• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.101-121
• /
• 2010

This paper presents an intelligent prefetching technique that significantly improves performance of hybrid fash-disk storage, a combination of flash memory and hard disk. Since flash memory embedded in a hybrid device is much faster than hard disk in terms of I/O operations, it can be utilized as a 'cache' space to improve system performance. The basic strategy for prefetching is to utilize sequential pattern mining, with which we can extract the access patterns of objects from historical access sequences. We use two techniques for enhancing the performance of hybrid storage with prefetching. One of them is to modify a FAST algorithm for mapping the flash memory. The other is to extend the unit of prefetching to a block level as well as a file level for effectively utilizing flash memory space. For evaluating the proposed technique, we perform the experiments using the synthetic data and real UCC data, and prove the usability of our technique.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.932-935
• /
• 2002

In this paper, we introduce new FTL(Flash Translation Layer) driver algorithm that tolerate the power off errors. FTL driver is the software that provide the block device interface to the upper layer software such as file systems or application programs that using the flash memory as a block device interfaced storage. Usually, the flash memory is used as the storage devices of the mobile system due to its low power consumption and small form factor. In mobile system, the state of the power supplement is not stable, because it using the small sized battery that has limited capacity. So, a sudden power off failure can be occurred when we read or write the data on the flash memory. During the write operation, power off failure may introduce the incomplete write operation. Incomplete write operation denotes the inconsistency of the data in flash memory. To provide the stable storage facility with flash memory in mobile system, FTL should provide the fault tolerance against the power off failure. SSR (Simple Sector Remapper) is a fault tolerant FTL driver that provides block device interface and also provides tolerance against power off errors.

• The KIPS Transactions:PartD
• /
• v.19D no.2
• /
• pp.161-186
• /
• 2012

Recently, the flash memory consistently increases the storage capacity while the price of the memory is being cheap. This makes the mass storage SSD(Solid State Drive) popular. The flash memory, however, has a lot of defects. In order that these defects should be complimented, it is needed to use the FTL(Flash Translation Layer) as a special layer. To operate restrictions of the hardware efficiently, the FTL that is essential to work plays a role of transferring from the logical sector number of file systems to the physical sector number of the flash memory. Especially, the poor performance is attributed to Erase-Before-Write among the flash memory's restrictions, and even if there are lots of studies based on the log block, a few problems still exists in order for the mass storage flash memory to be operated. If the FAST based on Log Block-Based Flash often is generated in the wide locality causing the random writing, the merge operation will be occur as the sectors is not used in the data block. In other words, the block thrashing which is not effective occurs and then, the flash memory's performance get worse. If the log-block makes the overwriting caused, the log-block is executed like a cache and this technique contributes to developing the flash memory performance improvement. This study for the improvement of the random writing demonstrates that the log block is operated like not only the cache but also the entire flash memory so that the merge operation and the erase operation are diminished as there are a distinct mapping table called as the offset mapping table for the operation. The new FTL is to be defined as the XAST(extensively-Associative Sector Translation). The XAST manages the offset mapping table with efficiency based on the spatial locality and temporal locality.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.9-17
• /
• 2019

In this paper, we propose a block mapping technique applicable to NAND flash memory. In order to use the NAND flash memory with the operating system and the file system developed on the basis of the hard disk which is mainly used in the general PC field, it is necessary to use the system software known as the FTL (Flash Translation Layer). FTL overcomes the disadvantage of not being able to overwrite data by using the address mapping table and solves the additional features caused by the physical structure of NAND flash memory. In this paper, we propose a new mapping method based on the block mapping method for efficient use of the NAND flash memory. In the case of the proposed technique, the data modification operation is processed by using a blank page in the existing block without using an additional block for the data modification operation, thereby minimizing the block unit deletion operation in the merging operation. Also, the frequency of occurrence of the sequential write request and random write request Accordingly, by optimally adjusting the ratio of pages for recording data in a block and pages for recording data requested for modification, it is possible to optimize sequential writing and random writing by maximizing the utilization of pages in a block.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.699-702
• /
• 2009

저 전력, 내구성, 소형, 빠른 속도 등의 장점을 가지고 있는 플래시 메모리는 생산 기술 발전에 힘입어 센서 노드, 휴대폰, MP3, PMP등의 소형 전자 제품의 저장장치에서부터 SSD형태로 노트북이나 서버에 이르기 까지 그 활용범위가 더욱 확장되어 가고 있다. 다양한 시스템에서 사용될 수 있는 플래시 메모리의 특성상 이에 저장된 데이터의 호환성은 중요한 고려사항이다. 이를 위해 플래시 메모리의 고유한 특성을 숨기고 일반적인 블록장치로 에뮬레이션 해주는 소프트웨어인 FTL과 FAT 파일시스템이 플래시 메모리 관리를 위한 사실상 표준 소프트웨어로써 사용되고 있다. 그러나 범용 컴퓨터를 기반으로 개발된 FTL과 FAT 파일시스템을 열악한 하드웨어로 구성된 시스템에서 구동하는 경우 많은 제약이 발생한다. 따라서 본 논문에서는 이러한 제약사항을 극복하기 위해 최소한의 파일시스템 기능을 제공하는 FAT 표준 호환 FTL을 제안한다. 제안된 기법은 리눅스 운영체제에 동적으로 적재 가능한 모듈형태로 구현되었으며, 실험을 통해 본 논문에서 제안한 기법이 기존 기법 대비 32%의 메모리 공간을 절약할 수 있으며, 동시에 완벽한 FAT 호환성을 제공함을 확인할 수 있었다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2023

It is impossible to overwrite on an already allocated page in SSDs, so whenever a write operation occurs a page replacement with a clean page is required. To resolve this problem, SSDs have an internal flash translation layer called FTL that maps logical pages managed by a file system of operating system to currently allocated physical pages. SSD pages discarded due to write operations must be recycled through initialization, but since the number of initialization times is limited the FTL provides a caching function to reduce the number of writes in addition to the page mapping function, which is a core function. In this study, we focus on the FTL cache methodologies reducing the number of page writes and analyze the related algorithms, and propose a write-only cache strategy. As a result of experimenting with the write-only cache using a simulator, it showed an improvement of up to 29%.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.113-119
• /
• 2010

Software for GafChromic EBT2 film dosimetry was developed in this study. The software provides film calibration functions based on color channels, which are categorized depending on the colors red, green, blue, and gray. Evaluations of the correction effects for light scattering of a flat-bed scanner and thickness differences of the active layer are available. Dosimetric results from EBT2 films can be compared with those from the treatment planning system ECLIPSE or the two-dimensional ionization chamber array MatriXX. Dose verification using EBT2 films is implemented by carrying out the following procedures: file import, noise filtering, background correction and active layer correction, dose calculation, and evaluation. The relative and absolute background corrections are selectively applied. The calibration results and fitting equation for the sensitometric curve are exported to files. After two different types of dose matrixes are aligned through the interpolation of spatial pixel spacing, interactive translation, and rotation, profiles and isodose curves are compared. In addition, the gamma index and gamma histogram are analyzed according to the determined criteria of distance-to-agreement and dose difference. The performance evaluations were achieved by dose verification in the $60^{\circ}$-enhanced dynamic wedged field and intensity-modulated (IM) beams for prostate cancer. All pass ratios for the two types of tests showed more than 99% in the evaluation, and a gamma histogram with 3 mm and 3% criteria was used. The software was developed for use in routine periodic quality assurance and complex IM beam verification. It can also be used as a dedicated radiochromic film software tool for analyzing dose distribution.