• 펄프종이기술
• /
• 제36권1호
• /
• pp.75-80
• /
• 2004

This research was peformed to manufacture a shroud using hanji and to investigate the characteristics of the hanji shroud manufactured. A hanji shroud were manufactured by considering the designs of the traditional costumes of shroud. The vast fibers were used for the manufacture of hanji. The shroud manufactured could keep the natural feeling of hanji. The shroud showed the feasibility in sewing compared to textiles. However, fine needlework was required due to the poor appearance of small holes made by changing of sewing line. Since the hanji shroud has excellent ability in preservation for a long-term period and economical advantages compared to the shroud currently made by hemp and cotton cloth, the demand of the hanji shroud may be increased in the near future.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.53-58
• /
• 2018

A novel X-band high speed frequency sweep signal generator based on a tunable optoelectronic oscillator (OEO) incorporating a frequency-swept laser is presented and the theoretical fundamentals of the design are explained. A prototype of the generator with tuning range from 8.8552 GHz to 10.3992 GHz and a fine step about 8 MHz is achieved. The generated radiofrequency signal with a single sideband (SSB) phase noise lower than -100 dBc/Hz@10KHz is experimentally demonstrated within the whole tunable range, without any narrow RF band-pass filters in the loop. And the tuning speed of the frequency sweep signal generator can reach to over 1 GHz/s benefiting from applying a novel dispersion compensation modular instead of several tens of kilometers of optical fiber delay line in the system.

• 대한심미치과학회지
• /
• 제11권2호
• /
• pp.33-36
• /
• 2002

As patients have concerned the esthetics of dental restorations, the porcelain fused to metal restorations have gain their popularity due to their strength and esthetic appearance for many years. However, metal collar in subgingival level of porcelain fused to metal restoration often causes black shadows. Inadequately positioned metal collar causes plaque depositions, gingival inflammations, black shadows, and discolorations of margin area. Those problems can be avoided by a clear finishing line, well-fabricated provisional restorations with precise margin and fine polishing, collarless porcelain fused to metal restoration, and all ceramic restoration. In this case report, collarless porcelain fused to metal restoration was used to treat cervical discoloration from old restorations.

• 소성∙가공
• /
• 제16권6호
• /
• pp.463-466
• /
• 2007

Micro-wire made from straightening process invents high added value and it has been adopted many industrial fields. Therefore, many research activities about straightening process are advanced actively. It is known that fine straightness of micro-wire can be obtained by removing residual stress induced during the manufacturing processes. Generally, residual stress is removed or minimized through several drawing processes with heat treatment. In this study, the residual stress at each straightening process is calculated and monitored by finite element analyses and the main reason of stress change is investigated.

• 천문학회보
• /
• 제42권2호
• /
• pp.83.2-83.2
• /
• 2017

We report observations of light bridge (LB) jets taken with the New Solar Telescope. Jets as dark, fine threads occurred lined along both edges of a LB of a sunspot, which is a bright and elongated structure that divides a sunspot's umbra into two or more parts. This LB jets are observed for about three hours with $H{\alpha}$ filtergraph at ${\pm}0.4{\AA}$, ${\pm}0.8{\AA}$ from the line center, TiO filtergraph, and near infra-red imaging spectropolarimeter (NIRIS). High resolution $H{\alpha}$ data revealed that subsequent ejection of LB jets were associated with subsequent brightening along the edge of the LB. Also, this subsequent brightening was spatially correlated with both photospheric flow and magnetic field change detected from the TiO and NIRIS data, respectively. Preliminary results of LB jet observation and discussions on its formation mechanism will be presented.

• Natural Product Sciences
• /
• 제9권4호
• /
• pp.273-277
• /
• 2003

Salicornia herbacea is an annual herb growing in salt marshes and on muddy seashores. Salicornia herbacea has been used as a fork medicine as well as a seasoned vegetable. In fork medicine, Salicornia herbacea has been used to treat a variety of diseases such as constipation, obesity, diabetes, asthma, arthritis and cancer. However, the biological mechanisms for these activities have not been characterized, nor the active components. The immunomodulatory activity of Salicornia herbacea components were studied in the present study. The components of Salicornia herbacea were prepared from the whole plant by passage through a fine screen, and then dialyzed against PBS overnight. Immunomodulatory activities of the Salicornia herbacea components were examined on a mouse macrophage cell line, RAW 264.7 cells. The Salicornia herbacea components were shown to stimulate cytokine production, nitric oxide release, and expression of surface molecules in a dose dependent manner. The Salicornia herbacea components also induced further differentiation of slightly adherent RAW 264.7 cell into strongly adherent macrophages. These results indicate that Salicornia herbacea contains immunomodulator(s) that induces activation of macrophages.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.74-80
• /
• 2004

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, the finishing process of a non-ferromagnetic pipe by a static magnetic field method is introduced and its finishing characteristics is discussed with effective factors by various experiments. From these experimental results, it is found that the magnetic abrasives inserted in the pipe are arranged according to the magnetic force line. Through the experimental, it is possible to estimate the proper supply volume of the abrasive, which in proportional to the diameter of pipe.

• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.30-39
• /
• 1994

A 1-chip high quality binarizing VLSI image processor (which has 8 bit ADC. 6 bit flash ADC, 15K standard cell, and 1K word ROM) based on 10 MIPS 16 bit DSP is implemented for FAX. This image processor(IP) performs image pre-processing. image quality improvement in copying and sending mode, and mixed image processing based on the fuzzy theory. And smoothing in sub-scan direction is applied for normal receiving mode data so the received data is enhanced like fine mode data. Each algorithm is processed with the same type of image processing window and 2-D image processing is implemented with a 1-D line buffer. The fabricated chip is applied to a FAX machine and image quality improvement is verified.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.325-330
• /
• 2001

Shizhuyuan W-Mo-Bi-Ca $F_2$polymetallic ore is classified to the refractory one due to its complex property, fine dissemination and close association of minerals. Through several years of researches, in line with GY new mineral processing technology developed by Guangzhou Research Institute of Nonferrous Metals, in sulfide flotation circuit, an iso-flotability flowsheet is used to replace original overall bulk flotation flowsheet, and in tungsten flotation circuit, a new chelating type-GY reagent and a special pulp-conditioning system and a new technology of wolframite slime flotation are used to replace the traditional "Caustic Soda Method"$_{［1］}$, the metallurgical performance is greatly improved. Besides, GY New Method has created a favorable condition for comprehensive recovery of fluoride from tungsten flotation tailings. Notable economic benefit has been achieved.d.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.511-516
• /
• 2007

Rubber wheeled AGT(Automated Guide-way Transit) system is a prominence transportation system for urban area, because of its low construction cost and management, low noise and vibration and fine exterior view. AGT system uses concrete tracks. Concrete can be easily damaged by the impact, change of temperature and external loads. The fault of concrete track is harmful not only to riding quality but also to bridge. Therefore, in this study, the effects of railway prominence to the bridge are surveyed by experimental method. The experiment was executed for PSC bridge at AGT test line in Kyungsan. And the test results for 5mm, 10mm prominence and without prominence are compared and investigated, according to the vehicle speed.