• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.181-184
• /
• 1999

The purpose of this study is to find on the Current Change and Residual current in Final closing section of Seamangum the sea dike . The M2 current was calculated in two case of the two and three point Final closing section. The residual currents are calculated diagnositically from the observed water temperature and salinity data and wind data and tidal residual current.

• Journal of Construction Engineering and Project Management
• /
• 제3권2호
• /
• pp.49-57
• /
• 2013

A sea dike construction has been increased in Korea because of the actively deployed reclamation project in basis of efficient application in land. The degree of completion in sea dike construction is affected by final closing construction, which has a lot of uncertainty that often results in higher accidents rate. Therefore, this research identified risk factors of final closing construction and classified them. This research examines the likelihood and its impact for each risk factor and calculates the risk degree as to the risk matrix. Based on this, the impact and the environmental conditions that affect to risk factors are investigated and further responsive methods are established for each risk factor. Ultimately, this research attempts to provide the risk retrenchment method for inspectors by proposing risk estimation model, responsive action list, and risk management process.

• 한국수자원학회논문집
• /
• 제37권8호
• /
• pp.613-622
• /
• 2004

Non-Darcy 제체내 침투수 흐름과 배수갑문을 통한 흐름의 특성을 고려한 최종체절의 수리특성분석 모형에 의한 해석결과는 실측자료와 잘 일치하여 개발된 모형의 적용성이 있음을 보여주었다. 실측치와의 비교에서 본간(1985) 식에 의한 계산결과가 나정우(1987)에 의한 방법보다 비교적 정확함을 보여주었다. 아울러 완전 또는 불완전 월류의 구분이 없이 완전월류식에 잠수도를 이용한 유량계수식을 사용한 나정우 식의 사용성을 보여 주었다. 본간 식과 나정우 식에 의한 계산 값이 실측치보다는 유출입 특성이 크게 나타나 현장에서 체절구간의 불규칙적인 단면 양상을 감안한 유량계수의 조정이 필요할 것으로 판단된다. 일반적으로 최종체절의 수리특성 분석에서 제체구간의 침투수 흐름의 고려는 Darcy 흐름에 기초하여 분석하여왔다. 제체내 침투수의 유량과 개방구간을 통과하는 유량의 비가 체절구간이 좁을수록 크게 나타나, 제체내 침투수의 정확한 해석에 의한 체절구간의 수리특성을 분석해야할 필요가 있다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.2151-2155
• /
• 2008

본 연구는 매립공사를 위한 호안 끝물막이 시공에서 최종 물막이 구간의 유속 예측 및 적정 사석규격 및 시공방안을 설계하기 위한 방안을 수립하고자 실시하였다. 호안의 끝물막이 구간과 호안 제체를 통한 해수의 유출입량을 산정하고, 끝물막이 구간의 유속에 저항하기 위한 적정 사석규격의 선정과 점축식과 점고식 시공법중 수리학적으로 유리한 시공방법을 시공일자별 및 시공단계별로 결정 할 수 있게 함에 따라 효율적인 끝물막이 구간의 설계 및 시공관리를 가능하게 하였다. 본 연구에서는 2001년에 대림산업에서 개발된 프로그램을 업그레이드 하여 보다 사용자가 프로그램을 통하여 쉽게 결과값을 사용하고 분석할 수 있도록 하였다. 그 일환으로 User Interface 업그레이드와 아울러 엘셀 호환 및 도움말 기능 등을 추가하였다. 또한 배수갑문 이외에 중소규모 현장에서 적용되는 배수관거를 모의할 수 있도록 기능을 추가하였다. 이밖에 결과값들을 프로그램 자체에서 분석하여 그래프화 하거나 데이터화 하도록 하여 별도의 결과 분석 없이 결과값을 사용할 수 있도록 하였다.

• 한국관개배수논문집
• /
• 제1권1호
• /
• pp.106-125
• /
• 1994

• 한국관개배수논문집
• /
• 제1권2호
• /
• pp.107-117
• /
• 1994

• 한국농공학회지
• /
• 제9권2호
• /
• pp.1343-1356
• /
• 1967

• 자동차안전학회지
• /
• 제5권2호
• /
• pp.51-56
• /
• 2013

In vehicle's door wiring harness (W/H) system is more toward to arrange a passenger compartment than a hinge and a weatherstrip. An opening/closing member of a vehicle is attached to a vehicle by a hinge in a manner enabling easy opening and closing of the opening/closing member. Such members include doors, such as side-doors and rear doors, and other opening/closing members, such as trunk lids. This article gives some insight into the dimensioning process, with special focus on large deflection analysis of wiring harness(W/H) in vehicle's door structures for durability problem. The Finite elements analysis for door wiring harness(W/H) is used for residual stresses and dimensional stability with bending flexible. Durability test data for slam test specimens were compared with the numerical predicted fatigue life for verification. The final testing of the component combines the effects of these microstructural features with the complex stress state arising from the combined service loading and residual stresses.

• 전자공학회논문지S
• /
• 제34S권3호
• /
• pp.84-96
• /
• 1997

In this paper an efficient morphologica algorithm for reducing gaussian and impulse noise in gray-scale image is presented. Based on the edge information the input image is partitioned into a flat region and an edge region, then different algorithms are selectively applied to each region. in case of impulse noise, MGR (morphologica grayscale reconstruction) algorithm with directional SE (structuring element) is applied to the flat region. For theedge region opening-closing (closing-opening) is used instead of dialation (erosion), so that the remaining noise around large objects can be removed. In case of gaussian noise, 5*5 OCCO(opening closing closing opening) and 3*3 DMF(directional morphological filter ) are used for the flat region and the edgeregion, respectively. In order to remove discontinuity at the edge boundary, the algorithm uses 3*3 OCCO around the edge region to reconstruct the final image. Experimetnal results have shown that the proposed algorithm achieves a high performance in terms of noise removal, detail preservation, and NMSE.

• 대한의용생체공학회:의공학회지
• /
• 제13권4호
• /
• pp.285-298
• /
• 1992

An analysis of the dynamics in the closing phase of the occluder of a mechanical monoleaflet heart valve prosthesis is presented. The dynamic analysis of the fluid in the vicinity of the occluder was based on the control vo]use approach. The backflow velocity of the fluid was computed by applying the continuity, Bernoulli's and momentum equations in the unsteady state. By considering the fluid pressure and gravity as external forces acting on the occluder, the moment equilibrium on fine occluder was employed to analyze the motion of the occluder during closing and the force of impact between the occluder and the guiding struts. Occluder comes to rest after several oscillations in about 10-18 msec after the Inltiaton of closing. As the aortic pressure increases, the occludes closes faster and comes to the final resting position earlier and the impact force increases also. But backflow is not af footed by the variation of the aortic pressure. With decreasing time delay of the ventricle pressure, the occluder closes faster and impact force Increases. The computed magnitudes of the occluder tiP velocities as well as the backflow of the fluid during the closing phase using this model were in agreement with previously reported experimental measurements.