다. 압축강도의 경우는 양호한 품질의 부순 굵은 골재를 사용한 배합에 비해 저품질의 발파석 굵은 골재를 사용한 배합에서 특히, 발파석 마사토 및 해사와 같은 저품질 잔골재와 복합될 때 20~35% 까지 저하하는 결과를 나타내었다. 또한, 저품질 잔 굵은 골재를 사용한 콘크리트인 경우는 압축강도뿐만 아니라 탄성계수와 내구성으로 동결융해, 건조수축, 탄산화 및 염해저항성 측면에서도 크게 저하하여 그 심각이 문제시 되었다. 따라서 저품질 골재를 순환자원으로 활용하고자 할 때에는 물씻기, 혼합골재에 의한 입도 조정 등 별도의 처리를 거쳐 사용하거나 혹은 사용을 철저히 규제하는 특별한 대책이 수립 되어야 할 것으로 사료된다.

• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.323-330
• /
• 2006

As the interest in environmental pollution resulting from recent industrial development is converging, wastewater treatment problem of dying processing is one of important pending issue. Usually, flow mediation earth and settling pond etc. of processing plant to handle water or wastewater. Mediation is the wastewater that flowed past settling pond than material of heavy particles, water weight colloid particles that big solids are removed but are suspensibility material settlement exclusion impossible. So, we need flocculation and coagulation action to remove materials from this colloid state. For flocculation and coagulation action chemical agents to add back, addition of chemical agents forms floc of could settle size. That is, shorten the sedimentation time and quality of processing water because promoting sedimentation doing to do fines or suspended solids and colloid can materials large size and also, flocculation to annex efficiency of filtration augment. Therefore, I executed this research to prove that improving organic matter and chromaticity of treated water of processing epochally using organic coagulant informed positive ion co-polymerization superior in color wastewater through this research.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.18-24
• /
• 2000

To evaluate the efficiency of various cationic starches in improving retention drainage and strength properties of newsprints which are being made using extensive amount of domestic recycled wastepapers in a highly closed papermaking system diverse cationic starches have been prepared and tested. In the case of cationic starches with low charge density as the degree of substitution increas-es fines retention increased. Results also showed that the retention efficiency decreased sub-stantially for cationic starches with low DS when the conductivity of white water inceased. Tensile strength increased with the addition of cationic starches and then decreased. On the other hand internal bonding strength increased linearly with the addition of cationic starch. Oxidizing treatment of cationic starch was detrimental for retention and freeness improve-ment. Also crosslinking treatment of wet processed cationic starches made cationic starches less effective in retention and drainage.

• 한국산업융합학회 논문집
• /
• 제11권3호
• /
• pp.107-111
• /
• 2008

Usually, flow mediation earth and settling pond etc. of processing plant to handle water or wastewater. Mediation is the wastewater that flowed past settling pond than material of heavy particles, water weight colloid particles that big solids are removed but are suspensibility material settlement exclusion impossible. So, we need flocculation and coagulation action to remove materials from this colloid state. Flocculation and coagulation by addition of chemical agents forms floc settle size. That is, shorten the sedimentation time and quality of processing water because promoting sedimentation doing to do fines or suspended solids and colloid can materials large size and also, flocculation to annex efficiency of filtration augment. Therefore, I executed this research to prove that COD efficiency for wastewater by using inorganic coagulant.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.95-105
• /
• 1999

When superplasticizer is added to manufacture flowing concrete, the base concrete usually needs the adjustment to assure the sufficient fines contained to obtain flowable consistency without excessive bleeding or segregation. However, this may not only increase the cost, but also cause inconvenience in producing the base concrete. In this paper, the experiments are performed on normal base concrete to achieve a segregation-reducing flowing concrete by adding superplasticizer mixed with viscosity agents and AE admixtures. Three kinds of superplasticizer and two kinds of viscosity agent are selected. According to the results, with regard to the performance and cost of the admixtures, melamine type superplasticizer combined with the PEO viscosity agent and AE admixtures at the ratio 1:0.28:0.001 can acquire good quality and reduce the cost in producing the flowing concrete. With proper addition of combined superplasticizer, even though water to cement ratios of the base concrete are different, the segregation-reducing flowing concrete could be also achieved without reproportioning of the base concrete. However, it would be more desirable if the superplasticizer could be adjusted, before it is put into the practical use in order not to cause some other problems, such as rapid rate of slump loss and retarding of setting time.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.91-98
• /
• 2016

Linerboards have been produced by recycling recovered paper such as old corrugated containers(OCC). Usually linerboards produced during summer season show weak strength compared with those of produced during winter. In order to cope with the weak strength of linerboards produced during summer, and to confirm uniform quality, it is important to understand the seasonal effect on strength properties. Effect of pulping temperature of the OCC for linearboard production was investigated by controlling pulping temperatures at $18^{\circ}C$ and $51^{\circ}C$. Low pulping temperature ($18^{\circ}C$) caused more generation of fines in stock. Consequently retention and drainage of linerboard defibrated at high pulping temperature ($51^{\circ}C$) were better than those of $18^{\circ}C$. Strength properties of handsheet at low pulping temperature were higher than those of high pulping temperature and it could be confirmed that low pulping temperature during winter is one reason of seasonal variation of recycled linerboard strength. It is considered that surface modification of OCC fibers by harsh pulping action during winter caused increase of paper strength.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.82-90
• /
• 2009

It is very important to utilize effectively fibrous waste paper in terms of cost savings, environmental effects, and governmental policies. The quality of final products and runnability of papermaking process are primarily affected by constitutions of fibrous raw materials. In specific, board grade paper depends directly on compositions of waste paper bales. At present, the raw materials of board grade paper are mainly derived from lots kinds of wastepaper. Some papermaking countries, like EU, USA and Japan have advanced classification and management systems of recycled fiber, but Korea has not yet organized systematically. In this study, evaluation of wastepaper bale compositions and their fiber properties were carried out for effective utilization of fibrous raw materials for board grade paper production. 3 kinds of wastepaper bales were classified to fibrous or non-fibrous materials. In case of fibrous materials, KOCC, kraft sack paper and white duplex board matters were main component in total weight basis, and in case of non-fibrous materials, vinyl, plastic and cloth matters were main component, in turns. 3 representative kinds of waste paper were disintegrated and classified, and then prepared to handsheet for evaluation of recycled fiber property. Consequently, fines and ash content of waste paper, isolated from KOCC and white duplex board were higher than that of kraft sack paper. pH values of all kinds of waste fibers were neutral or weak alkaline.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1192-1201
• /
• 2009

The ground work with of the research is constructed by a SCP method to improve clay ground in the sedimentary layer and sand ground in the reclamation layer at the same time as a reclaimed soft ground by reclaiming deep depth. Improved fine-grained soils in the sand ground decrease the ground improvement effect and have an influence on replacement ratio of SCP method. Fine-Grained soils which advances in sand ground reduces a from improvement effect, Makes affect in replacement ratio of SCP method. In this study, consideration about replacement ratio of sand ground, Tried to observe affects in replacement ratio of fine-grained soils SCP method of dredging reclamation ground. The result, replacement ratio which follows in the Japan Geotechnical Society experience-chart(1988) recording where fine-grained soils content will increase feebly, was visible the aspect which increases progressively, replacement ratio in compliance with Gibbs and Holts(1973) methods according to fine-grained soils increase is visible the tendency which decreases gradually with the enemy. Specially, according to case fine-grained content of Mizuno(1987) methods increases, replacement ratio suddenly was showing the trend which rises from of 50% and according to fine-grained soils increase was overestimated.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.69-76
• /
• 2012

The bamboo fibers from three Korean bamboo species, Moso, Henon and Timber bamboo, were prepared by disintegration after thermal treatment. The samples were prepared according to the age of growth; bamboo shoots, 20 days and 50 days of growth. The fiber quality was also investigated by morphological and chemical analyses. There was no big difference in the dry mass of fibers among the three bamboo species. However, the dry mass of fibers from 50 days of growth was increased by 34%, whereas it was ranged in 9-20% in the case of fibers from bamboo shoots and 20 days of growth. In the results of morphological analysis, the fibers could be classified as the fibers from metaxylem, the fibers from parenchyma and the fines produced during disintegration. The fibers from 50 days of growth were separated from metaxylem, whereas the fibers from bamboo shoots and 20 days of growth were mainly consisted of fibers from metaxylem and parenchyma. The chemical analysis of fibers showed that the contents of carbohydrates, lignin and extractives were not much affected by thermal treatment.