• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.603-612
• /
• 2020

This study has a purpose to look into the effect of the relationship between the Tube current (mA) and SOD(Source to Object Distance), which is a parameter of lower limb angiography examination, and the dilution rate of the contrast medium concentration (300, 320, 350) on the image. To that end, using 3 mm vessel model water phantom, a vessel model custom made in the size of peripheral vessel diameter, this study measured relationships between change of parameters, such as tube current (mA), SOD and varying concentrations (300, 320, 350) of contrast medium dilution into SNR and CNR values while analyzing the coefficients of variance(cv<10). The software used to measure SNR and CNR values was Image J 1.50i from NIH (National Institutes of Health, USA). MPV (mean pixel value) and SD (standard deviation) were used after verifying numerically the image signal for region of interest (ROI) and background on phantom from the DICOM (digital imaging and communications in medicine) 3.0 file transmitted to PACS. As to contrast medium dilution by the change of tube current, when 146 mA and 102 mA were compared, For both SNR and CNR, the coefficient of variation value was less than 10 until the section of CM: N/S dilution (100% ~ 30% : 70%) but CM: N/S dilution rate (20%: 80% ~ 10% : 90%) the coefficient of variation was 10 or more. As to contrast medium dilution by concentration for SOD change, when SOD's (32.5 cm and 22.5 cm) were compared,For both SNR and CNR, the coefficient of variation value was less than 10 until the section of CM: N/S dilution (100% ~ 30% : 70%) but CM: N/S dilution rate (20%: 80% ~ 10% : 90%) the coefficient of variation was 10 or more. As to contrast medium dilution by concentration for SOD change, when SOD's (32.5 cm and 12.5 cm) were compared,For both SNR and CNR, the coefficient of variation value was less than 10 until the section of CM: N/S dilution (100% ~ 30% : 70%) but CM: N/S dilution rate (20%: 80% ~ 10% : 90%) the coefficient of variation was 10 or more. As a result, set a low tube current value in other tests or procedures including peripheral angiography of the lower extremities in the intervention, and make the table as close as possible to the image receiver, and adjust the contrast agent concentration (300) to CM: N/S dilution (30%: 70%). ) Is suggested as the most efficient way to obtain images with an appropriate concentration while simultaneously reducing the burden on the kidney and the burden on exposure.

• Korean Journal of Social Welfare
• /
• v.57 no.2
• /
• pp.5-40
• /
• 2005

Social welfare centers and residential care facilities where provide the socially disadvantaged with proper social services, face financial difficulties. This is because not only of the lack of governmental support, but also of social welfare centers and residential care facilities' lack of skills in developing abundant resources from the private sector. In this context, this study tried to find factors affecting resource mobilization of the social welfare facilities to devise policies in resource development. Mail survey was conducted with the structured questionnaire. Employees in charge of community resource development were asked to answer the questionnaire. The study population were welfare centers and residential care facilities. A total of 293 community welfare centers and 632 residential care facilities responded to the survey. The response rate was about 62%. The dependent variables of the study were the amount of resource mobilization in the year 2001 which was measured as the number of donors, the total amount of donation, and estimated amount of gift-in-kind. Three types models were constructed per each welfare institution. Independent variables were selected based on the previous research findings: community environment factor, structural factor, and resource development factor. Multiple regression was utilized to analyze the data. The resource development factor turned out to be significant variable in various models. In the models of donors, the amount of donation, and the amount of gift-in-kind (except for the welfare center model), at least one out of six variables of the resource development factors was significant welfare center. Welfare centers which establish the resource development department or hire employees to take care of resource development, utilize computer softwares to file donors, and utilize donor management programs, have more donors and/or donations than their counterparts. In addition, residential care facilities located in urban area have more donors and donations, and among residential facilities those for the disables, those with longer history and more employees, receive more donations than their counterparts. As for the gift-in-kind model, the welfare centers located in high income area and residential care facilities for the elderly, children and mentally retarded receive less gift-in-kind than their counterparts Based on the above findings, this study suggested that to mobilize resources the welfare centers as well residential care facilities need to have community resource development department or resource development staffs, adopt computer software to systematically organize donors, and utilize donor mobilizing and maintaining programs.

• Progress in Medical Physics
• /
• v.24 no.1
• /
• pp.48-53
• /
• 2013

Monte Carlo method has been known as the most accurate method for calculating absorbed dose in the human body, and an anthropomorphic phantom has been mainly used as a method of simulating internal organs for using such a calculation method. However, various efforts are made to extract data on several internal organs in the human body directly from CT DICOM files in recent Monte Carlo calculation using Geant4 code and to use by converting them into the geometry necessary for simulation. Such a function makes it possible to calculate the internal absorbed dose accurately while duplicating the actual human anatomical structure. Thus, this study calculated the absorbed dose in the human body by using Geant4 associating with DICOM files, and aimed to confirm the usefulness by compare the result with the measured dose using a Gafchromic EBT2 film. This study compared the dose calculated using simulation and the measured dose in beam central axis using the EBT2 film. The results showed that the range of difference was an average of 3.75% except for a build-up region, in which the dose rapidly changed from skin surface to the depth of maximum dose. In addition, this study made it easy to confirm the target absorbed dose by internal organ and organ through the output of the calculated value of dose by CT slice and the dose value of each voxel in each slice. Thus, the method that outputs dose value by slice and voxel through the use of CT DICOM, which is actual image data of human body, instead of the anthropomorphic phantom enables accurate dose calculations of various regions. Therefore, it is considered that it will be useful for dose calculation of radiotherapy planning system in the future. Moreover, it is applicable for currently-used several energy ranges in current use, so it is considered that it will be effectively used in order to check the radiation absorbed dose in the human body.

• Korean Security Journal
• /
• no.18
• /
• pp.73-99
• /
• 2009

There are three assassination and treatening cases in this thesis introduced as analysis data. They are shooting accidents of the U.S.A's President Reagun (1981,3.30), and the President Park Jeong Hee of South Korea(1974.8.15), assassination of the Prime Minister Lavin of Israel (1995.11.4) In March 30, 1981, there was an accident where criminal, Hinckley, fired ball cartridges right before the President Reagan got into the car to move to White House after completing the announcement of Hilton Hotel of Washington. As a result, the chest of president was shot and public information secretary and safeguard were wounded. In August, 15, pm 10:23, where the 29th 8.15 independent anniversay event was being celebrated by the people at the National theater in Jangchungdong, Seoul, the criminal Moon Sekwang fired ball cartridges, he failed to assassinate the President Park Jeong Hee of Korea, but shot the First lady Yuk Young Soo. She was wounded right part of head and died. In November 4, Saturday, pm 22:00 the Prime Minster Lavin had finished the supporting event of Middle Asia's Peace project and was taking on the car when he was killed by the criminal Amir's shooting, The accidents left very important lesson from the aspect of security analysis and it has been frequently used as a material for the education and training of safeguard organization. In Korea, as well as Presidential Security Service, national security departments have selected it as an important model for the subjects such as 'Security Analysis, 'Security Practice' and 'Security Methodology'. In the performance of security duty, security skill is the most important matter. Moreover, it has a close relationship with politics, society and culture. The purpose of this study is to analyze and reevaluate the case, which has been treated as a usual model from the aspect of security analysis, beyond its introduction. Attempted assassination of President Reagan was evaluated as a positive success example because of its rapid response of adjacent guards to evacuate Reagan, who is a guard target, within 10 seconds after the shot. When comparing it to President Kennedy Assassination of 1963, it was evaluated that guards were significantly specialized. In the study, however, it was possible to found many problems such as carelessness of guard, who is in charge of external area of event place, idle attitude for frequently used event place, confusion of wireless communication, risk of wireless security disclose, insufficient provision of compulsory record file, insufficient profiling of dangerous person and unsecured hospital and first-aid room.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.331-336
• /
• 2006

Moving behavior of groups of Hanwoo was observed when solid side was applied along the straight single file chute. Dark blue liners (PVC coated fabric) were hung on the outer side along the steel bars of chute to block vision of cattle. Ten animals were grouped together in a batch to move through chute to the restrainter. Movement of animals through chutes were significantly faster when solid side with liners were applied than when they had open vision of flight zone. And the difference in movement time between of solid side and open side was even greater in a longer chute than in a shorter one. From the experiment with longer chute, we could not find any significant differences between presence or absence of solid sides in the time spent for the leaading cattle to enter the squeeze chute from crowd pen. But the average time spent for movement from squeeze gait to restrainter was 22.78±1.15 seconds with solid sides, which was much shorter than with open sides (40.56±4.46 seconds). Time required for batch of animals to move from crowd pen to restrainter and exit was much faster with solid sides than with open sides: 96.33±3.98 seconds vs. 121.89±5.54 seconds from leading animal to enter the squeeze chute until the last animal of the batch to exit restrainter and 104.56±3.89 vs. 131.22±6.42 seconds for the whole batch of animals to enter the squeeze chute and exit restrainter. Another experiment with shorter chute showed that animals balked to right angled edge of the crowed pen before entering squeeze chute. We could not find any differences in time requred for the leading animal to enter the crowd pen from holding pen. Total time spent from entrance of leading animal to crowd pen until the last animal to exit restrainter was shorter with solid sides than with open sides: 177.44±5.20 seconds vs. 193.44±7.46 seconds.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.80-88
• /
• 2003

Object The purpose of this study were to evaluate the microtensile bond strength of resin fiber reinforced post to radicular dentin using resin cement according to various dentin surface treatment and to observe the inter face between post and root dentin under SEM Material and Method A total 16 extracted human single rooted teeth were used. A lingual access was made using a #245 carbide bur in a high-speed handpiece with copious air water spray. The post space was mechanically enlarged using H-file(up to #60) and Gates Glidden bures(#3). This was followed by refining of the canal space using the calbrating drill set provided in ER Dentinpost(GEBR, BRASSELER GmbH&Co. KG). The 16 teeth were randomly distributed into 4 group of 4 teeth. Group 1 teeth had their post space prepared using 10% phosphoric acid as root canal surface treatment agent during 20s. The canal was then rinsed with saline and dried with paper point. Group 2 teeth had their post space prepared using 3% NaOCl as root canal surface treatment agent during 30min. The canal was then rinsed with saline and dried with paper point. Group 3 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. The canal was then rinsed with saline and dried with paper point. Group 4 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. After rinsing with saline, the canal was rinced 10m1 of 3% NaOCl for 30min. After drying with paper point, the post(ER Dentinpost, GEBR, BRASSELER GmbH&Co. KG) was placed in the treated canals using resin cement. Once the canal was filled with resin cement(Super bond C&B sunmedical co. Ltd.), a lentulo was inserted to the depth of the canal to ensure proper coating of the root canal wall. After 24 hours, acrylic resin blocks($10{\cdot}10{\cdot}50mm$) were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strengths for each stick was measured with Microtensile Tester. Failure pattern of the specimen at the interface between post and dentin were observed under SEM. Results 1. Tensile bond strengths(meen{\pm}SD$) ) were expressed with ascending order as follows group 4, $12.52{\pm}6.60$ ; group 1, $7.63{\pm}5.83$ ; group 2, $4.13{\pm}2.31$ ; group 3, $3.31{\pm}1.44$. 2. Tensile bond strengths of Group 4 treated with 17% EDTA +3%NaOCl were significant higher than those of group 1, 2 and 3 (p<0.05). 3. Tensile bond strengths of Group 1 treated with 10% phosphoric acid were significant higher than those of group 2 (p<0.05). Tensile bond strengths of Group 4 treated with 17% EDTA +3% NaOCl was significant higher than those of other groups.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.227-260
• /
• 2018

Recently, as the use of drones increases, the risk of drone accidents and third-party property damage is also increasing. In Korea, due to the recent increase in drone use, accidents have been frequently reported in the media. The number of reports from citizens, and military and police calls regarding illegal or inappropriate drone use has also been increasing. Drone operators may be responsible for paying damages to third parties due to drone accidents, and are liable for paying settlements due to illegal video recording. Therefore, it is necessary to study the idea of providing drone insurance, which can mitigate the liability and risk caused by drone accidents. In the US, comprehensive housing insurance covers damages caused by recreational drones around the property. In the UK, when a drone accident occurs, the drone owner or operator bears strict liability. Also, in the UK, drone insurance joining obligation depends on the weight of the drones and their intended use. In Germany, in the event of personal or material damage, drone owner bears strict liability as long as their drone is registered as an aircraft. Germany also requires by law that all drone owners carry liability insurance. In Korea, insurance is required only for "ultra-light aircraft use businesses, airplane rental companies and leisure sports businesses," where the aircraft is "paid for according to the demand of others." Therefore, it can be difficult to file claims for third party damages caused by unmanned aerial vehicles in personal use. Foreign insurance companies are selling drone insurance that covers a variety of damages that can occur during drone accidents. Some insurance companies in Korea also have developed and sell drone insurance. However, the premiums are very high. In addition, drone insurance that addresses specific problems related to drone accidents is also lacking. In order for drone insurance to be viable, it is first necessary to reduce the insurance premiums or rates. In order to trim the excess cost of drone insurance premiums, drone flight data should be accessible to the insurance company, possibly provided by the drone pilot project. Finally, in order to facilitate claims by third parties, it is necessary to study how to establish specific policy language that addresses drone weight, location, and flight frequency.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.52-62
• /
• 2017

Overseas landscape practices have already benefited from the awareness of BIM while landscape-related organizations are encouraging its use and the number of landscape projects using BIM is increasing. However, since BIM has not yet been introduced in the domestic field, this study investigated and analyzed overseas landscape projects and discussed the positive effects and implementation of BIM. For this purpose, landscape projects were selected to show three effects of BIM: improvement of design work efficiency, building of a platform for cooperation, and performance of topography design. These three projects were analyzed across four aspects of implementation methods: landscape information, 3D modeling, interoperability, and visualization uses of BIM. First, in terms of landscape information, a variety of building information was constructed in the form of 3D libraries or 2D CAD format from detailed landscape elements to infrastructure. Second, for 3D modeling, a landscape space including simple terrain and trees was modeled with Revit while elaborate and complex terrain was modeled with Maya, a professional 3D modeling tool. One integrated model was produced by periodically exchanging, reviewing, and finally combining each model from interdisciplinary fields. Third, interoperability of data from different fields was achieved through the unification of file formats, conversion of differing formats, or compliance with information standards. Lastly, visualized 3D models helped coordination among project partners, approval of design, and promotion through public media. Reviewing of the case studies shows that BIM functions as a process to improve work efficiency and interdisciplinary collaboration, rather than simply as a design tool. It has also verified that landscape architects could play an important role in integrated projects using BIM. Just as the introduction of BIM into the architecture, engineering and construction industries saw great benefits and opportunities, BIM should also be introduced to landscape architecture.

• Radiation Oncology Journal
• /
• v.26 no.4
• /
• pp.263-270
• /
• 2008

Purpose: This study aimed to quantitatively measure the movement of tumors in real-time and evaluate the treatment accuracy, during the treatment of a liver tumor patient, who underwent radiosurgery with a Synchrony Respiratory motion tracking system of a robot CyberKnife. Materials and Methods: The study subjects included 24 liver tumor patients who underwent CyberKnife treatment, which included 64 times of treatment with the Synchrony Respiratory motion tracking system ($Synchrony^{TM}$). The treatment involved inserting 4 to 6 acupuncture needles into the vicinity of the liver tumor in all the patients using ultrasonography as a guide. A treatment plan was set up using the CT images for treatment planning uses. The position of the acupuncture needle was identified for every treatment time by Digitally Reconstructed Radiography (DRR) prepared at the time of treatment planning and X-ray images photographed in real-time. Subsequent results were stored through a Motion Tracking System (MTS) using the Mtsmain.log treatment file. In this way, movement of the tumor was measured. Besides, the accuracy of radiosurgery using CyberKnife was evaluated by the correlation errors between the real-time positions of the acupuncture needles and the predicted coordinates. Results: The maximum and the average translational movement of the liver tumor were measured 23.5 mm and $13.9{\pm}5.5\;mm$, respectively from the superior to the inferior direction, 3.9 mm and $1.9{\pm}0.9mm$, respectively from left to right, and 8.3 mm and $4.9{\pm}1.9\;mm$, respectively from the anterior to the posterior direction. The maximum and the average rotational movement of the liver tumor were measured to be $3.3^{\circ}$ and $2.6{\pm}1.3^{\circ}$, respectively for X (Left-Right) axis rotation, $4.8^{\circ}$ and $2.3{\pm}1.0^{\circ}$, respectively for Y (Crania-Caudal) axis rotation, $3.9^{\circ}$ and $2.8{\pm}1.1^{\circ}$, respectively for Z (Anterior-Posterior) axis rotation. In addition, the average correlation error, which represents the treatment's accuracy was $1.1{\pm}0.7\;mm$. Conclusion: In this study real-time movement of a liver tumor during the radiosurgery could be verified quantitatively and the accuracy of the radiosurgery with the Synchrony Respiratory motion tracking system of robot could be evaluated. On this basis, the decision of treatment volume in radiosurgery or conventional radiotherapy and useful information on the movement of liver tumor are supposed to be provided.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.378-389
• /
• 2006

The purpose of this study was to compare the sealing ability of root canal obturation with or without the treatment of smear layer. Eighty extracted human teeth with one canal were selected Instrumentation was performed with crown-down technique. After instrumentation, root canals of the NaOCl group and NaOCl-6 group were irrigated with 3% NaOCl. EDTA group and EDTA-6 group were irrigated with 17% EDTA. Then all teeth were obturated using continuous wane obturation technique NaOCl group and EDTA group were immersed in methylene blue solution for 84hours. NaOCl-6 group and EDTA-6 group were immersed in methylene blue solution for 6months. The teeth were sectioned at 1.5 mn (Level 1), 3.0 mm (Level 2) and 4.5 mm (Level 3) from the root apex. The length of dye-penetrated inter-face and the circumferential length of canal at each level were measured using Sigma-Scan Pro 5.0. 1. The mean leakage ratio was decreased cervically. 2. NaOCl group showed higher mean leakage ratio than EDTA group at each level. But there was significant difference at level 1 only (p < 0.05). 3. NaOCl-6 group showed higher mean leakage ratio than EDTA-6 group at each level. But there was significant difference at level 1 only (p < 0.05). 4. NaOCl-6 group showed higher mean leakage ratio than NaOCl group at each level. But there was significant difference at level 1 only (p < 0.05). 5. EDTA-6 group showed higher mean leakage ratio than EDTA group at each level. But there was no significant difference. 6. In NaOCl group and NaOCl-6 group, scanning electron micrographs of tooth sections generally covered with smear layer. In EDTA group and EDTA-6 group, tooth sections showing the penetration of sealers to opened dentinal tubules. The results suggest that removal of smear layer was effective to reduce the apical microleakage of the root canal.