• Restorative Dentistry and Endodontics
• /
• 제43권1호
• /
• pp.5.1-5.9
• /
• 2018

Objectives: This study evaluated the amount of remaining root canal filling materials after retreatment procedures performed by undergraduate students using manual, rotary, and reciprocating techniques through micro-computed tomographic analysis. The incidence of instrument fracture and the instrumentation time were also evaluated. Materials and Methods: Thirty maxillary single rooted teeth were prepared with Reciproc R25 files and filled with gutta-percha and AH Plus sealer by the continuous wave of condensation technique. Then, the specimens were assigned to 3 groups (n = 10), according to the retreatment technique used: manual, rotary, and reciprocating groups, which used K-file, Mtwo retreatment file, and Reciproc file, respectively. Retreatments were performed by undergraduate students. The sample was scanned after root canal filling and retreatment procedures, and the images of the canals were examined to quantify the amount of remaining filling material. The incidence of instrument fracture and the instrumentation time were recorded. Results: Remaining filling material was observed in all specimens regardless of the technique used. The mean volume of remaining material was significantly lower in the Reciproc group than in the manual K-file and Mtwo retreatment groups (p < 0.05). The time required to achieve a satisfactory removal of canal filling material and refinement was significantly lower in the Mtwo retreatment and Reciproc groups (p < 0.05) when compared to the manual K-file group. No instrument fracture was observed in any of the groups. Conclusions: Reciproc was the most effective instrument in the removal of canal fillings after retreatments performed by undergraduate students.

• 보존과학회지
• /
• 제25권2호
• /
• pp.131-145
• /
• 2009

고령 양전동암각화는 녹색 사암으로 구성된 너비 6m 높이 3m의 암반의 절리면에 겹동그라미(3점)와 방패무늬(30점)의 그림들이 있다. 구성암석의 주 구성광물은 석영, 장석 및 녹니석이며, 교질물인 점토광물 중 녹니석이 대부분이나 일라이트와 소량의 방해석도 산출된다. 이들 점토광물들은 구성광물을 피복 및 성분을 교대하거나 공극을 충진하는 양상으로 산출된다. 수용성 염과 암석의 풍화현상과의 관계를 포함한 훼손양상과 암각화가 그려진 암반의 사면안정성을 조사하였다. 훼손양상은 주로 표면박리, 입자박락, 균열 및 파손 등이다. 그리고 절리와 균열이 발달한 암반은 낙석의 가능성이 있는 것으로 해석된다. 보존을 위해서는 균열 및 파손 부위에 대한 접착처리와 약해진 표면층에 강화처리가 필요하다.

• 자원환경지질
• /
• 제15권4호
• /
• pp.189-204
• /
• 1982

The Geodo mine is located in the southern limb of the Hambaeg syncline. Geology of the area consists of Paleozoic-Mesozoic sedimentary Rocks and Cretaceous igneous rocks. The important igneous rocks presumably related to skarnization and ore mineralization in the area, are the early granodiorite and the late porphyritic granodiorite. Two mineralogical types of ore deposits are recognized in the area. They are the Fe-Cu deposits in the Myobong formation and the Au-Bi-Cu deposits in the Hwajeol formation. Contact metamorphism due to granodiorite intrusion includes hornfelsization, exoskarnization and endoskarnization. Wall-rock alterations related to the Fe mineralization are grouped into the hydrothermal replacement skarnization and the hydrothermal filling skarnization. Another hydrothermal alteration is associated with the Cu mineralization. Various mineralogical analyses have been applied for the identification of minerals. They include optical microscopy, chemical analysis, etching test, X-ray diffraction, and infrared absorption spectroscopic analyses. The ore minerals in these ore deposits are classified into two groups;hypogene and supergene minerals. Hypogene minerals consist of magnetite, pyrite, chalcopyrite, and chalcocite. Supergene minerals consist of chalcocite, bornite, and geothite. Ore minerals show various kinds of ore texture: open-space filling, exsolution, replacement, and cementation texture. The gangue minerals consist of quartz, diopside, epidote, garnet and plagioclase in the hornfelsic zone, garnet, diopside, scapolite, actinolite, sericite, chlorite, quartz, and calcite in the skarn zone, and, epidote, chlorite, sericite, quartz, and calcite in the late hydrothermal alteration zone. This study shows that the Fe-Cu deposits are of metasomatic pipe type with the later hydrothermal fillings, and the Au-Bi-Cu deposits are of hydrothermal fissure-filling type. The mineralization is probably related to the intrusion of porphyritic granite.

• Journal of Korean Neurosurgical Society
• /
• 제49권5호
• /
• pp.273-277
• /
• 2011

Objective : A single balloon extrapedicular kyphoplasty has been introduced as one of the unilateral approaches for thoracic compression fractures; however, the unilateral extrapedicular technique in the lumbar area needs a further understanding of structures in the lumbar area. The purpose of the present study is to describe methods and pitfalls of this procedure based on the anatomy of the lumbar area and to analyze clinical outcome and complications. Methods : Anatomical evaluation was performed with 2 human cadavers. A retrospective review of unilateral extrapedicular approaches yielded 74 vertebral levels in 55 patients that were treated with unilateral extrapedicular vertebroplasty and kyphoplasty. Radiographic assessment included the restoration rate of vertebral height and correction of kyphosis. Results : Anatomical evaluation indicates that the safe needle entry zone of bone for the extrapedicular approach was located in the supero-lateral aspect of the junction between the pedicle and vertebral body. The unilateral extrapedicular procedure achieved adequate pain relief with a mean decreases in pain severity of $7.25{\pm}1.5$ and $2.0{\pm}1.4$, respectively. Complications were 1 retroperitoneal hematoma, 6 unilateral fillings and 3 epidural leak of the polymethylmethacrylate. Conclusion : The method of a unilateral extrapedicular approach in kyphoplasty and vertebroplasty in the lumbar area might be similar to that in thoracic approach using a route via the extrapedicular space. However, different anatomical characteristics of the lumbar area should be considered.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.739-750
• /
• 1997

Treatment of root perforation elicits special considerations due to its blood-contaminated circumstances. It is known that conventional dental restorative materials are all leaking. Calcium sulfate is the material which react with water to become chemically set. This study, therefore, was performed to develop a new compound containing calcium sulfate and to evaluate its physical and biological characteristics. Three materials were used, IRM, calcium sulfate, calcium sulfate-hydroxyapatite compound. The composition of the calcium sulfate-hydroxyapatite compound was basically 50 % of calcium sulfate and 50 % of hydroxyapatite mixed with guajacol. The materials were mixed in conventional way and underwent four physical test procedures, setting time, solubility test, compressive strength, and marginal leakage test. All materials were evaluated under the scanning electron microscope to examine the marginal sealing ability. Animal experiment was also performed to test the materials' tissue response. Twenty-four dog's premolars were tested with either furcation perforations or apical retro-fillings. From the results, we found that calcium sulfate possess the good marginal sealing ability. However, calcium sulfate creates many voids which is caused by crystal thrusting action when it reacts with water. It seemed that the voids caused disintegration of the material which eventually lead to tissue reaction. By compounding calcium sulfate and hydroxyapatite, we were able to obtain the better physical properties but it showed larger marginal gap between the material and the root surface. Within the six weeks observation period, both IRM and calcium sulfate-hydroxyapatite compound showed good tissue responses in animal experiment. It is concluded that calcium sulfate would be the material of choice in root perforation repair, but the physical property needs to be further improved.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• 대한심미치과학회지
• /
• 제4권1호
• /
• pp.12-22
• /
• 1995

The purposes of this study were to compare the bleaching efficacy of sodium perborate when mixed either with Superoxol or distilled water and to evaluate the efficacy of different location of intracoronal base on the presence of apical leakage of tested bleaching agents. Forty eight extracted human permanent incisors were stained via whole blood and canal fillings with conventional gutta percha were performed after routine biomechanical perparations. The experimental intracoronal base was placed either at the cementoenamel junction(group 3, 4) or 2mm below cementoenamel junction(group 1, 2). Walking bleaching was performed by two different combinations of bleaching agents : sodium perborate with distilled water in group 1, 3 and sodium perbrate with Superoxol in group 2, 4. The roots of the teeth were evaluated for the presence of color change to assess the leakage of bleaching agents and the cervical one-thirds of the crown were evaluated for bleaching effect from the whiteness Indea calculated by spectrophotometer. The results were as follows : 1. At the end of 12 days, all the sample teeth demonstrated the increase of Whiteness Index at cervical 1/3 of crown although there were some minor differences among groups. 2. Regardless of location of the base, sodium perborate with superoxol(group 2, 4) showed better results in bleaching than the sodium perborate with distilled water(group 1, 3). 3. Bleaching agent leaked into the root area when the base was placed 2mm below cementoenamel junction but no leakage was found when the base was placed at the cementoenamel junction.

• 복식
• /
• 제61권8호
• /
• pp.73-84
• /
• 2011

Upholstery style is the form which bulges a shape by putting fillings in the support and covering them with patterned textile or pile fabric. Modern upholstery style was combined with the various socio-cultural products and artistic styles and expressed in interior furniture and costumes of historical time periods. The style first originated when people built houses for settlement and made furniture to decorate its interior. The characteristics of upholstery style came to be prominent in the Renaissance, Baroque and Rococo times with the development of science and textile industry. The interior furniture represented the ages of the Renaissance, Baroque and Rococo and were made with similar images of the architectural style from those different time periods. Textiles, tapestry, velvet, corduroy, damask, brocade, and the most frequently used velvet are elements that make up the structural and figurative features of the architectural style. The upholstery style of furniture also shows the forms of clothing that represents each of the different periods. This style still continues to be used today. In modern day fashion, the figurative characteristics of the upholstery style that derives from interior furniture and clothing from the different time periods are bulkiness, asymmetry and exoticism. Such figurative characteristics have evolved through the combination of diverse genres but it still maintains similar designs and forms.

• 한국임상약학회지
• /
• 제24권4호
• /
• pp.272-281
• /
• 2014

Objective: The provision of pharmaceutical care service in compliance with good pharmacy practice (GPP) standards is important, but there is lack of studies to investigate the barriers that significantly hinder community pharmacies in Korea from adhering to the standards. This study was aimed to identify the major barriers to provision of pharmaceutical care service in compliance with the proposed pharmacy practice standards which have been developed based on the GPP standards recommended jointly by WHO and FIP. Methods: Questionnaires reviewed by the expert committee were posted for 32 days on the website which is most frequently accessed by community pharmacists. The respondents completed them by checking the scores (Max=5, Min=1) for major barriers to provision of pharmaceutical care service focusing on patient information management and drug use review process in prescription fillings. The answered scores were automatically collected using online data processing. Mean differences between scored data were assessed by ANOVA. Results: Total 321 pharmacists participated in the survey. Results indicated that 'difficulty of diagnosis identification' (m=3.92, SD=1.21), 'lack of time' (m=3.48, SD=1.22) and 'lack of updated clinical information' (m=3.17, SD=1.10) were the major barriers to provision of pharmaceutical care service in patient information management. The main barriers to drug utilization review were 'lack of time' (m=3.32, SD=1.21), 'lack of updated clinical information' (m=3.11, SD=1.17), and 'negative feedbacks or refusals from prescribers' (m=3.00, SD=1.38). There were significant differences among the groups by location, employed number of pharmacists and acceptability to the proposed GPP standards. Conclusion: Difficulties in managing patient clinical information and lack of time were found to be the major barriers in providing pharmaceutical care services in community pharmacies in Korea. Further research is recommended to determine ways to reduce these barriers in order to provide quality pharmaceutical care service that is in compliance with the internationally recognized GPP guidelines.

• Restorative Dentistry and Endodontics
• /
• 제39권1호
• /
• pp.24-31
• /
• 2014

Objectives: The purpose of present study was to evaluate the internal adaptation of composite restorations using different adhesive systems. Materials and Methods: Typical class I cavities were prepared in 32 human third molars. The teeth were divided into the following four groups: 3-step etch-and-rinse, 2-step etch-and-rinse, 2-step self-etch and 1-step self-etch system were used. After the dentin adhesives were applied, composite resins were filled and light-cured in two layers. Then, silver nitrate solution was infiltrated, and all of the samples were scanned by micro-CT before and after thermo-mechanical load cycling. For each image, the length to which silver nitrate infiltrated, as a percentage of the whole pulpal floor length, was calculated (%SP). To evaluate the internal adaptation using conventional method, the samples were cut into 3 pieces by two sectioning at an interval of 1 mm in the middle of the cavity and they were dyed with Rhodamine-B. The cross sections of the specimens were examined by stereomicroscope. The lengths of the parts where actual leakage was shown were measured and calculated as a percentage of real leakage (%RP). The values for %SP and %RP were compared. Results: After thermo-mechanical loading, all specimens showed significantly increased %SP compared to before thermo-mechanical loading and 1-step self-etch system had the highest %SP (p < 0.05). There was a tendency for %SP and %RP to show similar microleakage percentage depending on its sectioning. Conclusions: After thermo-mechanical load cycling, there were differences in internal adaptation among the groups using different adhesive systems.