• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.8-8
• /
• 2003

Electron-phonon interaction plays a significant role in forming of colossal magnetoresistance effect (CMR). Polaron formation was observed by neutron diffraction and by extended X-ray absorption fine structure (EXAFS) analysis. Local probe as given by the EXAFS is a useful method to study the polaronic charge and its dependence on temperature and ions size. Here we present the EXAFS study of polaronic charge in La/sub 0.7/Ca/sub 0.3-X/Ba/sub X/MnO₃ compositions. The single phase La/sub 0.7/Ca/sub 0.3-X/Ba/sub X/MnO₃ manganites (x=0; 0.03; 0.06, ..., 0.3) were prepared by ceramic technology [1]. The Curie temperature was determined by extrapolation of the temperature dependence of the magnetization (down to zero magnetization). EXAFS experiments were carried out at the 7C EC beam line of the Pohang Light Source (PLS) in Korea. The atomic pair distribution functions (PDF) were obtained by re-regularization method [2] from filtered spectra. The PDF for the x=0.3 sample showed a single peak function and for x=0.0, 0.03, 0.06, 0.09, 0.12 compositions were asymmetric in agreement with a small Jahn-Teller elongation of two (short and long) bonds of the MnO/sub 6/ octahedron. Dispersion, σ/sub Min-O//sup 2/, and asymmetry, σ/sub Min-O//sup 3/, of the Mn-O bond distances varied significantly with x and showed a maximums at x=0.09. The maximum of σ/sub Min-O//sup 2/ is caused by increase of dynamic rms displacements of the Mn-O distances near the T/sub C/. The observed x dependence of σ/sub Min-O//sup 3/ reflects the reduction of charge carriers mobility at approaching to T/sub C/ from low as well as high temperatures.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.213-217
• /
• 2015

Recently, household electronic industries require environmentally-friendly and highly functional steels in order to enhance the quality of human life. Customers especially require both excellent corrosion and abrasion resistant anti-fingerprint steels for digital TV panels. Thus POSCO has developed new functional electro-galvanized steels, which have double coated layers with organic-inorganic composites on the zinc surface of the steel for usage as the bottom chassis panel of TVs. The inorganic solution for the bottom layer consists of inorganic phosphate, magnesium, and zirconium compounds with a small amount of epoxy binder, and affords both improved adhesion properties by chemical conversion reactions and corrosion resistance due to a self-healing effect. The composite solution for the top layer was prepared by fine dispersion of organic-inorganic ingredients that consist of a urethane modified polyacrylate polymer, hardener, silica sol and a titanium complex inhibitor in aqueous media. Both composite solutions were coated on the steel surface by using a roll coater and then cured through an induction furnace in the electro-galvanizing line. New anti-fingerprint steel was evaluated for quality performance through such procedures as the salt spray test for corrosion resistance, tribological test for abrasion resistance, and conductivity test for surface electric conductance regarding to both types of polymer resin and coating weight of composite solution. New composite coated anti-fingerprint steels afford both better corrosion resistance and abrasion properties compared to conventional anti-fingerprint steel that mainly consists of acrylate polymers. Detailed discussions of both composite solutions and experimental results suggest that urethane modifications of acrylate polymers of composite solutions play a key role in enhanced quality performances.

• 수산경영론집
• /
• 제47권3호
• /
• pp.53-69
• /
• 2016

The purpose of this study is to explore the ecosystem service and benefit indicators of natural seaweed beds. Ecosystems of natural seaweed beds provide a wide range of services and benefits to human society including provisioning services, regulating services, supporting services, and cultural services. Indicators for each of the ecosystem services are chosen by marine plants ecologists and as follows. Ecosystem indicators of natural seaweed beds for provisioning services are well-being food(amount of seaweed harvested/amount of fish landed, fish biomass, area of natural seaweed beds, the number of species, contribution to the second production), raw materials(amount of biomass by breed, amount of aquaculture feed), genetic resources(amount of genetic material extracted, amount of genetic material contained by age and habitat), and medicinal resources(amount of medicinal material extracted). Ecosystem indicators of natural seaweed beds for regulating services are air purification(amount of fine dust/NOx or $SO_2$ captured), climate regulation(amount of $CO_2$ sequestered), waste treatment(amount of N, P stored, biochemical degradation capacity COD), and costal erosion prevention(length and change of natural coast line, amount of sediment prevented). Ecosystem indicators of natural seaweed beds for supporting services are lifecycle and maintenance(primary production, contribution to the second production) and gene pool protection(amount of compositional factors in ecosystem, introduced species). Ecosystem indicators of natural seaweed beds for cultural services are recreation and tourism(the number of visits of an area) and information for cognitive development(amount of time spent in education, research and individual learning about ecosystem of natural seaweed beds).

• 천문학회지
• /
• 제41권2호
• /
• pp.39-47
• /
• 2008

Spectral line profiles of filaments/prominences to be observed by the Fast Imaging Solar Spectrograph (FISS) are studied. The main spectral lines of interests are $H{\alpha}$, Ca II 8542, and Ca II K. FISS has a high spectral resolving power of $2{\times}10^5$, and supports simultaneous dual-band recording. This instrument will be installed at the 1.6m New Solar Telescope (NST) of Big Bear Solar Observatory, which has a high spatial resolution of 0.065" at 500nm. Adopting the cloud model of radiative transfer and using the model parameters inferred from pre-existing observations, we have simulated a set of spectral profiles of the lines that are emitted by a filament on the disk or a prominence at the limb. Taking into account the parameters of the instrument, we have estimated the photon count to be recorded by the CCD cameras, the signal-to-noise ratios, and so on. We have also found that FISS is suitable for the study of multi-velocity threads in filaments if the spectral profiles of Ca II lines are recorded together with $H{\alpha}$ lines.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.103-111
• /
• 2009

This study is to help make-up and coordination for image-making after analysis of facial color and shape of elderly women. The data was analyzed 55-75 years old 212 elderly women's face color and pictures by means of SPSS 12.0 statistics package. On the basis of the colorimetric data on face by Minolta CM2500D, this research considered the analysis of facial color, patternization of facial color and its analysis by age group; for the analysis of facial shape, this research patternized facial shape and analyzed its characteristic using both contour-based facial shape analysis and Kamata facial shape analysis. As for facial color, it was found that the lower age bracket has bright and reddish face, looking fine, while the higher age bracket has a conspicuously yellowish face, looking bad. The community of facial color is classified as 3 types and it was found out that the facial color of the subjects belonging to Type 3, whose L value is the largest, looked the brightest; the face of the subjects belonging to Type 2, whose a value is the largest, was much tinged with red, and the face of the subjects belonging to Type 1, whose b value is the largest were tinged with yellow. According to the analysis of facial shape, there appeared oval & long forms in the classification by contour, while there appeared a lot of downward-directed power and inner-directed power in the classification by Kamata, which is believed to reflect the phenomenon that their chin line becomes roundish and the facial length also tend to be longer due to aging.

• 콘크리트학회논문집
• /
• 제17권2호
• /
• pp.293-302
• /
• 2005

This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.

• 자원리싸이클링
• /
• 제8권5호
• /
• pp.51-58
• /
• 1999

석탄화력 발전소에서 발생하는 수백만 톤의 석탄회는 콘크리트 혼화재 및 건축자재로 재활용이 가능함에도 불구하고 과다한 미연탄소 함량으로 인해 대부분 회사장(Ash Pond) 되는데, 이로 인해 환경오염유발, 회사장 포화에 따른 발전소의 수명 감소, 그리고 재활용 가능한 자원의 낭비와 같은 문제가 발생한다. 본 연구는 석탄회 내의 미연탄소분을 분리하여 미연탄소분 함량이 낮은 고순도 석탄회를 회수하기 위해 직류관 믹서(In-Line Mixer) 발생기키는 역류형 컬럼부선기를 이용하였다. 이때 입자 표면에 소수성의 특성을 강화시키는 포스제의 증가에 따른 석탄회와 미연탄소 입자의 분리 특성을 분석하였다. 석탕회 톤당 8ι의 포수제를 사용한 역류형 컬럼 부선기를 이용하여 미연탄소분 함유량이 7%인 석탄회를 분리 실험한 결과 미연탄소분 함유량 0.5%인 고순도 석탄회를 88.2% 회수하였다. 그리고 질량 평균입경이 21.2$mu extrm{m}$인 석탄회를 분리 실험하여 입도를 분석한 결과 분리 정도에 따라 입도는 뚜렷하게 구별되어 나타났는데, 분리효율이 증가할수록 정제 석탄회의 경우 입도는 조대해져 입도 분포의 양극화 현상이 뚜렷하게 나타났다. 포수제의 투입량이 증대함에 따라 미연탄소 입자의 계면에 소수성이 강화되어 분리 특성이 향상되었으며, 이때 회수한 고순도 석탄회의 입도는 미세화 되는 경향이 나타났다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권4호
• /
• pp.575-580
• /
• 2017

Moire artifact는 미세병변과 주파수 대역이 중첩되기 때문에 moire artifact를 제거하는 Image processing software를 사용할 경우 미세 병변의 손실을 가져올 수 있다. 본 연구에서는 SD(Sprague Dawley) Rat에 microcalcification과 microfracture와 같은 미세병변을 임의로 형성하여 영상화하고, reference 영상과 grid suppression software를 사용한 영상, optimizied grid 영상을 비교 분석하였다. 영상은 두 명의 영상의학과 전문의가 컨소시엄을 형성하여 판독하였고, 판독 결과 값은 McNemar's test 이용하여 평가하였다. 73개의 microcalcifications 중 Grid suppression후 13 cases에서, optimized grid를 사용한 영상은 3 cases에서 영상의 손실이 확인되어 Grid suppression후의 영상이 통계적으로 유의하게 영상 손실을 발생하고 있음을 보여주고 있다(p=0.021). 총 53개의 fracture line은 Grid suppression을 시행한 후 영상에서 19 cases가 영상의 손실을 보였고, optimized grid를 사용한 영상에서는 영상손실이 없는 것으로 판독되었다. 따라서 미세병변을 진단하는 영상에 있어 moire artifact를 제거하기 위한 grid suppression software 사용은 신중하게 고려되어야 할 것이다.

• 한국운동역학회지
• /
• 제22권4호
• /
• pp.429-435
• /
• 2012

The purpose of this study was to determine the biomechanical effect of wearing carbon nanotube-based insole on cushioning and muscle tuning during drop landing. Twenty male university students(age: $21.2{\pm}1.5yrs$, height: $175.4{\pm}4.7cm$, weight: $70.2{\pm}5.8kg$) who have no musculoskeletal disorder were recruited as the subjects. Average axial strain, average shear strain, inversion angle, linear velocity, angular velocity, vertical GRF and loading rate were determined for each trial. For each dependent variable, a one-way analysis of variance(ANOVA) with repeated measures was performed to test if significant difference existed among different three conditions(p<.05). The results showed that Average axial strain of line 4 was significantly less in CNT compared with EVA and PU during IP phase. The average shear strain was less in CNT compared with EVA and PU during other phases. The inversion angle was increased in CNT compared with EVA and PU during all phase. In linear velocity, angular velocity, vertical GRF and loading rate, there were no significant difference between the three groups. This result seems that fine particle of carbon nanotube couldn't make geometric form which can absolve impact force by increasing density through eliminating voids of forms. Thus, searching for methods that keep voids of forms may play a pivotal role in developing of insole. This has led to suggestions of the need for further biomechanical analysis to these factors.

• 한국재료학회지
• /
• 제19권7호
• /
• pp.349-355
• /
• 2009

Metal thin film patterns on a LTCC substrate, which was connected through inner via and metal paste for electrical signals, were formed by a screen printing process that used electric paste, such as silver and copper, in a conventional method. This method brought about many problems, such as non uniform thickness in printing, large line spaces, and non-clearance. As a result of these problems, it was very difficult to perform fine and high resolution for high frequency signals. In this study, the electric signal patterns were formed with the sputtered metal thin films (Ti, Cu) on an LTCC substrate that was coated with protective oxide layers, such as $TiO_2$ and $SiO_2$. These electric signal patterns' morphology, surface bonding strength, and effect on electro plating were also investigated. After putting a sold ball on the sputtered metal thin films, their adhesion strength on the LTCC substrate was also evaluated. The protective oxide layers were found to play important roles in creating a strong design for electric components and integrating circuit modules in high frequency ranges.