• 제목/요약/키워드: fine line

검색결과 459건 처리시간 0.032초

시변 가변차단주파수 저역통과필터를 이용한 심전도 고주파 잡음의 제거 (High Frequency Noise Reduction in ECG using a Time-Varying Variable Cutoff Frequency Lowpass Filter)

  • 최안식;우응제;박승훈;윤영로
    • 대한의용생체공학회:의공학회지
    • /
    • 제25권2호
    • /
    • pp.137-144
    • /
    • 2004
  • 심전도 신호에는 근 잡음과 전원잡음 둥의 잡음이 섞이는 경우가 많다. 이러한 잡음들은 심전도 신호의 주요 주파수 성분에 비하여 상대적으로 고주파 성분이지만 전체적으로 보면 주파수 스펙트럼이 중첩된다. 본 논문에서는 연속적으로 변하는 차단주파수를 가지는 시변 저역통과 디지털필터를 이용하여 원신호의 왜곡을 최소화하면서 잡음을 제거하는 신호처리 방법에 대하여 기술한다 이 필터는 차단주파수 제어기와 가변차단주파수 저역통과필터로 구성된다. 차단주파수 제어기는 잡음이 포함된 심전도 신호로부터 신호의 기울기를 이용하여 차단주파수 제어 신호를 생성한다. 가변차단주파수 저역통과필터의 구현을 위해서 본 논문에서는 컨벡스 조합 필터와 계수보간 필터로 불리는 새로운 두 가지 필터 설계방법을 제안하였으며, 이 두 가지 방법을 이용함으로써 저역통과필터의 차단주파수를 임의의 제한된 구간에서 연속적으로 변화시키는 것이 가능하였다. 고주파 잡음이 첨가된 심전도 신호에서 가변차단주파수 저역통과필터의 잡음 제거 능력이 우수함을 보였으며, 본 논문에서 제안된 가변차단주파수 저역퉁과필터는 심전도 신호의 전처리에 유용하게 사용되어질 것으로 판단된다. 특히, 제어된 환경이 아닌 일상생활 환경에서 심전도를 측정하는 재택건강관리 시스템에서 신호의 품질을 개선하는 데에 효과가 있을 것으로 기대한다.

게르마늄 Prearmophization 이온주입을 이용한 티타늄 salicide 접합부 특성 개선 (Effects of the Ge Prearmophization Ion Implantation on Titanium Salicide Junctions)

  • 김삼동;이성대;이진구;황인석;박대규
    • 한국재료학회지
    • /
    • 제10권12호
    • /
    • pp.812-818
    • /
    • 2000
  • 본 연구에서는 Ge PAM이 선폭 미세화에 따른 C54 실리사이드화 및 실제 CMOS 트랜지스터 접합부에서의 각종 전기적 특성에 미치는 영향을, As PAM과의 비교를 통하여 관찰하였다. 평판 상에서 각 PAM 및 기판의 도핑 상태에 따른 Rs의 변화량을 측정하였으며, 각 PAM 방식은 기존의 살리사이드 TiSi$_2$에 비해 개선된 C54 형성 효과를 보였다. 특히, Ge PAM은 n+ 기판에서 As PAM보다 효과적인 실리사이드화를 보였고, 이 경우 XRB 상에서도 가장 강한 (040) C54 배향성을 나타내었다. ~0.25$\mu\textrm{m}$ 선폭 및 n+ 접합층에서 기존 방식에 비해 As과 Ge PAM은 각각 ~85,66%의 개선된 바저항을 보였으며, P+ 접합층에서는 As과 Ge PAM 모두 62~63% 정도의 유사한 Rs 개선 효과를 보였다. 콘택 저항에서도 각 콘택 크기 별로 바저항(bar resistance) 개선과 같은 경향의 PAM 효과를 관찰하였으며, 모든 경우 10 $\Omega$/ct. 이하로 양호한 결과를 보였다. 누설 전류는 area 형 패턴에서는 모든 공정 조건에서 <10E-14A/$\mu\textrm{m}^{2}$ 이하로, edge 형에서는 특히 P+ 접합부에서 As 또는 Ge PAM 적용 시 <10E-13 A/$\mu\textrm{m}^{2}$ 이하로 다소 누설 전류를 안정화시키는 결과를 보였다. 이러한 결과는 XTEM에 의해 관찰된 바 Ge PAM 적용 시 기존의 경우에 (PAM 적용 안한 경우) 비해 유사한 평활도의 TiSi$_2$박막 형상과 일치하였으며, 또한 본 실험의 Ge PAM 이온주입 조건이 접합층에 손상을 주지 않는 범위에서 적정화되었음을 제시하였다

  • PDF

익산 미륵사지 출토 동종의 금속학적 연구 (Metallurgical study of bronze bells excavated from the Miruksa (temple) site in Iksan)

  • 조남철;허일권;강형태
    • 보존과학연구
    • /
    • 통권27호
    • /
    • pp.5-22
    • /
    • 2006
  • Mireuksa is a temple that was established in the Baekjea Period and continued around to the 16thcentury. The sites of the temple throughout diverse periods such as the United Shilla Period, KoryuPeriod, and Chosun Period including the one of the early temple in the late Baekjea Period were discovered. In those temple sites, there were lots of diverse artifacts discovered including artifacts in the Bronze Age. In this study, the compositions of four bronze bells excavated from Mireuksa site in Iksan were analyzed and the manufacturing technique of bronze bells was studied through the observation of microstructure. Also, the analytical cases of ancient bronze bells were collected and compared. Furthermore, the provenance study of the bronze bells site was attempted with the Pbisotope ratio. The results aim to offer crucial keys for discovering the aspect of society as well as information about the origin, development, and the route of propagation of ancient technologies. Bronze bell No. 1 showed an unexpected composition as Cu was found 98.5% in it. There were shown twins which were created by annealing and an even phase in the fine grains. It was also shown that bronze bell No. 2 and 4 had a high content of Pb although they showed a similar composition with general bronze bells in terms of Sn content. As shown in the analysis characteristics table of Korean bronze bell of this study, the ancient bronze bell used Pb of which content was limited to 2.12% in general, however, the results showed 15.5% and 13.2% respectively, which is an excessive amount. Asa result of analyzing inclusion in the microstructure of bronze bell No. 2, it was found that sulfide group mineral was used since there appeared S(14.55%). Also, it was proven that $CuFeS_2$ or$Cu_5FeS_4$ was used as a raw material because there was a small amount of Fe. As a result of analyzing inclusion of bronze bell No. 4, the bronze bell sample contained S(13.43%) and it is thought that sulfide group mineral was used, however, it had no Fe. Therefore, it is not connected to $CuFeS_2$ which is the main mineral of Korea. In addition, a strain line was shown with processing in bronze bell No. 2 and 4. As a result of provenance study of bronze bell No. 2 and 4 using the Pb isotope ratio, they or their raw materials are estimated to come from the southern China. Bronze bell No. 3 showed only Cu and Sn, and it is featured with a relatively low amount of Sn(6.63%). The microstructure has only phase, andintergranular corrosion was highly in progress.

  • PDF

Galileo BOC(1,1)에서 이른 상관시간 옵셋 영역의 상관 값을 이용한 추적기법 (A Tracking Scheme using Correlation Value at Advanced Offset Range in Galileo BOC(1,1) Signal)

  • 유승수;김상훈;윤석호;송익호;김준태;김선용
    • 한국통신학회논문지
    • /
    • 제33권1C호
    • /
    • pp.86-93
    • /
    • 2008
  • Galileo 시스템은 통신 물리계층으로 직접수열/대역확산(direct sequence/spread spectrum, DS/SS) 시스템을 사용한다. DS/SS 시스템은 수신신호로부터 정보를 복원하기 위해 수신신호의 확산신호와 수신기에서 발생한 확산신호의 동기를 정확하게 결정하고, 유지해야 한다. 이를 위해 DS/SS 시스템은 획득과 추적 단계를 수행해 동기를 맞춘다. 이상적인 환경에서 최적 부호추적기는 EL-DLL이다(delay lock loop with early minus late discriminator). EL-DLL은 정확한 동기시점을 기준으로 확산신호의 상관함수가 정확히 대칭인 특징을 이용해 추적을 수행한다. 그러나 다중경로 신호가 수신되었을 때 상관함수의 대칭성이 왜곡되며, 이로 인해 추적이 완료되어 동기시점을 결정한 후에도 일정한 동기오차가 존재한다. 이처럼 추적기가 동기시점을 결정한 후에도 잔존하는 동기오차를 추적편이라 한다. 이상적인 환경에서 Galileo BOC(1,1) 신호로 변조된 확산신호는 정확한 동기시점에서 최고 값이 나타나며, 이 시점을 기준으로 반 칩(chip) 이른 상관시간 옵셋과 늦은 상관시간 옵셋에서 극소 값을 갖는다. 이때 다중경로신호는 항상 가시신호에 비해 늦게 수신되기 때문에 정확한 동기시점을 기준으로 반 칩 이른 상관 시간 옵셋 주변의 상관 값은 다중경로신호에 의해 크게 왜곡되지 않는 특징을 갖는다. 본 논문은 이 특징을 바탕으로 Galileo BOC(1,1)에 알맞은 추적편이 완화기법을 제안하고, 기존 기법과 제안한 기법의 추적편이 특성을 분석한다.

지연다짐이 Soil-Cement의 압축강도에 미치는 영향 (The Effect of Delayed Compaction on Unconfined Compressive Strength of Soil-Cement Mixtures)

  • 정일웅;김문기;도덕현
    • 한국농공학회지
    • /
    • 제28권4호
    • /
    • pp.66-76
    • /
    • 1986
  • This study was attempted to investigate the effects of delayed compaction on the unconfined compressive strengh and dry density of Soil-cement mixtures. Soil-cement construction is a time-consuming procedure. Time-delay is known as a detrimental factor to lower the quality of soil-cement layer. A laboratory test was performed using coarse and fine weathered granite soils. The soils were mixed with 7% cement at optimum moisture content and excess moisture content in part. Socondary additives such as lime, gypsum-plaster, flyash and sugar were tried to counteract the detri-mental effect of delayed compaction. The specimens were compacted by Harvard Miniature Compaction Apparatus at 0,1,2,4,6 hors after mixing. Two kinds of compactive efforts(9 kgf and 18 kgf tamper) were applied. The results were summarized as follows: 1.With the increase of time delay, the decrease rate of dry density of the specimen compacted by 9 kgf tamper was steeper than that of the specimen compacted by 18kgf tamper. In the same manner, soil-B had steeper decreasing rate of dry density than soil-A. 2.Based on the results of delayed compaction tests, the dry density and unconfined compressive sterngth were rapidly decreased in the early 2 hours delay, while those were slowly decreased during the time delay of 2 to 6 hours. 3.The dry density and unconfined compressive strength were increased by addition of 3% excess water to the optimum moisture content during the time delay of 2 to 6 hours. 4.Without time delay in compaction, the dry densities of soil-A were increased by adding secondary additives such as lime, gypsum-plaster, flyash and sugar, on the other hand, those of soil-B were decreased except for the case of sugar. 5.The use of secondary additives like lime, gypsum-plaster, flyash and sugar could reduce the decrease of unconfined compressive strength due to delayed compaction. Among them, lime was the most effective. 6.From the above mentioned results, several recommendations could be suggested in order to compensate for losses of unconfined compressive strenght and densit v due to delayed compaction. They are a) to use coarse-grained granite soil rather than fined-grained one, b) to add about 3% excess compaction moisture content, c) to increase compactive effort to a certain degree, and d) to use secondary additives like line gypsum-plaster, flyash, and sugar in proper quantity depending on the soil types.

  • PDF

경주분지의 고지형과 대릉원 일원 신라고분의 입지 (Paleotopography of the Gyeongju Basin and the location of the Silla Tombs of Daerungwon)

  • 심현철
    • 헤리티지:역사와 과학
    • /
    • 제51권4호
    • /
    • pp.234-253
    • /
    • 2018
  • 경주분지 내에는 신라 지배층의 핵심묘역인 중심지고분군(소위 월성북고분군)이 있다. 대체로 평지로 알려진 이 일대 고분의 입지를 정확히 파악하는 것은 고분군의 조영과정과 방향 등을 이해하는 단서가 된다. 이를 위해서는 고분군이 위치한 곳을 포함한 주변일대의 지형양상을 정확히 이해할 필요가 있다. 즉, 고분군이 위치한 경주 분지 내의 고지형을 최대한 복원할 수 있어야 한다. 따라서 조선 후기 고지도, 일제강점기 지적원도, 각종 지형도, 1950~60년대 항공사진 등 가능한 한 모든 자료를 분석하여 고분군 조영당시의 지형양상을 파악하고자 하였다. 그 결과, 고분군이 위치하는 곳은 선상지의 선앙 말단부나 선단부에 해당하며, 이 일대에는 다수의 용천천과 습지가 분포하는 것을 확인하였다. 용천천과 습지로 이뤄진 곳은 상대적으로 저지대에 해당하며, 지표면에 수분이 많아 고분을 조성하기에는 부적합한 지대이다. 이러한 지형특성은 고분군의 분포양상과 직접 관련되며, 고분은 용천천과 습지를 완벽히 피해 조성된 것을 알 수 있었다. 한편, 고분군은 용천천과 습지에 의해 몇 개의 구역으로 구분 되며, 각 구역 내에서도 경계부분의 돌출되고 독립된 곳에는 대형분들이 입지하는 특징을 가진다. 또한, 이러한 양상은 남천변의 오릉일대에도 그대로 적용되는 것을 알 수 있었다. 결국, 대릉원 일원에 위치하는 신라고분의 입지와 분포양상은 경주분지 내의 미세한 지형특성이 그대로 반영된 결과이며, 그 핵심요인은 바로 용천천과 습지이다.

LPG 자동차의 긴급차단밸브 기상필터막힘, 솔레노이드밸브 조립부손상, LPG 스위치 커넥터 핀 접촉불량에 관련된 고장사례 연구 (Study for Failure Examples Including with Gas filter Clogging of Emergency Cutting Valve, Assemblying Part Damage of Solenoid Valve, Contact Damage of LPG Switch Connector Fin in a LPG Car)

  • 이일권;국창호;함성훈;김지현;김성모;정동화;유창배;문학훈;이정호
    • 한국가스학회지
    • /
    • 제26권1호
    • /
    • pp.1-6
    • /
    • 2022
  • 이 논문은 LPG 자동차 엔진의 시동불량현상을 조사하고 분석한 연구이다. 첫 번째 사례는 긴급차단 밸브를 점검한 결과 밸브의 기상측에 미세한 이물질에 의해 필터 막힘으로 인해 연료공급이 안 되는 현상을 확인하였다. 두 번째 사례는 액·기상 솔레노이드 밸브의 초기 작동시 연료의 누설에 영향이 없었으나, 시간이 지나면서 솔레노이드 조립부의 손상부가 내구성이 떨어져 LPG 가스의 누설이 진행되어 연소실로 공급되는 연료의 공급이 제대로 되지 않아 자동차의 시동꺼짐 현상이 발생된 것을 확인하였다. 세 번째 사례는 EGR 10A 퓨즈와 LPG 스위치 사이의 커넥터 핀이 장력불량에 의한 접촉불량으로 과열이 발생되어 소손된 것을 확인하였다. 따라서, 자동차의 시동성에 대단히 예민한 전기적인 문제가 발생하지 않도록 자동차의 관련시스템을 사전에 철저하게 점검하고 이를 관리하여야 할 것으로 판단된다.

On the "Virtual and Real" and Blankness in Chinese Landscape Painting

  • Dongqi, Liu
    • International Journal of Advanced Culture Technology
    • /
    • 제10권3호
    • /
    • pp.174-183
    • /
    • 2022
  • The abstract should summarize the contents of the paper and written below the author information. Use the word "Abstract" as the title, in 12-point Times New Roman, boldface type, italicized, centered relative to the column, initially capitalized, fixed-spacing at 13 pt., 12 pt. spacing before the text and 6 pt. after. The abstract content is to be in 11-point, italicized, single spaced type. Leave one blank line after the abstract, and then begin the keywords. All manuscripts must be in English. When it comes to the issue of "virtual and real" in traditional Chinese painting, the first impression is to describe the problems of painting strokes and ink, layout of pictures, etc., but it runs through the initial conception of the work, creation in the middle and aesthetic appreciation of the work. It exists in the whole process of artistic creation and appreciation. In essence, it is a problem of aesthetic thinking and philosophical thinking. Because the traditional Chinese painting theory is influenced by Taoism, when the concept of "virtual and real" is implemented in the specific picture of Chinese painting, it is contained in the specific shape of "physics", that is, the painting theory research of "blank space" in the picture. Based on the traditional Taoist philosophy of China, this paper takes the "virtual and real" view in Lao Zhuang's thought as the research object, deeply analyzes and compares its relationship with the "virtual and real" in Chinese landscape painting, and finds out their artistic spirit, essential characteristics and how to present them. This paper mainly discusses the internal relationship between Taoist philosophy and "virtual and real" in Chinese landscape painting from the following aspects. The introduction expounds the origin, purpose, significance, innovation and research methods of the topic. This paper analyzes the philosophical thoughts about landscape in the philosophical thoughts represented by Lao Tzu and Zhuangzi. The development of Chinese traditional aesthetics theory is closely related to Taoist philosophy, which has laid the foundation and pointed out the direction for the development of Chinese painting theory since ancient times. It also discusses the influence of the Taoist philosophy of "the combination of the virtual and real" on the emergence and development of the artistic conception of landscape painting. Firstly, through the analysis of the artistic conception of landscape painting and its constituent factors, it is pointed out that the artistic conception is affected by the personality and the painting artistic conception. Secondly, through the Taoist thought of "the combination of the virtual and real" in landscape painting, so as to reflect that it is the source of the artistic conception of Chinese landscape painting. It is the unique spiritual concept of "Yin and Yang" and "virtual and real" that creates the unique "blank space" aesthetic realm of Chinese painting in the composition of the picture. Finally, it focuses on the "nothingness" in Taoist philosophy and the "blank space" in Chinese landscape painting. The connotation of the "blank space" in Chinese painting exceeds its own expressive significance, which makes the picture form the aesthetic principle of emotional blending, virtual and real combination and dynamic and static integration. Through the "blank space", it deepens the artistic characteristics of the picture and sublimates the expression of "form" in Chinese painting.

신재생에너지 보조금 지급에 관한 법적쟁점 고찰 (A Study on the Legal Issues on the Payment of Renewable Energy Subsidies)

  • 박지은;이양기
    • 무역학회지
    • /
    • 제43권4호
    • /
    • pp.111-130
    • /
    • 2018
  • 온실가스 배출로 인한 지구온난화에 대응하고 지구의 평균 기온상승을 방지하기 위하여 2015년 12월 파리기후협정(Paris Agreement)이 채택되어 신기후체제가 도래하게 되었다. 해수면상승과 삼림고갈, 미세먼지 등과 같은 기후변화로 인한 환경문제에 대응하기 위하여, 신재생에너지의 중요성이 높아졌다. 신재생 에너지의 성장을 위해서는 현실적으로 정부의 지원이 필요하다. 그러나 신재생에너지 산업에 대한 각국 정부의 과다한 지원은 공정 한 경쟁을 저해하고 비용을 높인다는 점에서 문제가 될 수 있으며, 이미 WTO에서도 신재생에너지 보조금과 관련된 제소사례를 찾아볼 수 있다. 본 연구는 WTO의 보조금 및 상계조치 협정과 GATT를 중심으로 하였다. 신재생에너지 보조금에 관련된 WTO 분쟁사례를 살펴보고, 사례에서 쟁점이 되는 조항인 보조금협정의 제2조 특정성과 제3조 (b)항 수입대체보조금, GATT 제20조 일반적 예외를 분석하였다. 기후변화에 대응하는 환경보호적인 관점에서 현재 각 국의 에너지 정책을 반영하고 신재생에너지 산업의 발전을 위하여 보조금협정의 개정 또는 보완이 필요하다. 본 연구에서는 보조금협정 제8조 허용보조금의 재도입 논의 또는 에너지보조금에 관한 특별규정과 같은 방안과 더불어 보조금협정 제3조의 명확한 해석기준이 필요하다고 보았다. 그러나 과도한 정부 보조금의 지급은 무역분쟁을 야기할 수 있으며 환경보호와 자유무역의 형평성, 지속가능한 개발이라는 WTO의 목적에 맞추어 WTO의 규범을 개선해야 한다.

  • PDF

조선시대 장보관(章甫冠)의 보존처리 (Conservation Treatment of Jangbogwan from the Joseon Dynasty)

  • 이혜린;박승원
    • 박물관보존과학
    • /
    • 제30권
    • /
    • pp.1-22
    • /
    • 2023
  • 본 연구는 국립중앙박물관 소장 포제 관모인 세마관의 보존처리 기록과 손상된 문화재의 원형 회복에 따른 기존 명칭 재고를 목적으로 하였다. 포제 관모는 홑으로 된 내관에 양이 있고 내관을 감싸는 홑으로 된 외관, 머리둘레를 두르는 겹으로 된 무가 내관과 외관을 결합하는 구조이다. 소색 마직물로 만든 조선시대 남자용 관모로 표면에 오염과 이물질 제거, 부분적으로 열화되어 손상된 직물의 수리를 통한 원형 회복과 안정화 및 전시 활용을 위해 보존처리를 실시하였다. 포제 관모의 바느질 방법은 손바느질과 재봉틀 바느질이 혼합되어 있다. 전체 구성과 양식은 조선시대 동일 유형의 관모와 유사하지만 재봉틀 바느질이 사용되었으므로 제작 시기는 1900년대 초반으로 보았다. 보존처리가 완료된 포제 관모의 전체적인 구성과 형태에 대해 유생들이 평상복을 입을 때 착용하는 남자 관모의 하나인 장보관과의 유사성을 발견하고 문헌의 기록과 도설, 선행연구, 조선시대 초상화에 보이는 장보관의 형태 비교, 현전 실물들과의 특징 비교를 통해 대상품인 포제 관모가 장보관으로 분류되어 명명되기에 적정하다고 판단하였다.