• 상하수도학회지
• /
• 제23권2호
• /
• pp.207-214
• /
• 2009

This study examines the optimum filtration conditions in pretreatment of seawater desalination by reverse osmosis. For this purpose, Masan bay seawater is treated through a gravity filter column while $FeCl_3$ is added as coagulant. The conditions of coagulantd osage, media depth, filtration rate, and backwash time are evaluated. The study results show that the filtrate quality improved with increasing coagulant dosage, but head loss rapidly increased. After 4mg/L, the unit filter run volume reduced to less than $200m^3/m^2$. Considering the head loss development, 4mg/L is determined as the optimum dosage. The better filtrate qualities are obtained with depth of 100cm than that of 80cm. The two stage filtration, which outperformed the single stage filtration, is suggested for treatment of Masan bay. The filtration rate of 5m/h is decided as the optimum condition considering the head loss development. At 10m/h, the filtrate quality deteriorated even though the extent was minimal, and head loss increased rapidly. The backwash time of 10 min is decided appropriate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1684-1699
• /
• 2017

The deblocking filter (DF) reduces blocking artifacts in encoded video sequences, and thereby significantly improves the subjective and objective quality of videos. Statistics show that the DF accounts for 5-18% of the total decoding time in high-efficiency video coding. Therefore, speeding up the DF will improve codec performance, especially for the decoder. In view of the rapid development of multicore technology, we propose a parallel DF scheme based on a modified order of accessing the coding tree units (CTUs) by analyzing the data dependencies between adjacent CTUs. This enables the DF to run in parallel, providing accelerated performance and more flexibility in the degree of parallelism, as well as finer parallel granularity. We additionally solve the problems of variable privatization and thread synchronization in the parallelization of the DF. Finally, the DF module is parallelized based on the HM16.1 reference software using OpenMP technology. The acceleration performance is experimentally tested under various numbers of cores, and the results show that the proposed scheme is very effective at speeding up the DF.

• 상하수도학회지
• /
• 제18권2호
• /
• pp.254-269
• /
• 2004

Polysilicato-iron coagulant (PSI) is receiving attention in Japan as a substitute for aluminum-based coagulants. In the first part of this article, coagulation, sedimentation and filtration experiments were carried out using kaolin clay particles as the turbidizing material and four types of PSI with various molar ratios of polysilicic acid to ferric chloride (Si/Fe ratio). Results demonstrate that use of a PSI with a high Si/Fe ratio can cause a more dramatic decrease in treated water turbidity but a higher suction time ratio (STR) than when PACl is used. However, optimization by increasing the rapid agitation strength GR is found to greatly improve the STR. In addition, the series of filtration experiments verified that optimization of GR is greatly effective in controlling rapid increases in filter head loss, and also formation of a thin aging layer in the upper part of the filter bed by slow-start filtration is effective in improving filtered water turbidity over the entire filtration process. The second part of this article describes two innovative filtration techniques to increase the particle separation efficiency; (1) coagulant-coated filter medium by enhancing the electrical potential of the surface of the filter medium, and (2) coagulant dosing in influent by controlling the electrical potential of particles entering the filter layer. From the results of the various filtration experiments using a pilot plant, these two techniques were found to be very effective to reduce the effluent water turbidity from the start to the end of a filter run. Moreover, in the filtration experiments using these two methods simultaneously, higher removal efficiency of approximately 3-log (99.7%) was realized, resulting that the finished water turbidity was accordingly reduced to 0.004mg/L.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1123-1126
• /
• 1999

In this paper, we propose a real-time implementation of the MPEG-1 layer III and MPEG-2 layer III LSF audio decoding system based on OAK DSP Core. In order to solve the problem of resolution, the system has been used floating-point operation and double precision in dequantization module. The size of ROM is reduced by using the Run-length algorithm of reordered index. The subband synthesis filter module is optimized to have low computational complexity in terms of the size of ROM or RAM. To construct a efficient system, we used both the DSP Core and Parser-Huffman decoder which is implemented with VHDL.

• Journal of Pharmaceutical Investigation
• /
• 제30권1호
• /
• pp.51-54
• /
• 2000

A column-switching high performance liquid chromatographic method has been developed for the determination of a fluconazole in human plasma. Each plasma sample was centrifuged for 10 min at 5000 g. After an aliqout of the supernatant was taken to nylon microcentrifuge filter, these samples were centrifuged for 10 min at 5000 g. An aliqout of the supernatant was injected directly onto the HPLC column. Deionized water was run for 2 min at a flow rate of 1.0 ml/min to retain fluconazole in an extration column, while proteins and endogenous interferences were eluted to the waste. The analyte was then back-flushed onto an analytical column, $C_{18}$ reversed-phase column. The mobile phase for analytical column, 0.01 M sodium acetate (pH 5.0)-methanol (65:35, v/v), was run at a flow rate of 1.0 ml/min. The column effluent was monitored by ultraviolet detection at 261 nm. The retention time for fluconazole was 11.76 min in human plasma. The detection limit for fluconazole in human plasma was $0.2\;{\mu}g/ml$. No interference from endogenous substances was observed.

• 디지털콘텐츠학회 논문지
• /
• 제19권6호
• /
• pp.1207-1212
• /
• 2018

초음파 영상은 초음파 펄스를 이용해 반사파를 수신하여 진단에 필요한 영상을 구성하는데 신호가 약해 질 경우, 잡음이 발생하여 미세한 명암도 차이가 발생한다. 또한 초음파 영상의 특성인 호흡에 의한 흔들림 현상과 실시간으로 변화하는 움직임에서 영상의 밝기 변화가 발생한다. 이와 같은 노이즈로 인해 임상적 병변을 육안으로 판단하고 진단하는데 어려움이 있다. 본 논문에서는 초음파 획득한 이미지에 영상처리 기법을 이용하여 형태학적 특징을 자동 추출한다. 이 논문에서는 영상처리를 위해 클라우드 빅데이터 처리 플랫폼을 활용해 GPU기반의 빠른 필터를 구현하였다. GPU 기반의 고성능 필터의 적용시 CPU 기반보다 4.7배 빠른 성능으로 알고리즘이 동작되었고 PSNR이 37.2dB로 원본과 매우 유사함을 확인하였다.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.460-475
• /
• 2018

In the variable-speed wind energy system, to achieve maximum power point tracking (MPPT), the wind turbine should run close to its optimal angular speed according to the wind speed. Non-linear control methods that consider the dynamic behavior of wind speed are generally used to provide maximum power and improved efficiency. In this perspective, the mechanical power is estimated using Kalman filter. And then, from the estimated mechanical power, the wind speed is estimated with Newton-Raphson method to achieve maximum power without anemometer. However, the blade shape and air density get changed with time and the generator efficiency is also degraded. This results in incorrect estimation of wind speed and MPPT. It causes not only the power loss but also incorrect wind resource assessment of site. In this paper, the adaptive maximum power point tracking control algorithm for wind turbine system based on the estimation of wind speed is proposed. The proposed method applies correction factor to wind turbine system to have accurate wind speed estimation for exact MPPT. The proposed method is validated with numerical simulations and the results show an improved performance.

• 한국전자파학회논문지
• /
• 제13권2호
• /
• pp.217-224
• /
• 2002

FDTD 해석법에서 공간적 셀의 크기는 해석의 정확도를 결정하는 중요한 요소이다. 하지만 정확도를 향상시키기 위하여 진의 크기를 줄이게 되면, 해석시간과 기억용량의 증가를 초래하게 되는데 서브 그리딩을 사용하여 이를 해결할 수 있다. 본 논문에서는 관심영역만 세밀하게 해석할 수 있는 3차원 서브 그리딩법을 기술하고 이를 응용하여 몇 가지의 구조를 해석하였다. 제안한 방범의 타당성을 화인하기 위하여 균일 그리딩과 서브 그리딩을 적용하여 특성을 해석하고 그 격과를 비교하였다. 제안한 방법을 사용하였을 경우 동일한 정확도에서 균일 그리딩에 비하여 6배의 해석시간의 줄었고 기억용량은 2.5배 정도 줄어들었다.

• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1551-1558
• /
• 2015

In Korea, many drinking water treatment plants (DWTPs) have introduced and are going to introduce biological activated carbon (BAC) process to treated dissolved organic matter (DOM) in water which are difficult to control by conventional water treatment processes. Even though more decade have passed since introduced BAC in Korea, most of BAC operating method was followed to the modified sand filter operating manuals. In case of BAC backwashing, many DWTPs set the periods of backwashing about 3~5 days. In this study, we have collected data to set the proper BAC backwashing periods from both pilot-plant and real DWTPs. We had measured heterotrophic plate count (HPC), turbidity, water temperature, dissolved organic carbon (DOC) and headloss from just after backwashing to the next backwashing time for two years. Considering water quality factors, the BAC run time from backwashing to the next backwashing could extend more 30 days without water quality deterioration if the head loss do not reach the limited level which depends on each BAC facilities' condition. It means the BAC treated water could be saved in the proportion of extended the backwashing period to the existing backwashing period.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.398-403
• /
• 2004

The demand of high speed machining is increasing because the high speed cutting providers high efficiency of process, short process time, improved metal removal capacity and better surface finish. Active magnetic bearings allow much high surface speed than conventional ball bearings and therefore greatly suitable for high speed cutting. The automatic control concept of magnetic bearing system provides ability of intelligent control of spindle system to increase accuracy and flexibility by means of adaptive vibration control. This paper describes a design and development of a milling spindle system which includes built-in motor with power 5.5㎾ and maximum speed 70,000rpm, HSK-32C tool holer and active magnetic bearing system. Magnetic actuators are designed for satisfying static load condition. The Performances of manufactured spindle system was examined for its static and dynamic stiffness, load capacity, and rotational accuracy. This spindle was run up to 70,000 rpm stably, which is 3.5 million DmN.