• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.917-925
• /
• 2023

Efforts for developing the domestic horse industry in South Korea are evident through the various national policies. Proper management of stables for ensuring the health of horses is essential to sustain the growing equine industry. This study aimed to measure the fine dust emissions in stables based on the type and quantity of bedding used for horses, for establishing guidelines pertaining to bedding use in stables. The stables accommodated 12 horses. Sawdust, wood shavings, wood pellet, and straw were chosen as treatments. Three different quantities (approximately 3, 6, and 9 cm in height) were applied for each type. Fine dust measurements were carried out at three time points, with each measuring period lasting for approximately three weeks. Measurements included PM2.5 and PM10 fine dust levels. The initial analysis revealed that, sawdust with 9 cm bedding had the highest dust levels; approximately 54.6 ㎍/m³, for PM2.5 and 95.3 ㎍/m³, for PM10. Sawdust bedding at the highest quantity (9 cm) exhibited significantly higher initial fine dust emissions. These findings suggest that bedding materials with smaller particle size, such as sawdust and wood shavings, tend to produce finer dust. Initially, the fine dust emissions decreased in all bedding types and quantities, possibly due to the increased moisture content of bedding owing to horse manure production. However, emissions increased subsequently due to ammonia production.

• Acta Via Serica
• /
• v.4 no.1
• /
• pp.87-109
• /
• 2019

In the Iranian epic $K{\bar{u}}shn{\bar{a}}ma$, there is a rather interesting story that recounts how the inhabitants of $B.s{\bar{i}}l\bar{a}$ cross-breed their domesticated horses with a magical horse living in the sea in order to obtain fine-bred ones. What is even more interesting is that similar accounts are also seen in many of other classical Perso-Arabic works and Chinese sources. The regions that such events took place in mainly spread over Central Asia and western China while in $K{\bar{u}}shn{\bar{a}}ma$, the story happens in $B.s{\bar{i}}l\bar{a}$, a legendary kingdom with its historical prototype being Silla. By sorting out certain records of how ancient people sought fine horses by cross-breeding domesticated horses with wild horses that inhabited mountains and waters within Chinese sources and classical Muslim works, and comparing these accounts with similar plot lines as depicted in $K{\bar{u}}shn{\bar{a}}ma$, this paper attempts to elucidate that the story in $K{\bar{u}}shn{\bar{a}}ma$ is a result of flourishing land and maritime exchanges between East Asia and West Asia during ancient and medieval times, rather than a purely literary fiction. It was not only influenced by the horse culture that thrived over the Eurasian Steppe, but the story is also coincidentally in accordance with the fact that the nomadic zone which lies within the central Eurasian continent extends as far as the Korean Peninsula in northeast Asia.

• The Research Journal of the Costume Culture
• /
• v.5 no.2
• /
• pp.217-244
• /
• 1997

This study is about the Korean Jockey's uniform, etc. and horse riding costume as the traditional riding culture grows. I studied informations from the Korea Racing Association's equestrian park, equine museum and Seoul Racecourse Trainers & Jockey's Association. The international regulations of riding costume are compared with Korean regulations, and I consulted some reference books, materials of sports wear and catalogues of some brands regarding horse equipment. The contents includes ; 1. Analysis of informations about horse racing 2. Study of racing, for detail comparative analysis on the following aspects ; -Symbolism, riding costume of jockey, that is, color·pattern·and some formal designs. 3. Suggestion for reasonable and fashionable riding costumes. In the aspects of design, there have not been any historical records, and material adjustments about riding costume in Korea. Therefore we should make more efforts to do developing our traditional costume culture. The result o this study is as follows ; 1. Riding is the sport of etiquette and manners. 2. Most of riding wears are the casual wear centered foreign licenced brands. 3. Study and investment upon specialized material development and processing technology are in demand 4. The need of the consumers are to be satisfied by the quality improvement of the native products design. In addition, we perform to horse racing which is fine play and leisure sports in current society. The horse riding will be a popular sports such as golf, wind surfing, skiing, etc. with the period including lots of kinds of leisure.

• Journal of Embryo Transfer
• /
• v.28 no.2
• /
• pp.87-93
• /
• 2013

The efficiency of artificial insemination (AI) for horses remains unsatisfactory. It is mainly because each process of AI causes a detrimental effect on semen quality. To sustain quality of semen properly, several factors including libido of stallions and sperm damage during sperm processing and preservation should be considered. Stallions with decent libido produce a high ratio of sperm to seminal plasma in their ejaculates, which is the ideal semen composition for maintaining sperm quality. Thus, to maximize the fertility rate upon AI, stallions should be appropriately managed to enhance their libido. Seminal plasma should have a positive effect on horse fertility in the case of natural breeding, whereas the effects of seminal plasma on both sperm viability and quality in the context of AI remain controversial. Centrifugation of semen is performed during semen processing to remove seminal plasma and to isolate fine quality sperm from semen. However, the centrifugation process can also result in sperm loss and damage. To solve this problem, several different centrifugation techniques such as Cushion Fluid along with dual and single Androcoll-E$^{TM}$ were developed to minimize loss of sperm and to damage at the bottom of the pellet. Most recently, a new technique without centrifugation was developed with the purpose of separating sperm from semen. AI techniques have been advanced to deliver sperm to optimal region of female reproductive tract at perfect timing. Recombinant equine luteinizing hormone (reLH) and low dose insemination techniques have been developed to maximize both fertility rate and the efficiency of AI. Horse breeders should consider that the entire AI procedure should be optimized for each stallion due to variation in individual horses for a uniformed AI protocol.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.240-243
• /
• 2008

In this paper, the design of Centrifugal Compressor which is used in sizes 50 horse power has 8 pressure ratio and numerical analysis of the flow within compressor varying tip clearance length are performed. To get high pressure ratio with low power the exit height of impellers is low but compressor has very high speed of revolution. So compressor has high specific speed although mass flow rate is very small. The shape of impellers at the first stage is carried out. Flow and performance characteristics of impellers has been analyzed by using a commercial CFD program, $Fine^{TM}$/turbo. The result shows that loss coefficient is affected by tip clearance length and compressor has proper tip clearance length. It is possible to decrease loss by selecting apt tip clearance length.

• Journal of Acupuncture Research
• /
• v.36 no.1
• /
• pp.38-44
• /
• 2019

Background: The phrase "Nine Needles" refers to the 9 types of acupuncture needles describing their shapes, sizes, and uses in Huangdi's Internal Classic Ling-shu. The aim of this study was to present 3D illustrations of the "Nine Types of Needles" based on Huangdi's Internal classic Ling-shu, taking into consideration the conformation and application of the Nine Needles. Methods: Sketches of the "Nine Needles" were based on references to those needles cited in Huangdi's Internal Classic Ling-shu, the Great Compendium of Acupuncture and Moxibustion, and the Golden Mirror of Medicine. The computer programs Creo 3.0, Keyshot 5, Adobe Photoshop CS5, and Adobe Illustrator CS5 were used for 3D modelling and visualization. Results: Based on a review of Huangdi's Internal Classic Ling-shu, illustrations of the Spade needle, Round-Pointed needle, Pressure needle, Sharp-Edged needle, Sword-Shaped needle, Round-Sharp needle, Fine needle, Long needle, and Large needle, 3D models were created. The Spade needle had a sharp, large head, the Round-Pointed needle had an egg-shaped tip, and the Pressure needle had a blunt head like a grain of millet. The Sharp-Edged needle had a sharp blade with a triangular edge for bloodletting. The Sword-Shaped needle resembled a sword. The Round-Sharp needle resembled a horse's tail. The Fine needle and the Long needle had sharp points and thin bodies. The Large needle had a cylindrical shaft and rounded tip. Conclusion: This study demonstrated that 3D illustrations could be generated for the Nine Needles according to the descriptions and figures provided in the ancient literature.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.4
• /
• pp.226-231
• /
• 2016

In order to remove fog often causes various troubles in our daily lives, the novel defog blower equipped the roller brush made of recycled horse's mane hair was developed. This work presents the overview of new defog devices and the experimental data obtained at two different kinds of defogging experiments. In the model experiment carried out at the enclosed cleanroom ($W5.9m{\times}L5.1m{\times}H2.4m$) targeted a vinyl house, fog was dissipated in less than 30 seconds in case with wind entrainment and two minutes 45 seconds in case without wind entrainment after running of the newly designed defog blower. When the demisting blower was run in a duct, it has an excellent mist sweeping qualities as well as a great removal effect for the background particles (89.5% and 65.4% scavenging rates for fine and coarse particles, respectively). It can be therefore said that the mist eliminator presented in this paper is ideal for use in the sealing space like a vinyl house and the industrial sites where required to remove both harmful mist and particle.

• Journal of the Korean Society of Costume
• /
• v.53 no.7
• /
• pp.95-109
• /
• 2003

The style of different styles of clothing have been developed by not only the natural environment and social effects. but also by various variables such as the peculiar cultures and religions of different ethnic groups. It is naturally accepted without question that the origin of trousers was derived from the Skytie race in the modern style of dress. And the style of those trousers has changed and developed throughout a long history in different environments and surroundings. As part of the research of the process in this styles of clothing, it is essential to know how the fabric of trousers has been developed and how the styles have been changed because of different weather conditions and different religions. Nowadays, Eurasian countries was scattered from western and eastern Asian countries to middle Asian countries such as Russia, Uzbekistan, Kazakistan, Turkey, Turkmenistan, Iran and China. These countries are located on the way to the Silk Road. They are fully developed in a cultural area among the different religions. In terms of cultural aspects within the different religions, men's trousers had developed the traditional style of this dress as one of the importnat items on the cultural basis. The ranges and types of these traditional trousers are divided by the regions, such as west and southern Asia, central Asia and China. Pakistan, Afghanistan, Iran, Iraq, Syria, Lebanon, Turkey. Jordan, Saudi Arabia, Kuwait and Israel was a part of the west and southern Asian countries which were located between western countries and eastern countries. This tribes wore Shalwar trousers which is a wide style of trousers. Shalwar in the western and eastern Asian region has a specific feature by the each nation but has the same distinctions such as by using very wide and loose style and tying a fine thread around the waist. Some central Asian countries consisted of part of China, Turkmenistan. the Republic of Tajikistan. the Republic of Kyrgyzstan and the Republic of Afganistan. These style of trousers are compound types which appeared with mixing Draperian Greek culture. So it can be inferred from this data that the horse-riding nomadic trousers which had been handed down from Skytie tribe through Persia. The style of the trousers in those regions has small pieces. The style of the trousers in China, which is located on the way to the far eastern countries, has developed new trousers put together two pieces of the textile. These widen trousers can be worn by using a sash belt. So we can find out that those trousers of countries which mentioned above have a common point and a rule.

• Journal of Life Science
• /
• v.17 no.2 s.82
• /
• pp.198-203
• /
• 2007

DNA transfection is a powerful tool for studying gene functions. The $Ca^{2+}$-phosphate precipitation remains one of the most popular and cost-effective transfection techniques. Mature neurons are more resistant to transfection than young ones and most other cell types, and easy to die if microenvironment changes. Here, we report a transfection protocol for mature neurons. The critical modifications are inclusion of glial cells in culture and careful control of $Ca^{2+}$-phosphate precipitation under microscope. Cerebral glial cells were grown until ${\sim}70-80%$ confluence in DMEM/10% horse serum, which was thereafter replaced with serum-free Neurobasal/Ara-C, and 319 hippocampal neurons were plated onto the glial layer Formation of fine $DNA/Ca^{2+}$-phosphate precipitates was induced using Clontech $CalPhos^{TM}$ Mammalian Transfection Kit, and the size ($0.5-1\;{\mu}m$ in diameter) and density(about 10 particles/$100\;{\mu}m^2$) were carefully controlled by the time of incubation in the medium. This modified protocol can be reliably applied for transfection of mature neurons that are maintained longer than two weeks in vitro, resulting in 10-15 healthy transfected neurons per a well of 24-well plates. The efficacy of the protocol was verified by punctate expression of $pEGFP-CaMKII{\alpha}$, a synaptic protein, and diffuse expression of pDsRed2. Our protocol provides a reliable method for transfection of mature neurons in vitro.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.316-333
• /
• 2021

In order to understand basic data for improving the fishing system and fishing vessel structure in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 to analyze opinions on the improvement of operation status and fishing vessel structure. The questionnaire survey consisted of ten questions on the operation status of coastal improved stow net fishery and six questions on the improvement of fishing vessel structure, and the results of each question were analyzed by the region, the captain's age, the captain's career and the age of fishing vessel. As a result of analyzing opinions on the operation status of the coastal improved stow net fishery, it was found that the average time required for casting net was 32.8 to 33.0 minutes and that the average time required for hauling net was 41.0 to 42.2 minutes which took 10 to 12 minutes more than for casting net. The most important work requiring improvement during fishing operation (the first priority) were 'hauling net operation,' 'readjustment and storage of fishing gear,' and 'fish handling' and the hardest factor in fishing management were in the order of 'reduction of catch,' 'labor shortage' and 'rising labor costs.' The most institutional improvement that is most needed in coastal improved stow net fishery was an 'using fine mesh nets.' Most of the respondent to the questions on the experience in hiring foreign crews was 'either hiring or willing to hire foreign crews,' and the average number of foreign crews employed was found to be 2.3 to 2.4 persons. The most important reason for hiring (or considering employment) foreign crews was 'high labor costs.' The degree of communication with foreign crews during fishing operation were 'moderate' or 'difficult to direct work.' The most important problem in hiring foreign crews (the first priority) was an 'illegal departure.' As the survey results on the opinion of structural improvement of coastal improved stow net fishing vessel, the degree of satisfaction with fishing vessel structure related to fishing operation was found to be somewhat unsatisfactory, with an average of 3.3 points on a five-point scale. The inconvenient structure of fishing vessel in possession (the first priority), the space needed most for the construction of new fishing vessel (the first priority) and the space considered important for the construction of new fishing vessel (the first prioprity) was a 'fish warehouse.' The most preferred equipment for the construction of new fishing vessel were 'engine operation monitoring' and 'navigation safety devices.' The average size (tonnage class), the average horse power and the average total length of fishing vessel for proper profit and safety fishing operation was between 13.8 and 14.0 tonnes, 808.3 to 819.5 H.P. and 23.4 to 23.5 meters, respectively. The results of the operation status of coastal improved stow net fishery and the requirement for improving the fishing vessel structure are expected to be provided as basic data for reference when we build or improve the fishing vessel.