• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.418-421
• /
• 2001

The ceramic filters were developed using technology similar to that of quartz crystal and electromechanical filter. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emhpasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations. Nakazawa developed a double-mode resonator as two acoustically coupled single resonators. And he developed 10.7MHz crystal filters using multi-energy trapping mode of thickness shear vibration. He succeeded in realizing a two-pole band pass filter response without external inductance by splitting a dot electrode to creat coupled symmetric and antisymmetric vibration modes. Accordingly, the simulation for ceramic filter were important. So that, this paper were investigated the pass frequency of filter on the electrode length and thickness of ceramic.

• 한국전기전자재료학회논문지
• /
• 제23권10호
• /
• pp.820-825
• /
• 2010

In this study, we intended to design the optimal Fermi filter to apply the k-space date that is knee image of the rheumatoid arthritis patient acquired from the MRI (magnetic resonance imaging) instrument. After deciding the suitable coefficient for the Fermi filter, the results were compared with modified Fermi filter and inverse Chebyshev filter, Chebyshev filter, Elliptic filter and Butterworth filter. Firstly, in comparison to the results, the radiologist confirmed that modified Fermi filter was best decision for boundary of the rheumatoid arthritis images. The number of the black voxels of the histogram showed the quantity of the results. At the proposed filter images, numbers of the blacks voxels were statistically decreased. That meant voxels only appeared the black color were changed to others voxels color. Because the number of the total voxels was fixed, the area appeared block color could be effected to the other areas. If the modified Fermi filter were used for rheumatoid arthritis patient, the result will be better than other filters.

• 한국ITS학회 논문지
• /
• 제9권4호
• /
• pp.22-31
• /
• 2010

본 논문에서는 메타 인공 물질을 이용한 스플릿 링 공진기를 새롭게 제안하여 2단 필터를 설계 하였다. 제안된 필터는 새로운 공진기의 크기를 자유롭게 조절할 수가 있고, 탭-선로의 위치를 이용하여 대역폭을 쉽게 조절할 수가 있다. 제안된 공진기 및 필터는 군사용 위성통신 대역인 I-밴드의 10 GHz 중심 주파수에서, 공진기의 Qe값은 184이며, 필터의 대폭은 10 %이고, 삽입손실 및 반사손실은 각각 1.43 dB 와 16.8 dB의 값을 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1554-1561
• /
• 2005

Geotextiles form one of the two largest groups of geosynthetics and it is consisted two major types of synthetic material (Woven, Non-woven). The functions of geotextiles are separation, reinforcement, filtration, drainage and as a moisture barrier. Within these functions, however, there are a large number of applications or use areas. Although the many research scholar and engineer developed and established the design criteria and construction methodology of geosynthetics filter layer, because the lack of suitable design terminology and uncertainty of long term durability, sustainable research still needed for optimum design methodology to the complicate field conditions. Especially, more intensive research needed about under the cyclic flow condition and fine silty sand base material. In this paper, the filter model test performed under cyclic flow with various boundary conditions (period and frequency of cyclic flow, types of geosynthetic filter material, surcharge etc.).

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.903-909
• /
• 2012

This study analyzed the temperature distribution in DPF with five partitioned electric heaters. The temperature distribution in DPF is an important design factor for regeneration and durability of filter. The design Factors that influence the temperature distribution in DPF there are several. In this study, the characteristics of temperature distribution in DPF were analyzed according to the following changes. First, the thermal conductivity of the filter was analyzed about effect on the durability of the filter. Second, the length from exhaust manifold to inlet of DPF was analyzed about effect on the temperature distribution in DPF. The boundary conditions of analysis has been verified with comparison to the results of existing experimental study and the numerical analysis. Based on the identified boundary condition, on assuming the condition of the actual driving, the temperature distribution in DPF was analyzed according to material properties of filter and the position of DPF.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1261-1267
• /
• 2003

Since the grating optical low-pass fillet degrades the resolution of images, we developed a hologram optical low-pass filter that show low degradation of the image and studied its characteristics. We designed the hologram that divides input beam into circular shaped 21 beams with a Monte-Carlo based hologram generation program and calculated its MTE characteristics to compare it with that of a grating filter. The hologram was manufactured through the optical lithography process and attached to a digital imaging device (Zoran 732212) for measurement. The moirfiltering is compared with zone plate images and the resolution loss is measured with USAF resolution chart. The hologram optical low-pass filter showed better characteristics in both moly filtering and resolution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.155-158
• /
• 1999

Because the traditional filters have many demerits, multi-step electric oil filter have manufactured the efficiency of insulating oil to improve. Therefore, the function of oil filter to improve based on my experience and know-how about my job. Through this study have obtained many merits. The efficiency of insulating oil is improved. The waste oil reused in repair works of the damaged transformer. Multi-step filter is shortening the working time and safety. it is handy for use and movement. This study lengthen the expected life span of filter. The improvement of oil filter bring about elevation of productivity.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.598-601
• /
• 2004

A microstrip filter has been designed and fabricated in hairpin form on a GaAs substrate and its characteristics such as the insertion loss, return loss, and bandwidth have been investigated. The presented filter is realized with relatively small size, 4.5 by 3.6 mm. The insertion loss and return loss of the filter are 1.17 dB and 30 dB, respectively. The filter exhibits 3 dB-bandwidth of 350 MHz at the center frequency, 5.890 GHz. The experimental results show good agreement with the numerical ones. However, the measured center frequency is about 100 MHz higher than the designed one.

• Applied Microscopy
• /
• 제48권4호
• /
• pp.132-133
• /
• 2018

One of the most important factors determining the properties of a material is its grain size. However, unclear grain boundaries in the image hinder an accurate measurement of grain size. We demonstrate that grain boundaries existing in the images obtained by scanning transmission electron microscopy (STEM) can be clearly distinguished by applying a Sobel filter to a tilting series of STEM images of a hydrogenation-disproportionation-desorption-recombination processed Nd2Fe14B magnet sample.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.136-136
• /
• 2009

It is investigated the cut-off frequency of Z-cut quartz microstrip low pass filter by the variation of applied electric field. Designed microstrip filter was simulated using the Ensemble v7.0(Ansoft). As a result of the experiment, the cut-off frequency showed 50 MHz shift when the applied electric field was 3 kV/cm.