• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.2
• /
• pp.194-200
• /
• 2014

Skin ridge (SR) is a irregular line shape that stand out in epidermal layer on sweet potato (Ipomoea batatas Lam.). SR reduced marketable value of storage root in sweet potato. It would be occurred by accumulation of starch in epidermal layer. SR rate was more highly increased in early planting. SR rate was under 3% in 7 varieties 'Geonpoongmi', 'Yeonhwangmi', 'Geonmi' etc and the rate of two varieties 'Healthymi', 'Borami' were up to 30%. SR rate was positively correlated with vine weight. SR rate was the highest in 120 days after planting. As leaf area index was reduced to 3, 4, 5 and 6 (non-topping) by topping, it was hard to fine SR occurrence in topping treated sweet potato. Topping treatment, however, caused decrease in yield overall. Therefore, topping treatment for decreasing of SR was not recommended in agricultural practice of sweet potato.

• 한국해양학회지
• /
• v.25 no.2
• /
• pp.74-83
• /
• 1990

The similarity in Mesozoic geology between the Antarctic Peninsula and South America indicates the possibility that they had situated along the same tectonics line before the separation of southwestern Gondwanaland. The igneous activity around the Antarctic Peninsula, including the South Shetland islands, can be correlated with the South American Cordillera Orogeny due to the subduction of Farallon/Phoenix plate until late Mesozoic. However igneous activity in Tertiary correlates with the tectonics movement accompanying the formations of Drake passage and Scotian sea. The south Shetland islands form a Jurassic-Quaternary miasmatic island arc on the sialic basement of schist and deformed sedimentary rocks. Forming of the South Shetland Islands arc began during the latest Jurassic or earliest Cretaceous from the southwestern part of the archipelago. The igneous activity migrated northeasterly and continued in most areas until late Tertiary. The entire arc-forming period, between late Jurassic and late tertiary times, was characterized by emplacement and eruption of magmas of intermediate between island-arc tholeiite and calc-alkaline types. However, Quaternary volcanic rocks show strong alkaline affinities which corresponds to the switch from compressional to intra: plate tensional tectonics. The rocks of late Cretaceous to Tertiary, mainly found in King George Island, consist of lava of basalt to andesite and intercalated pyroclastic rocks. Some of the volcanic rocks, which ofter called quartz-pyrite lodes'are severely altered and include much content of calcite,silica and pyrite.The stratographic succession of King George Island can be divided into two formation:Fields formation and Hennequin formation.The Fildes formation crops out at the west side of Admiralty Bay n King George Island,while the Hennequin formation at the east side of the bay.These two formtions are thought to be formed contempiranceously.The Fildes formation consists of altered olivine-basalt and basaltic andestie, whereas the Hennequin formation consists of fine-grained hypersthene-augite-andesite.Both formations interclate pyroclastic rocks.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.269-275
• /
• 2005

We analyzed the unit cell performance against the cathode porosity, which is supposed to be closely related with active sites for the cathode reaction. In order to fabricate the unit cells with different porosity in the cathode layer we changed the mixing ratio of fine and coarse LSCF cathode powders. The final porosity of each cathode layer was 14, 23, 27, $39\%$ respectively. According to the electrochemical analysis of unit cell performance via DC current interruption and AC impedance method, the electrodic polarization resistance was diminished as the cathode porosity increased. The decrease of polarization resistance was attributed due to the increase of active reaction sites and the enhancement of overall unit cell performance could be explained in the same line.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.5
• /
• pp.445-457
• /
• 2017

In this study, we developed an approach to better account for uncertainties in estimated contributions from fine particulate matter ($PM_{2.5}$) modeling. Our approach computes a Concentration Correction Factor (CCF) which is a ratio of observed concentrations to baseline model concentrations. We multiply modeled direct contribution estimates with CCF to obtain revised contributions. Overall, the modeling system showed reasonably good performance, correlation coefficient R of 0.82 and normalized mean bias of 2%, although the model underestimated some PM species concentrations. We also noticed that model biases vary seasonally. We compared contribution estimates of major source sectors before and after applying CCFs. We observed that different source sectors showed variable magnitudes of sensitivities to the CCF application. For example, the total primary $PM_{2.5}$ contribution was increased $2.4{\mu}g/m^3$ or 63% after the CCF application. Out of a $2.4{\mu}g/m^3$ increment, line sources and area source made up $1.3{\mu}g/m^3$ and $0.9{\mu}g/m^3$ which is 92% of the total contribution changes. We postulated two major reasons for variations in estimated contributions after the CCF application: (1) monthly variability of unadjusted contributions due to emission source characteristics and (2) physico-chemical differences in environmental conditions that emitted precursors undergo. Since emissions-to-$PM_{2.5}$ concentration conversion rate is an important piece of information to prioritize control strategy, we examined the effects of CCF application on the estimated conversion rates. We found that the application of CCFs can alter the rank of conversion efficiencies of source sectors. Finally, we discussed caveats of our current approach such as no consideration of ion neutralization which warrants further studies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.36-50
• /
• 2015

The purpose of this study is to assign emission source profiles of volatile organic compounds (VOCs) and particulate matters (PMs) for chemical speciation, and to correct the temporal allocation factor and the chemical speciation of source profiles according to the source classification code within the sparse matrix operator kernel emission system (SMOKE) in the Seoul metropolitan area. The chemical speciation from the source profiles of VOCs such as gasoline, diesel vapor, coating, dry cleaning and LPG include 12 and 34 species for the carbon bond IV (CBIV) chemical mechanism and the statewide air pollution research center 99 (SAPRC99) chemical mechanism, respectively. Also, the chemical speciation of PM2.5 such as soil, road dust, gasoline and diesel vehicles, industrial source, municipal incinerator, coal fired, power plant, biomass burning and marine was allocated to 5 species of fine PM, organic carbon, elementary carbon, $NO_3{^-}$, and $SO_4{^2-}$. In addition, temporal profiles for point and line sources were obtained by using the stack telemetry system (TMS) and hourly traffic flows in the Seoul metropolitan area for 2007. In particular, the temporal allocation factor for the ozone modeling at point sources was estimated based on $NO_X$ emission inventories of the stack TMS data.

• 한국해양학회지
• /
• v.29 no.3
• /
• pp.217-227
• /
• 1994

From northeast to southwest, discontinuous sand ridges distribute on the western continental shelf of Korean Peninsular. The dimension of sand ridges is 3 to 21 m high, 3.1 to 6.8 km wavelength and 9-64 km long with 0.5 steep slope. they are probably originated and reformed by the intensity of tidal current according to the sea level rise. The characteristics of sand ridges revealed in study area are summarized as follows: (1) The sand ridges line up with the long axes of the tidal current ellipses, indicating a tidal control. (2) these are composed of two sedimentary sequences on the 3.5 kHz seismic profiles and core sediments. The upper sequence characterized by prolonged type is covered with thin veneer of massive fine sand(Mz, 2-3$\phi$) with Olive Gray(5Y 5/2). The lower sequence is characterized by internal reflector type with parallel and discontinuous. It consists of sandy mud or muddy sand(Mz, 5-7$\phi$) with laminar structures. the parallel internal reflectors are truncated on the slope of sand ridges. (3) Asymmetrical sand waves are superimposed on the sand ridges, and facing to the crest. However, symmetrical sand waves lie on the crest. Sand ridges having characteristics above is originated by scouring of tidal current, covered with coarase relict sediments, and modified by sadware.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.362-366
• /
• 2011

The objective of this study was to compare the anticancer activity of glucosinolates against four different cancer cells; SNU-251, SNU-354, SNU-C4, MCF-7 and to determine the amounts of glucosinolates in mustard leaves. Green and red mustard leaves were cultivated on the field of Rural Development Administration from May to July, 2010. After the leaves were harvest and lypophilized, the fine powder was extracted with boiling 70% methanol(v/v) for the measurement of anticancer activity and then applied to the cancer cells obtained from Korean Cell Line Bank(KCLB). The anticancer activity of red leaf mustard was higher than that of green mustard leaf, particularly in SNU-251 for 24 hr and in SNU-C4 for 48 hr. In both green and red mustard leaf, sinigrin was the most abundant glucosinolte and was determined as 4.71 and 3.06 mg/g dry wt., respectively, but glucoiberin only presented 0.14 mg/g dry wt. with minor amounts.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.5-13
• /
• 2016

This research is focused on the seepage behavior of embankment which had the weak zone with big permeability. The distributed TDR (Time Domain Reflectometer) and point sensors such as settlement gauge, pore water pressuremeter, vertical total stressmeter, and FDR (Frequency Domain Reflectometer) sensor were used to measure the seepage characteristics and embankment behavior. Also, the measured data were compared to the data of 2-D and 3-D numerical analysis. The dimension of model embankment was 7 m length, 5 m width and 1.5 m height, which is composed of fine-grained sands and the water level of embankment was 1.3 m height. The seepage behavior of measuring and numerical analysis were very similar, it means that the proper sensing system can monitor the real-time safety of embankment. The result by 2-D and 3-D numerical analysis showed similar saturation processing, however in case of weak zone, the phreatic lines of 2-D showed faster movement than that of 3-D analysis, and finally they converged.

• Journal of the Korean Society of Costume
• /
• v.1
• /
• pp.101-117
• /
• 1977

This thesis is a study of the Simui(深衣) system which was a dress regulation peculiar to old China with skirt and coat. The origin of Simui is a very long time, that is, before Ju dynasty in China. Its wearing range had a large circle irrespective of rank and good or bad luck. This was a ordinary dress to the Emperor or the lords, a below court attire or a below sacrificial rites attire to the illustrious officials, and good luck dress to the common people. But this was a funeral rites attire or coming-of-age ceremony attire in domestic behaviour. In the times of Song dynasty, lots of confucian scholars had put on this simui because of Juhi's recommendation for domestic behaviour. This Simui had been put on through all the times of China and was the original text of all the dress. Especially the court attire and silkworm working dress of Empress, and the court attire and underwear court attire of Emperor is also made out of this Simui, therefore this is a origin of the ceremonial dress which formed into long coat. In Korea it is said that this Simui was brought in prior to the middle of Goryeo dynasty. But we can't tell the correct transmitted age. According to the following records in Goryeo History, "King had put on the Simui as a sacrificial rite attire in the times of Yejong". It is sure that this Simui was brought in prior to the times of Yejong. In fact, lots of confucian scholars had put on the Simui since the introduction of confucianism in the end of Goryeo dynasty and after that time this was taken by many confucian scholars through Yi dynasty. Korean Simui system was complied with Chinese system through confucian domestic behaviour, This was respected for court dress of confucian scholars, as it were, Chumri, (an ordinary dress of scholars), Nansam (a uniform of upper student), and Hakchangui (a uniform of confucian student). There are many deta about Simui system in the book of Yeki, chapter Okcho and Simui, and other many canfucian books. But we didn't demonstrate the theory about it till now. Especially there are diversifies of opinions about the phrase of "Sok Im Ku Byun" in Yeki. Simui was cut in separate and then was stitched together in one piece. Generally its shape had round sleeve and angled lapel, its length reaches to the anklebone. And it has a line around the lapel, the sleeve band, and the edge of skirt. It is called Simui because the body can be wrapped deeply in broad width and large sleeve. The Simui was made of white fine linen and was cut by the natural size of body. Every part of Simui had a profound meaning; the round sleeve in compliance with regulation can keep a courtesy when a walker moves his hands and the angled lapel like a carpenter's square in compliance with square keeps them front loosing their Justice and a string of the back also keeps them loosing from their righteousness and the flat lower part of Simui makes their heart and mind calm. This Simui was usually attendant on a head cover and belt made cloth, and black shoes. This thesis was made a study of documents and portrait from Yi dynasty, for the actual object was not obtained.