• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.627-631
• /
• 2005

In this study, low fatigue behavior of laser welded sheet metal were investigated. Before welding, the cross section of butt joint was prepared only by fine shearing without milling process. Specimens were same sheet metal and welding condition that using automobile manufacturing company at present. Butt joint of cold rolled sheet metal was welded by $CO_2$ laser. It is used that welding condition such as laser welding speed was 5.5m/sec and laser output power was 5kW for 0.8mm and 1.2mm sheet metal. The laser weldments were machined same or different thickness and same or different material. In order to mechanical properties of around welding zone, hardness test was performed. Hardness of welding bead is about 2 times greater than base material. We performed the low cycle fatigue tests for obtaining fatigue properties about thickness and the weld line direction of specimen. The results of strain controlled low cycle fatigue test indicate that all specimens occur cyclic softening, as indicated by the decrease in stress to reach a prescribed strain.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.231-235
• /
• 2005

Most tissue engineering strategies for creating functional replacement tissues or organs rely on the application of temporary three-dimensional scaffolds to guide the proliferation and spread of seeded cells in vitro and in vivo. Scaffolds should be satisfied following requirements; macrostructure to promote cell proliferation, pore interconnectivity, pore size ranging from 200 to $400{\mu}m$, surface chemistry and mechanical properties. Rapid prototyping techniques have often been used as an useful process that fabricates scaffolds with complex structures. In this study, a new process to fabricate a three-dimensional scaffolds using bio-compatible polymer has been developed. It employs a highly accurate three-dimensional positioning system with pressure-controlled syringe to deposit biopolymer structures. The pressure-activated microsyringe is equipped with fine-bore nozzles of various inner-diameters. In order to examine relationships between line width and process parameters such as nozzle height, applied pressure, and speed of needle, experiments were carried out. Based on the experimental results, three-dimensional scaffold was fabricated using the apparatus. It shows the validity of the proposed process.

• 패션비즈니스
• /
• 제9권6호
• /
• pp.86-100
• /
• 2005

This paper has examined how ugliness has aesthetically been portrayed in modern make-up. In the past, ugliness was regarded as an antonym of beauty, but it recently plays a role on part of beauty, as independent portion of art. It was Schegel who initially maintained the view. According to his theory, ugliness represents interesting things including suffering reality, shock, attention, humor, surprises brought by distort and deformation. Hegel had a different view on it. As for him, he had the notion that ugliness was the opposite to beauty and that it had to be dependent in art, he argued that art was subordinate to philosophy, and that it was just nostalgia for the past, not representing reality, therefore, it could not be a foothold in contemporary art. In this context, some images of ugliness can be classified accordingly to Schegel's view deteste, decadence and androgynous can be fallen into a category describing reality; fetish, kitsch and grotesque can be included in interesting things. There is no fine line between the two. There are sometimes things they have in common. They mutually draw attentions by distancing themselves from general images of beauty, or making many changes and distorts in its part, using unique materials, unprecedented attempts of colors which result in creative and shocking images. Attempts made in ugly images in modern art are widening its concept to depicting reality on the body of human beings, also creating its new definition, playing a major role in independent part of modern art, not in the past way like wearing make-up on the face to make it look better.

• 기록학연구
• /
• 제60호
• /
• pp.239-281
• /
• 2019

미국인 퍼시발 로웰은 최초로 사진기를 가지고 1883년에 조선에 정식으로 입국한 외국인으로서 고종의 사진을 비롯한 80여장의 사진자료를 남겼다. 이 사진자료들은 모두가 한국의 사진 역사상 최초이자 유일한 가치를 지니고 있으며 귀중한 역사적 정보를 가지고 있음에도 불구하고 적절한 연구가 수행된 적이 없다. 이 사진에 관련된 자료들은 대부분 미국에 소장되어 있는데, 사진과 관련된 정보는 많은 오류와 함께 웹사이트에 게시되고 있기 때문에 일부 책자와 연구자들에 의해서 오 인용되고 있다. 이에 필자는 로웰이 조선에서 촬영한 사진을 분석하여 그 내용을 파악하고, 사진자료의 대부분을 소장하고 있는 미국의 퍼트남자료관의 로웰의 조선관련 사진 아카이브의 문제점을 분석하고 오류에 대한 수정안을 제시했다.

• 천문학회보
• /
• 제44권1호
• /
• pp.44.4-44.4
• /
• 2019

The supernova remnant Cassiopeia A (Cas A) provides a unique opportunity to observe the fine details of the explosion of core-collapse supernova (SN). Previous optical and near-infrared (NIR) observations of Cas A have shown that the spatial distribution of the metal-enriched SN ejecta is very complicated, indicating that the SN explosion should have been asymmetric and turbulent, especially near the core. Recently, we obtained a long-exposure (~10 hr) image of Cas A by using the UKIRT 3.6-m telescope with a narrow-band filter centered at [Fe II] 1.644 um emission. This 'deep [Fe II] image' provides an unprecedented panoramic view of Cas A, revealing the distribution of dense SN ejecta over the entire remnant. We have carried out NIR multi-object spectroscopic observations of the dense ejecta knots in the northeastern (NE) and eastern (E) outer regions of the remnant using the MMIRS attached on the MMT 6.5-m telescope. A total of 67 ejecta knots are detected. By analyzing their spectra, we have found that the knots in the NE area show strong [S II]/[S III] and [Fe II] lines but little or no [P II] line, while those in the E outer region show strong [Fe II] lines but weak [S II]/[S III] lines. In this talk, we present the preliminary results of our NIR spectroscopic observations and discuss the implications.

• 대한금속재료학회지
• /
• 제49권7호
• /
• pp.541-548
• /
• 2011

Thermomechanical fatigue (TMF) behavior of heat resistant austenitic stainless steel was evaluated in the temperature range from 100$^{\circ}C$ to peak temperatures of 600 to 800$^{\circ}C$; The fatigue lives under TMF conditions were plotted against the plastic strain range and the dissipated energy per cycle. In the expression of the inelastic strain range versus fatigue life, the TMF data obtained at different temperature ranges were located close to a single line with a small deviation; however, when the dissipated energy per cycle, calculated from the area of the stress-strain hysteresis loops at the half of the fatigue life, was plotted against the fatigue life, the data showed greater scattering than the TMF life against the inelastic strain range. A noticeable stress relaxation in the stress-strain hysteresis curve took place at the peak temperatures higher than 700$^{\circ}C$, but all specimens in this study exhibited cyclic hardening behavior with TMF cycles. Recrystallization occurred during the TMF cycle concurrent with the formation of fine subgrains in the recrystallized region, which is considered to cause the cyclic hardening of the steel.

• Molecules and Cells
• /
• 제44권5호
• /
• pp.292-300
• /
• 2021

Macrophages residing in various tissue types are unique in terms of their anatomical locations, ontogenies, developmental pathways, gene expression patterns, and immunological functions. Alveolar macrophages (AMs) reside in the alveolar lumen of the lungs and serve as the first line of defense for the respiratory tract. The immunological functions of AMs are implicated in the pathogenesis of various pulmonary diseases such as allergic asthma, chronic obstructive pulmonary disorder (COPD), pulmonary alveolar proteinosis (PAP), viral infection, and bacterial infection. Thus, the molecular mechanisms driving the development and function of AMs have been extensively investigated. In this review article, we discuss the roles of granulocyte-macrophage colony-stimulating factor (GM-CSF) and transforming growth factor (TGF)-β in AM development, and provide an overview of the anti-inflammatory and pro-inflammatory functions of AMs in various contexts. Notably, we examine the relationships between the metabolic status of AMs and their development processes and functions. We hope that this review will provide new information and insight into AM development and function.

• BMB Reports
• /
• 제55권5호
• /
• pp.232-237
• /
• 2022

The Wnt/β-catenin signaling plays crucial roles in early development, tissue homeostasis, stem cells, and cancers. Here, we show that RNF152, an E3 ligase localized to lysosomes, acts as a negative regulator of the Wnt/β-catenin pathway during Xenopus early embryogenesis. Overexpression of wild-type (WT) RNF152 inhibited XWnt8-induced stabilization of β-catenin, ectopic expression of target genes, and activity of a Wnt-responsive promoter. Likewise, an E3 ligase-defective RNF152 had repressive effects on the Wnt-dependent gene responses but not its truncation mutant lacking the transmembrane domain. Conversely, knockdown of RNF152 further enhanced the transcriptional responses induced by XWnt8. RNF152 morphants exhibited defects in craniofacial structures and pigmentation. In line with this, the gain-of-RNF152 function interfered with the expression of neural crest (NC) markers, whereas its depletion up-regulated NC formation in the early embryo. Mechanistically, RNF152 inhibits the polymerization of Dishevelled, which is key to Wnt signaling, in an E3 ligase-independent manner. Together, these results suggest that RNF152 controls negatively Wnt/β-catenin signaling to fine-tune its activity for NC formation in Xenopus embryo.

• 센서학회지
• /
• 제32권4호
• /
• pp.232-237
• /
• 2023

This paper presents a system for estimating the position of a magnet using a magnetic sensor. An algorithm is presented to analyze the waveform and output voltage values of the magnetic field generated at each position when the magnet moves and to estimate the position of the magnet based on the analyzed data. Here, the magnet is sufficiently small to be inserted into a blood vessel and has a micro-magnetic field of hundreds of nanoteslas owing to the small size and shape of the guide wire. In this study, a highly sensitive magneto-impedance (MI) sensor was used to detect these micro-magnetic fields. Nine MI sensors were arranged in a 3×3 configuration to detect a magnetic field that changes according to the position of the magnet through the MI sensor, and the voltage value output was polynomially regressed to specify a position value for each voltage value. The accuracy was confirmed by comparing the actual position value with the estimated position value by expanding it from a 1D straight line to a 3D space. Additionally, we could estimate the position of the magnet within a 3% error.

• Journal of the Korean Wood Science and Technology
• /
• 제52권3호
• /
• pp.276-288
• /
• 2024

This study was conducted to reproduce the woodworking process of Baekje wooden storage facilities. Green timber of Quercus spp. was processed using ancient woodworking tools, and the tool-trace formed in this process were compared with the tool-trace of actual excavated artifacts. In the tool-trace analysis, the length and shape of the tool-trace were objectively recorded using a 3D Scan, and that were difficult to confirm with photograph were confirmed through stereoscopic microscope. As a result, there were two types of adze's tool-trace. One of them is minute straight Blade-top trace line when trimming the wood surface and the other is Plucked trace that appear when strongly chop at the wood. When a chisel bat was not used, a long and wide continuous shape blade trace was produced. And when the chisel head was struck with the chisel bat, a straight blade-top trace was regularly observed. Saw-trace was identified in several layers with fine straight stripes. Through this, it was found that the tool-trace of the woodworking tools, which is estimated to have been used in each process, and the tool-trace remaining in the Baekje wooden storage facility coincide.