• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.307-308
• /
• 2006

In this paper, we propose an ultra wideband pass filter of ring type with embedded stripline stub. The fractional bandwidth was 98 % at the center frequency of 8 GHz and insertion loss was below 1 dB in passband. Two kinds of dielectric materials with the permittivity of 7.8 and 40, respectively were adopted in evaluating the suggested filter structure. As the permittivity of material became larger, the size of filter smaller as expected without any sacrifice in filter performance. In summary, the suggested filter structure has smaller size due to the embedded stripline stub and can be minimized by adopting dielectric material with higher permittivity again.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.597-598
• /
• 2006

Gas filtration at high temperature from industrial processes offers various advantages such as increasing process efficiency, improving heat recovery and materials resource recovery, etc. At the same time, it is an advanced environment protection technology. This paper describes a newly developed metallic filter element. The manufacturing process of sintered $Fe_3Al$ metallic powder and the mechanical and filtration characteristics of this filter element were investigated. In this work, the phase constituent changes of the $Fe_3Al$ powder during sintering were studied. The newly developed filter elements were found to have excellent corrosion resistance, good thermal resistance, high strength and high filtration efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1497-1500
• /
• 2006

Inkjet printing technology can reduce the LCD color filter manufacturing cost more than 50 %. Uniform color filter patterning can be achieved only with proper ink and barrier materials. We developed new ink and black matrix materials for inkjet color filter. The ink materials have low volatility while they have very high solid content. The black matrix materials have very precisely controlled surface energy so that the inks can fill the pixels evenly and completely. We controlled the ink drop volume and ink material to minimize the thickness difference between the black matrix and the color pixel. Micron-order jetting position accuracy was achieved. We successfully printed 14.1" color filters using our ink and black matrix materials.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.45-46
• /
• 2006

An ultrawide bandpass filter with sharp rejection and wider stopband is designed and implemented using multilayer ceramic configuration. The proposed filter is composed of a broadside coupled structure and a ring type filter with an embedded stripline stub. The measured results show that the fractional bandwidth and upper stopband of the proposed filter are 106 % and better than -30 dB, respectively. The insertion loss is less than 1 dB, and group delay is less than 0.3 ns in the passband. In addition, ring and broadside coupled gap structures are characterized and compared to the proposed structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1469-1471
• /
• 2009

Effect of contamination of liquid crystal on the electrical behavior of liquid crystal display (LCD) by spilled components from color filter layer was investigated. It is noted that the level of contamination was different following the kind of liquid crystal and organic layers. Transmittance curve of LCD cell was shifted by spilled components of color filter and BM materials. C-V curve also showed different behavior following color filter type. The results obtained show the image sticking of LCD can be varied by pairing liquid crystal with color filter materials.

• Journal of Korean Society of societal Security
• /
• v.1 no.4
• /
• pp.65-71
• /
• 2008

This paper presents the characteristics of internal erosion of embankment slopes due to the localized heavy rain. In this study, the existing analysis methods of filter performance in embankment materials were reviewed. Based on the theoretical concept of filter conditions to prevent particles from being carried in from the adjacent embankment materials, new analysis method was suggested. According to the new analysis method for filter performance, experimental programs were carried out to investigate the filter performance for controlling and sealing any leak which develops through the embankment materials as a result of internal erosion. Three sets of small scale laboratory tests were carried out with changing the main influence factors such as rainfall intensity, gradient of slope, embankment material condition. It was found that the new analysis method for filter performance to prevent particles from being carried in from the adjacent embankment materials was more capable approach to design the filter materials in embankment slopes. The new criterion or method for satisfactory filter performance, therefore, was recommended.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.662-667
• /
• 2009

Porous SiC candle filter preforms were fabricated by extrusion and ramming process. To fabricate SiC candle filter preform, commercially available 85 ${\mu}m\;{\alpha}-$-SiC powder and 44 ${\mu}m$ mullite, CaC$O_3$ powder were used as the starting materials. The candle type preforms were fabricated by vacuum extrusion and ramming process, and sintered at $1400{^{\circ}C}$ 2 h in air atmosphere. The effect of forming method on porosity, density, strength (flexural and compressive strength) and microstructure was investigated. Also, corrosion test of the sintered candle filter specimens as forming method was performed at $600{^{\circ}C}$ in IGCC syngas atmosphere. The sintered SiC filter which was formed by ramming process has more higher density and exhibit higher strength than extruded filter. Its maximum density and 3-point bending strength were 2.00 g/$cm^3$ and 45 MPa, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.673-676
• /
• 2009

Non-point pollutants, which mainly originate from high traffic roads and rural areas, contaminate the environment by flowing into various rivers and lakes and thus are of interest as an environmental issue. Accordingly, efforts have been made to design and maintain efficient filter systems for the control of the non-point pollutants. Meanwhile, clay-type materials are widely used for the absorption of chemicals included in pollutants and the absorption performances of various clays have been reported in the literature. Thus, the present study proposes a non-destructive monitoring method for the performance of a clay-type filter using electrical resistivity measurement. A series of experimental tests is performed on celite-based particulate filters with infiltrating non-point source pollutants having the same characteristics as pollutants on high traffic roads. Each test measures permeability, resistivity of the filter materials and resistivity of the filtrated water. As the particulate filter materials filtrate pollutants and absorb heavy chemicals (e.g., $Cr^{6+}$, lead, nickel, among others), ionic concentration increases resulting as the electrical resistivity decrease. When the filter systems approach the end of their lifetime, the electrical resistivity of the filter material converges to a very low value due to lowered filter absorption efficiency. Hence, the electrical resistivity of the filtrated water also converges to a low value due to high concentrations of heavy metals. The permeability converges to a very low value because of significantly reduced porosity due to clogging and absorption of pollutants on the filter material. The experimental results show that electrical resistivity monitoring of filter materials is a promising approach to estimation of filter performance and its life expectancy.

• Korean Journal of Materials Research
• /
• v.14 no.7
• /
• pp.470-476
• /
• 2004

The fail safety filter is an assistant filter element to be mounted in order to intercept the particles leaked when the main filter elements are broken. So it should have two contrary functions of being plugged easily to meet the purpose of dust sealing and a high permeability to save the space. The permeability of the metal filter elements were effectively controlled by the following factor: powder size(53-840 ${\mu}m$) and applied pressure(1000-2000 $kgf/cm^2$), and then the compact were sintered for 1 hour at $1200^{\circ}C$ in vacuum sintering furnace. The sintered metal filters was evaluated for the function of the fail safety filter in an experimental unit. The maximum allowable particle size was 420-840 ${\mu}m$, when a CIP pressure of 1500 $kgf/cm^2$ was applied reveals a permeability of about $1.2{\times}10^{10}m^2$ and pore size of about 60 ${\mu}m$. The metal filter produced with stainless steel powder of 480-840 ${\mu}m$ size, which presented excellent permeability than commercial ceramic filter element and plugged with in 3 minutes with the leak of the maximum particle size less than 3 ${\mu}m$.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.75-82
• /
• 2005

This work investigated biodegradability for the cellulose acetate, carbon dual, paper and web used to cigarette filter materials by soil test. Also, because of demanded a lot of the time and effort in case of soil test, the possibility of biodegradation by enzyme was studied. The evaluation of degradation for the filter materials by soil test was examined with the naked eye, electron microscopy and weight loss. The biodegradability according to the filter materials was represented in the order of paper > web > carbon dual > cellulose acetate without relating to the evaluation methods. Experiment of biodegradability by the cellulase(E C 3.2.1.4, Trichoderma viride) among the several biodegradability enzymes was demanded reaction time of the $5\~10$ hours and represented the same result with that of soil test.