• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.9-12
• /
• 2001

Optical aligning process to archive the maximum optical coupling is crucial in many optical device manufacturing line such as laser diode module. Due to the three-dimensional nature of housing module and the aligning process for laser diode coupler, large amount of the manufacturing time, typically ranging from tens of minutes to an hour has to be devoted to the aligning process alone. In this thesis, we propose a new optical aligning process that employee a two-pass algorithm: coarse-to-fine search. Coarse search is a kind of blind search that finds the candidate region where the maximum optical coupling might mostly occur, followed by a fine searching that finds the maximum within the candidate region. The algorithm has been tested on 50 samples of cam-type laser diode modules, and the experimental results are analyzed in terms of aligning time and coupling efficiency.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.334-341
• /
• 2015

This research outlines the design of a HR-TDC (High Resolution Time-to-Digital Converter) for high data rate communication systems using a $0.18{\mu}m$ CMOS process. The coarse-fine architecture has been adopted to improve the resolution of the TDC. A two-stage vernier time amplifier (2S-VTA) was used to amplify the time residue, and the gain of the 2S-VTA was larger than 64. The error during time amplification was compensated using two FTDCs (Fine-TDC) with their outputs. The resolution of the HR-TDC was 0.15 ps with a 12-bit output and the power consumption was 4.32 mW with a 1.8-V supply voltage.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.261-266
• /
• 1998

In developing the high density memory device, the etching of fine pattern is becoming increasingly important. Therefore, definition of ultra fine line and space pattern and minimization of damage and contamination are essential process. Also, the high density plasma in low operating pressure is necessary. The candidates of high density plasma sources are electron cyclotron resonance plasma, helicon wave plasma, helical resonator, and inductively coupled plasma. In this study, planar type magnetized inductively coupled plasma etcher has been built. The density and temperature of Ar plasma are measured as a function of rf power, flow rate, external magnetic field, and pressure. The oxide etch rate and selectivity to polysilicon are measured as the above mentioned conditions and self-bias voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.303-303
• /
• 2007

Photo-imageable thick-film lithography technology was developed for the fabrication of embedded passives such as inductors and capacitors. In this study, photo-imageable dielectric and conductor pastes have apoted a negative type. Sodalime glass wafer, alumina substrate and zero-shrinkage LTCC green tapes were used as substrates. In result, The lithographic patterns were designed as lines and spaces for conductor material, or via-holes for ceramic, LTCC, materials. The scattering and reflection of UV-beam on the substrate had negative effects on fine patterning. The patterning performance was varied with the exposing and developing process conditions, and also varied with the substrate materials. Fine resolution of less then $50/50{\mu}m$ in line and space was obtained, which is difficult in screen printing method.

• 패션비즈니스
• /
• 제23권3호
• /
• pp.10-22
• /
• 2019

Eco-design is an environmental key point since consumers' consumption behaviors have huge impacts on the environment. The objective of this study was to investigate the various responses between Chinese and Korean consumers and to look into the effects that consumers' environmental awareness have on eco-design clothing product purchase, usage and disposal. The study comprised of literature review and empirical research conducted through on line survey (www .sojump.com) from 5-20th Jan 2019. 200 Chinese respondents and 200 Korean respondents were collected and structural equation modeling (SEM) was used to test the research hypotheses. The results suggested that consumers' environmental awareness positively influenced their three ecological dimensions about consumption. In addition, the positive relationship was also influenced by respondents' nationality. These results suggest that consumers' environmental awareness is an important responsibilities and could become more important retail mix for clothing marketers. Findings would also enable environmental organizations to understand eco behavior and to design appropriate strategic decisions to appeal eco-summers. Other findings and implications were also discussed.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.7-12
• /
• 2018

This article proposes an ultrahigh frequency band radio frequency identification (RFID) tag antenna for drug runout management that can be used in hospitals. The RFID tag antenna is designed to function as a sensor that alerts drug runout when a drug inside a drip chamber is completely consumed but does not work when a drug remains inside a drop chamber. A previously proposed 915 MHz dipole antenna, is too large to be attached to the drip chamber of a feeding bag. Moreover, the length of the dipole (L) should be increased for conjugate matching with an RFID chip. Therefore, the dipole antenna is downsized so that it can be attached to the drip chamber through a fine meander line structure coupling with a corrugate meander line. A transparent cover is added to enhance the grip force between the designed antenna and the drip chamber and to enable detachment. The dimensions of the completed antenna structure attachable to a drip chamber are 32.59 mm (height) and 13.5 mm (width). The gain reduction due to the decreased antenna length is enhanced. The fabricated antenna shows an average omni-directional read range of 10.65 m on a horizontal plane and has the function of sensing the presence of a drug.

• 대한전기학회논문지
• /
• 제36권9호
• /
• pp.609-615
• /
• 1987

The optimal operation of power system is developed by alternately using real power dispatch and reactive power dispatch problem. The real power system scheduling process is formulated as an optimization problem with linear inequality constraints. A.C. loadflow method is used for the problem solution and line losses are considered. The constraints under consideration are generator power limits, load scehdling limits and line capacity limits. In solving the objective function the Dual Relaxation method is adopted. Tests indicate that the method is practical for real time application. The reactive power control problem uses the Dual Simplex Relaxation method as in the real scheduling case. Insted of minimizing the cost of power system, the objective is selected as to determine the highest possible voltage schedule. The constraints under consideration are the voltage limits at each node and the possibilities of supply or absobtion of reactive energy by generator units and the compensation facilities. Tests indicate that the method is practical for real time applications. The overall optimization methods developed in this paper proved to obtained fine results in minimizing object function compared with the method without using voltage control. And the overall voltage profiles were also improved.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.179-185
• /
• 2001

In this study, a visual sensor system for weld seam tracking the I-butt weld joints in GMA welding was constructed. The sensor system consists of a CCD camera, a diode laser with a cylindrical lens and a band-pass-filter to overcome the degrading of image due to spatters and arc light. In order to obtain the enhanced image, quantitative relationship between laser intensity and iris number was investigated. Throughout the repeated experiments, the shutter speed was set at 1-milisecond for minimizing the effect of spatters on the image, and therefore most of the spatter trace in the image have been found to be reduced. Region of interest was defined from the entire image and gray level of searched laser line was compared to that of weld line. The differences between these gray levels lead to spot the position of weld joint using central difference method. The results showed that, as long as weld line was within $^\pm$15$^\circ$from the longitudinal straight fine, the system constructed in this study could track the weld line successful1y. Since the processing time reduced to 0.05 sec, it is expected that the developed method could be adopted to high speed welding such as laser welding.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.270-270
• /
• 2008

We present details of experimental results in the fabrication of high density line patterns, using imprint technique that can provide a simple and comparatively cost-effective manufacturing means. Barrier array structures for display or interconnects for semiconductor applications were the aims of this study. For pattern fabrication, a polymer layer (Ajinomoto GX-13 dielectric film) with a thickness of 38um that can act as either an insulating or a dielectric layer was laminated on a substrate. Fine tracks were then formed using a patterned stamp under isostatic pressure. The line width was ranged between 10 to 60 mm. A self-assembled monolayer (SAM) of fluorinated alkylchlorosilane [$CF_3(CF_2)5(CH_2)2SiCl_3$] as an anti-sticking layer was coated on the surface of the stamp prior to thermal imprint to improve the de-molding characteristic.

• 수면정신생리
• /
• 제8권2호
• /
• pp.129-137
• /
• 2001

목 적 : 일상생활에서 하루 밤의 수면박탈은 흔히 있을 수 있다. 저자들은 전산화 신경인지검사를 통하여 38시간의 수면 박탈이 상지의 미세 운동수행능력에 어떠한 변화를 주는지를 연구하고자 하였다. 방 법 : 고려대학교 의과대학에 재학중인 학생중 정신적, 신체적으로 건강한 지원자 24명(M:F=21:3, mean age : $24.67{\pm}1.37$)을 대상으로 하였으며 모두 오른 손잡이었다. 또한 수면일지를 작성하게 하여 평소에 수면부족을 보이는 군은 배제하였다. Vienna Test System에서 나타날 수 있는 학습효과를 최소화하기 위하여 검사 하루 전에 미리 같은 검사를 시행하였다. 검사 전날 밤에 피험자들은 충분한 수면을 취하였으며, 검사 당일 오전 6시경에 기상하였다. 실험 첫날 오전 6시부터 다음날 오후 8시까지 38시간동안 수면을 박탈하였으며, 검사 첫날과 둘째 날의 오전 7시와 오후 7시, 총 4차례 Vienna Test System중 Motor Performance Series를 시행하였다. 실험기간 중에 모든 피험자에게 수면에 영향을 줄 수 있는 약물의 복용은 금지되었으며, 과도한 운동도 금지되었다. 자료는 SPSS를 이용하여 피험자당 4회 시행한 검사 결과를 Repeated ANOVA를 시행하였으며, 일중리듬을 고려하여 각 아침, 저녁 session끼리의 검사 결과를 paired t-test를 시행하여서 비교하였다. 결 과 : Motor Performance Series에서 수면박탈에 따라서 상지의 오른손의 운동 기능에 있어 수행능력의 저하가 나타났다. 각 소검사를 보면 tapping의 total number(p<.005), line tracking의 number of misses(p<.05), length of misses (p<.05), inserting short pin의 total length(p<.01), inserting long pin의 total length(p<.05), aiming의 number of misses (p<.05)에서 통계적으로 유의미한 기능의 저하가 나타났다. 결 론 : 이상의 결과는 38시간의 수면박탈만으로도 유의미한 운동기능의 저하가 나타난다는 것을 보여준 것이며, 특히 가장 예민하게 미세 운동기능을 발휘할 수 있는 우세한 오른손에서 기능저하가 나타났다. Inserting long pin보다는 inserting short pin 검사에서 기능이 저하되었고, line tracking, aiming에서 검사 결과의 수행 저하가 두드러진 것으로 보아서, 미세한 운동기능일수록 영향을 많이 받는다고 할 수 있겠으며, line tracking에서 전체 검사 시간은 감소되며, 수행에서 실수가 늘어난 것으로 보아, 수면박탈에 따라서 조급한 수행이 이루어진다고 보여진다. 또한 주어진 32초간의 시간 안에 최대한의 속도로 펜을 두드리는 tapping 검사에서 두드러진 저하를 보인 점에서, 수면박탈에 의하여 근육의 피로가 쉽게 나타난다고 생각 할 수 있겠다.