• Laser Solutions
• /
• v.2 no.1
• /
• pp.38-42
• /
• 1999

As very large scale integration technology has been developed, much more accurate, reliable technology is needed for outer lead bonding. Laser soldering has been researched as an alternative for fine pitch device bonding. This study is focused on how to select optimal laser soldering variables with which solder wets parent material, the microstructural results of laser soldering and the reliability test One of popular packages, QFP100 was soldered successfully with two kinds of solder. The inspection of the joint for reliability was carried out by optical microscope, SEM, EDAX and pull test, which demonstrated the superiority of laser soldering.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.2
• /
• pp.21-26
• /
• 1998

대용량, 고속데이터 처리가 요구되는 System 개발은 이들의 복잡하고 고기능의 회 로 구현이 가능하냐에 달려 있고 또한 이들고기능 요구를 가장 잘 만족할수 있는 패키지는 MCM 이라 할 수있다. 시스템의 고속화, 소형화는 회로의 복잡성을 요구하는 있는 이를 패 키지로 구현하는 MCM은 시험성 확보에 심각한 문제점으로 나타나고 있다. 본 논문에서는 고밀도 구조의 MCM 기판에 대한 Interconnetion Line 시험검증을 위한 Flying Prober의 적 용 및 모듈 패키징 공정에 대한 조립성 검증을 위한 BST에 대해 설명한다. 연구에 사용된 MCM 모듈은 MCM-D 공정으로 제작되었으며 31um 신호선폭, 50um Via Hole Dia. 5신호 선층 5절연층 및 455 Net의 기판으로절연층은 Dow chemical의 BCB-4024/4026을 적용하였 다. 조립은 3 ASIC, 24소자 실장 및 2000 Wire Bonding으로 이루어지며 패키지는 방열특성 을 고려한 BGA(491 I /O,50mil pitch)를 개발하여 사용하였다. MCM 기판의미세패턴으로 구성된 Interconnection Line에 대해 Fine Ptich Probing이 가능한 Flying Prober를 사용하 여 평가하였으며 BST를 이용하여 실장소자의 KGD평가 및 능동, 수동소자가 실장된 MCM Package의 조립시험성을 확보할수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.572-573
• /
• 2010

Vibration analysis of Fine-pitch Ball Grid Array (FBGA) packages mounted on a Printed Circuit Board (PCB) subjected to harmonic excitation is performed by using finite element method (FEM). A finite element model of a memory module is composed of three main parts, packages, simplified solder balls and bare PCB. At first, natural frequencies and mode shapes of the developed model were confirmed experimentally. Secondly, the harmonic excitation experiment for the module was carried out at the first natural frequency of the memory module, and it was verified with the simulation by using mode superposition method at a constant acceleration.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.09a
• /
• pp.183-192
• /
• 2001

1- Buildup PCB technology is utilized to a bare chip attach substrate technology for packaging of semiconductor chip 2- Requirement for the substrate design rule is described in SIA International Technology Roadmap for Semiconductor. 3- There are seven fabrication methods of build-up technology. 4- Coating and lamination for resin and photo, and laser for micro via hope processes are available. Below $50\mu\textrm{m}$ in diameter is possible. 5- Fine pitch lines down to $30\mu\textrm{m}$ can be achieved by pattern plating with better electrical property. 6- Dielectric loss reduction is a key material improvement item for next generation build-up technology. 7- High band width up to 512 GB/s is possible with current wiring groundrule.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.72-75
• /
• 2003

솔더의 상호확산을 이용한 저온 칩 접합을 구현하기 위하여 $117^{\circ}C$의 공정 온도를 가지는 In과 Sn 솔더패드를 $25\;mm^2$의 접합면적에 형성하고 두 솔더의 융점 보다 낮은 온도인 $120^{\circ}C$에서 접합을 시행하였다. 30초의 반응시간에서도 접합이 이루어 졌으며 반응시간이 지남에 따라 두 솔더가 반응하여 혼합상을 형성하였다. 솔더패드 접합에서 접합부는 낮은 접속저항과 높은 접속강도를 가짐을 확인할 수 있었다. $40\;{\mu}m$의 극미세피치의 In, Sn 솔더 범프를 형성하여 접합부를 형성하였으며 daisy chain을 형성한 접합부를 이용하여 평균 $65\;m\Omega/bump$ 저항값을 얻을 수 있었다. 상온에서 시효후 $54\%$의 접속저항이 감소함을 확인할 수 있었다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.106-109
• /
• 2003

With the variation of Ag concentration in bath, current density, additive and agitation for electroplating of Sn-Ag solder, the compositions and the morphologies of solder were studied. It was possible to control Ag content in Sn-Ag solder by varying Ag concentration in bath and current density The microstructure size of Sn-Ag solder decreased with increasing current density. Duty cycle of pulse electroplating and quantity of additive affected on Ag content of deposit and surface roughness. In this work eutectic Sn-Ag solder bumps with fine pitch of 30m and height of 15m was formed successfully. The Ag content of electrodeposited solder was confirmed by EDS and WDS analyses and the surface morphologies was analyzed by SEM and 3D surface analyzer.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.873-878
• /
• 2000

Semiconductor packaging technology is changed rapidly according to the trends of the micro miniaturization of multimedia and information equipment. For I/O limitation and fine pitch limitation, DIP and SOP/QFP are replaced by BGA/CSP. This is one of the surface mount technology(SMT). Solder ball is bumped n the die pad and connected onto mounting board. In ball bump formation, vacuum suction type ball alignment process is widely used, However this type has some problems such as ionization, static electricity and difficulty of fifo(first-input first-out) of solder balls. Seesaw type is reducing these problems and has a structural simplicity and economic efficiency. Ball cartridge velocity and ball aligned plate angle are Important variables to improve the ball alignment Process. In this paper, seesaw-type CSP solder ball loader is developed and the optimal velocity and plate angle are proposed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.160-164
• /
• 2014

Recently, there has been an active study about friction force of moving parts for automotive. This study is development and evaluation of oil pockets for journal bearing and tappet valve for range extended electric vehicle. Specially, oil pockets are effect on friction force depend on pitch, size, depth. In this study, fine oil pocket was formed using by etched texturing on the journal bearing and tappet valve. And oil pocket analyzed by SEM and friction force test was carried out by tensile tester. Finally, in this study, it was suggested by round and plane part which journal besring and tappet valve.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.137-145
• /
• 2005

A new design of contact detection algorithm is proposed for the z-axis of a wire bonder that interconnects between pads and leads in semiconductor manufacturing processes. Fast and stable contact detection of the z-axis is extremely important fer maintaining proper quality in the fine pitch gold wire bonding process, which has a small pad size of below 70um. The new method is based on a statistical approach and designed for the discrete Kalman filter. Real wire bonding experimental results are presented to demonstrate the advantages of the proposed algorithm.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.158-158
• /
• 2015

전해동박(Electrodeposited Copper Foil)은 전기도금 공정으로 제조되는 얇은 구리 포일로서, 주로 TV, PC, 스마트폰 등 전자제품의 인쇄회로기판에서 전기신호를 전달하는 회로소재로 사용이 되며, 최근에는 모바일 IT, 전기자동차, 지능형 로봇, 그린 에너지 산업 등에서 필수적으로 적용되는 소재로 이용이 급증하고 있는 핵심소재이다. 모바일, Network 고속 통신 기술의 발전에 따라 Data 사용량의 폭증으로 고속/고주파 신호전송이 필요성이 증대되고 있으며 무선 충전 기술의 도입 및 웨어러블 기기의 보급으로 점차 FCCL도 3layer에서 2layer로 점차 그 수요가 바뀌어 가고 있다. 이에 따라 전해동박도 고속/고주파 신호 전송 및 고밀도 특성에 맞추어 저조도, 고밀착력 특성을 요구되는 방향으로 개발 되고 있으며 Line Space 가 기존 $25{\mu}m/25{\mu}m$ 패턴에서 $20{\mu}m/20{\mu}m$ 패턴으로 Fine pitch를 요구함에 따라 전해동박의 박막화, 저조도 고 밀착력 특성이 더 요구되고 있다.