• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권4호
• /
• pp.437-444
• /
• 2015

A high output power voltage controlled oscillator (VCO) in the U-band was implemented using a 65 nm CMOS process. The proposed VCO used a transmission line to increase output voltage swing and overcome the limitations of CMOS technologies. Two varactor banks were used for fine tuning with a 5% frequency tuning range. The proposed VCO showed small variation in output voltage and operated at 51.55-54.18 GHz. The measured phase noises were -51.53 dBc/Hz, -91.84 dBc/Hz, and -101.07 dBc/Hz at offset frequencies of 10 kHz, 1 MHz, and 10 MHz, respectively, with stable output power. The chip area, including the output buffer, is $0.16{\times}0.16mm^2$ and the maximum output power was -0.11 dBm. The power consumption was 33.4 mW with a supply voltage of 1.2-V. The measured $FOM_P$ was -190.8 dBc/Hz.

• 마이크로전자및패키징학회지
• /
• 제5권2호
• /
• pp.21-26
• /
• 1998

대용량, 고속데이터 처리가 요구되는 System 개발은 이들의 복잡하고 고기능의 회 로 구현이 가능하냐에 달려 있고 또한 이들고기능 요구를 가장 잘 만족할수 있는 패키지는 MCM 이라 할 수있다. 시스템의 고속화, 소형화는 회로의 복잡성을 요구하는 있는 이를 패 키지로 구현하는 MCM은 시험성 확보에 심각한 문제점으로 나타나고 있다. 본 논문에서는 고밀도 구조의 MCM 기판에 대한 Interconnetion Line 시험검증을 위한 Flying Prober의 적 용 및 모듈 패키징 공정에 대한 조립성 검증을 위한 BST에 대해 설명한다. 연구에 사용된 MCM 모듈은 MCM-D 공정으로 제작되었으며 31um 신호선폭, 50um Via Hole Dia. 5신호 선층 5절연층 및 455 Net의 기판으로절연층은 Dow chemical의 BCB-4024/4026을 적용하였 다. 조립은 3 ASIC, 24소자 실장 및 2000 Wire Bonding으로 이루어지며 패키지는 방열특성 을 고려한 BGA(491 I /O,50mil pitch)를 개발하여 사용하였다. MCM 기판의미세패턴으로 구성된 Interconnection Line에 대해 Fine Ptich Probing이 가능한 Flying Prober를 사용하 여 평가하였으며 BST를 이용하여 실장소자의 KGD평가 및 능동, 수동소자가 실장된 MCM Package의 조립시험성을 확보할수 있었다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2011년도 제43차 동계학술발표논문집 19권1호
• /
• pp.59-62
• /
• 2011

A new method is proposed for stereo vision where solution to disparity map is presented in terms of Line constraint and Reliability space -- the first constraint proposes a progressive framework for stereo matching which applies local area pixel-values from corresponding lines in the left and right image pairs. The second states that reliability space based on corresponding points records the disparity and then we are able to apply the median filter in order to reduce the noises which occur in the process. A coarse to fine result is presented after the median filtering, which improves the final result qualitatively. Experiment is evaluated by rectified stereo matching images pairs from Middlebury datasets and has proved that those two adopted strategies yield good matching quantitative results in terms of fast running speed.

• 한국정밀공학회지
• /
• 제29권6호
• /
• pp.686-692
• /
• 2012

Solid free-form fabrication (SFF) technology was developed to fabricate three-dimensional (3D) scaffolds for tissue engineering (TE) applications. In this study, we developed a polymer deposition system (PDS) and created 3D microstructures using a bioresorbable polycaprolactone (PCL) polymer. Fabrication of 3D scaffolds by PDS requires a combination of several devices, including a heating system, dispenser, and motion controller. The system can process a polymer with extremely high precision by using a 200 ${\mu}m$ nozzle. Based on scanning electron microscope (SEM) images, both the line width and the piled line height were fine and uniform. Several 3D micro-structures, including the ANU pattern (a pattern named after Andong National University), $45^{\circ}$ pattern square, frame, cylindrical, triangular, cross-shaped, and hexagon, have been fabricated using the polymer deposition system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2824-2826
• /
• 2002

Immune system is an evolutionary biological system to protect innumerable foreign materials such as virus, germ cell, and etcetera. Immune algorithm is the modeling of this systems response that has adaptation and reliability when disturbance occur. In this paper, immune algorithm is proposed to control four wheels steering AGV(Automated Guided Vehicle) in container yard. The adaptive immune system is applied to the PID controller. For design the PID controller using immune algorithm, we tune PID parameters by off-line manner, in order to avoid the damage from abrupt control force. Repeatedly, the PID parameters are adjusted to be accurate by on-line fine tuner of immune algorithm. And then the computer simulation result from the viewpoint of yaw rate and lateral displacement are analyzed and compared with result of conventional PID controller.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1472-1475
• /
• 2009

The microfluidics channel were fabricated using thermal roll-imprinting process on plastic substrates. As rollimprinting surface is heated directly at $100^{\circ}C$ and printing process proceed 380/400 kgf pressure, we fabricated microfluidic patterns separated line of $40.04{\mu}m$, serpentine line of $113.89{\mu}m$ and depth of imprint pattern is $15.35{\mu}m$, it means to get fine pattern has more than 70% imprint rate in designed mask.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권2호
• /
• pp.114-120
• /
• 2003

According to the use of distribution automation systems, the function to find or to search a fault phase is necessary for automatic switches in a distribution substation. In this paper, two algorithms are developed to fine the fault circuit and the fault phase for the automatic switches in substation with ungrounded power system. One is the fault circuit searching method using the zero sequence voltage at the bus and zero sequence current of circuit current and the other is to find the fault phase using the line voltage and zero sequence current. The developed algorithms are tested in the case study simulations. An ungrounded power system is modeled by EMTP as a case study system. The developed algorithms are tested in the case study simulations and each shows correct results.

• Journal of the Optical Society of Korea
• /
• 제8권1호
• /
• pp.17-20
• /
• 2004

An in-line variable attenuator has been proposed and demonstrated exploiting a side-polished single-mode (SM) fiber evanescently coupled with an index matched dielectric plate. The attenuation can be controlled by fine mechanical sliding of the index matched dielectric plate. We have achieved 49 ㏈ dynamic range and very low excess loss of 0.2 ㏈ at 1550 nm wavelength. The measured polarization dependent losses (PDL) were 0.1, 0.2, and 0.4 ㏈ at 10, 20, and 30 ㏈ attenuation, respectively. Wavelength sensitivity was measured to be -0.017/nm ㏈ at 20 ㏈ attenuation.

• 한국의상디자인학회지
• /
• 제2권2호
• /
• pp.41-54
• /
• 2000

History of fashion and clothing is needed to understand modern fashion and to predict Future mode. The period of Romanticism in fine arts was from the end 18th century up to the first half of 19th century. The characteristics of shilouttes were found in the emphasis owomen's body line. This feature of romantic fashion is founded in 1960, 1970, 1980, 1990'mode. Major characters of this times are retro of romantic costume. As time goes by, more romantic fashion was set up and new corncern of 2000 fashion trend. The Characteristics of romantic image in 2000 of fashion trend are the emphasis of romantic details and decorations. Such as ruffle, frill, shirring, beads, spangle, sequin, flower. Trend colors are pink, lilac, aqua blue, yellow, green, pastel color. Trend materials chiffon, organza, satin, velvet, gauze, georgette, lace and glittery material. And floral print and stripe print. Forward­looking fashion is ethnic­romantic image influenced India. Trend and fashion have very close relationship and if it is fully comprehended, it will be good opportunity to awkardness againnst new fashion line.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.559-562
• /
• 2000

In this paper, coplanar waveguide fed antennas (CPWFAs) insetting two slits to boundary of the square microstrip patch are presented. These slits play roles in not only lowering a resonant frequency but also fine-tuning for the proposed antenna together with open stub of CPW feed line. The CPWFAs were designed and manufactured using microwave dielectrics (Al,Mg)TaO$_2$ having high dielectric-constant ($\varepsilon$r=20). The return loss and input impedance of the CPWFAs were investigated in terms of the slit length and open stub length of CPW feed line. It is shown that a resonant frequency decreases as the slit length increases.