• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 제7회 특별심포지움 논문집
• /
• pp.11-18
• /
• 2005

Filament inversion routines are highly effective for target definition whenever total-field DHTEM vectors can be obtained using three-component logging tools. However most cross-hole components contain significant noise related to sensor design and errors in observation of probe rotation. Standard stacking methods can be used to improve data quality but additional statistical methods based on cross-correlation and spatial averaging of orthogonal components may be required to ensure a consistent vector migration path. Apart from assisting with spatial averaging, multiple filaments generated for successive time-windows can provide additional imaging information relating to target geometry and current migration. New digital receiver systems provide additional time-windows to provide better tracking options necessary for high-resolution imaging of this type.

• Composites Research
• /
• 제15권1호
• /
• pp.9-20
• /
• 2002

본 연구에서는 유한요소해석을 이용하여 필라멘트 와인딩된 복합재 압력탱크의 설계방법을 정립하였다. 하중을 분담하는 금속재 라이너의 유무에 따라서 각각 설계를 수행하였다. 그리고, 반복적인 설계의 효율을 높이기 위하여 상용프로그램 ABAQUS와 연계된 유한요소해석 전처리 전용 그래픽 유저 인터페이스 프로그램을 구성하여 사용하였다. 또한, 금속재 탱크를 복합재 탱크로 대체하기 위한 초기 설계 과정을 정립하고 대체율을 정의하였으며, 주어진 요구조건에 따라 설계를 수행해 봄으로써 적합한 대체율 및 설계 모델을 제안하였다.

• Composites Research
• /
• 제16권1호
• /
• pp.34-41
• /
• 2003

두꺼운 필라멘트 와인딩 복합재료의 경화 공정의 최적화를 위만 모델이 제안되었다. 스마트 경화는 중심 축 부분과 바깥 쪽의 온도 조건을 같게 하는 방법과 중심 푹 쪽의 온도가 약간 높게 조절하여 경화 반응이 안쪽부터 시작될 수 있도록 하는 방법의 두 가지로 제안되었으며, 이는 잔류응력을 줄이기 위함이다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.186-191
• /
• 1999

The coagulation process of PAN (poly(acrylonitrile)) wet-spinning was modeled and simulated based on the numerical analysis of the coagulation of a viscous polymer solution by diffusional interchange with a bath. Experiments were performed with gelled solutions of PAN in nitric acid to determine the diffusion rate of solvent and nonsolvent (water) during the coagulation. The experimental data were analyzed by using equations of diffusion coefficient which are the function of the solvent concentrations of the coagulation bath and the filament. The concentration profile of solvent in moving filament was predicted by solving the diffusion model equation numerically. A simplex method was used in the computation of the parameters of the diffusion equations to minimize the difference between the numerical results and experimental data.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.472-476
• /
• 2011

본 논문은 필라멘트 와인딩 압력용기의 섬유 강도 크기 효과에 관한 이론 해석 및 시험 결과를 제시하였다. 시험 방법은 카본-에폭시로 필라멘트 와인딩된 여러 크기의 후프 링 시험이 수행되었다. 시험 결과로부터 섬유 강도의 크기 효과가 현저하게 나타남을 알 수 있었다. 해석적 방법은 와이블 최약 파손 모델과 다 단계 연속 파손 모델을 이용하여 후프 링 시험 결과와 비교하였다. 해석 결과는 시험 결과와 비교하여 현저하게 낮은 섬유 강도 값들을 나타내었다. 그러므로 길이 방향의 크기 효과를 개선한 개선형 다단계 연속 파손 이론을 제시하였다. 개선형 다단계 연속 파손 이론으로부터 구한 섬유 강도 값들은 시험 결과들과 좋은 일치를 보였다.

• 한국농공학회지
• /
• 제38권4호
• /
• pp.125-136
• /
• 1996

In order to investigate the characteristics of gravity drainage for geotextile, small-scale model tests for the geotextile chimney drain of earth dam which is a typical type of gravity drainage were carried out using 15 kinds of nonwoven and composite geotextiles. According to the results of this study, the drainage discharge of geotexgile drain generally increases with exponential function as hydraulic head increases and the increasing rate is greater in the coarser soil of dam material. It has a trend to increase when the construction slope of geotextile drain is steeper and the number of layers of geotextile is more. The relationship between the transmissivity of geotextile and the drainage discharge has positive correlation and the rate of increase is greater in the coarser soil. The geotextile products must be carefully selected in consideration of transmissivity of geotextile when the soil to be drained is coarser and the seepage flow is relatively high. Most of staple fiber nonwoven geotextile used in this study are found to be appropriate for drainage purpose. Among them, the composite geotextile the type of which geotextile is evaluated to be the most excellent material. But the geotextile of low permeability such as filament thermal bonded and filament spunbonded nowovens closely examined their transmissivity especially to be used for drainage function.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.131-138
• /
• 1998

In order to minimize the trial frequency in the new filter cigarette design, we studied the relationship between smoke yield and tipping materials of cigarette. A three levels full factorial design involving filament denier (X1,2.5-3.3d), Porosity of the acetate filter plug wrap (X2, 3,500-16,000CU) and porosity of the tip paper (X3, 400-1,200CU) was used. Three independent factors (Xl, X2, X3) were chosen for their effects on the various responses and the function was expressed in terms of a quadratic polynomial equation, Y : $\beta$o + $\beta$1Xl + $\beta$2X2 + $\beta$3X3 + $\beta$11Xl2 + $\beta$22X22+ $\beta$33X32 + $\beta$12X1X2 + $\beta$13XIX3 $\beta$23X2X3 which measures the linear, quadratic, and interaction effects. Twenty-nine trial numbers were obtained as a results of using a three levels full factorial design and it was analyzed by the multiple regression analysis with backward stepwise in STATISTICA/pc under restricted conditions. Tar yields of the cigarette was affected by porosity of tip paper (0.66), filament denier (0.47) and porosity of plug wrap (0.28) in the decreasing order, and linear effect of tip paper porosity (B3) and filament denier (91) were significant at a level of 0.01($\alpha$). The filament denier and tipping paper porosity interaction F ratio among three factors had a P-value of 0,000041, indicating higher interaction between these factors. Based on the analysis of variance, the model fitted for Tar (Y1) was significant at 5% confidence level and the coefficient of determination (0.96) was the proportion of variability in the data fitted for by the model.

• 대한토목학회논문집
• /
• 제28권6A호
• /
• pp.861-872
• /
• 2008

콘크리트충전 유리섬유 복합소재 튜브는 좋은 내구성과 심한 부식환경에서 견딜 수 있는 높은 화학적인 저항성으로 인해서 해양구조물에서 종종 사용된다. 이 연구는 원형 콘크리트충전 유리섬유 복합소재 튜브에 대한 다양한 실험을 수행하고 결과를 분석한다. 유리섬유 직포 수적층, 필라멘트 와인딩 적층을 압축을 받는 관의 바깥 튜브로 사용하는 경우에 고려해야 하는 몇 가지 측면을 실험 분석한다. 이 연구의 목적은 다음과 같다: (1) 유리섬유 층의 필라멘트 와인딩 각도의 효율성 검증 (2) GFRP 적층수가 강도 및 최고 변형률에 미치는 영향 평가 (3) 단부 재하조건이 구속효과 및 파괴양상에 미치는 영향 파악, 그리고 (4) 구속 상태에서 콘크리트의 응력-변형률 거동을 모사하는 해석적인 모델 제시이다. 세 가지 서로 다른 종류의 섬유 구성이 사용되었다: 직포층, ${\pm}45^{\circ}$ 필라멘트 와인딩 층, 그리고 ${\pm}85^{\circ}$ 필라멘트 와인딩 층. 각 층은 독립적으로 혹은 복합적으로 함께 사용되었다. 시편의 비 및 지름이 서로 다른 경우도 실험하였다. 총 27개의 GFRP 튜브 시편을 이용해서 인장 실험을 수행하였고, 66개의 콘크리트충전 GFRP튜브 시편을 이용해서 압축 실험을 수행하고 결과를 분석하였다. 구속상태의 콘크리트 응력-변형률 거동을 모사하는 해석적인 모델 및 영향계수를 제시하였다.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.141-152
• /
• 2015

Most of agricultural structures are consisted of complex components and exposed to various boundary conditions. There have been no ways to express those structures exactly for model experiment. As an alternative, 3D printer can produce any type of solid model. However, there are limited informations related to structural experiments using 3D printer. The object of this study gives the basic informations to structural engineers who try to use 3D printer for model experiment. When PLA was used as a supplier for 3D printer, the outcomes showed less heat deformation to compare with ABS. To test the material properties, two kinds of experiments (three-point flexibility test and compression test) were executed using universal testing machine. In three-point flexibility test, plastic hinge and its deformation were developed as observed in material such as steel. The behavior was in a linear elastic state, and elastic bending modulus and yield force were evaluated. In the compression test using unbraced columns with hinge-hinge boundary condition, the constant yield forces were observed regardless of different lengths in all columns with same section size, whereas the compressive elastic modulus was increased as the length of column was increased. The suggested results can be used for model experiments of various agricultural structures consisted of single material.

• 대한한의학회지
• /
• 제28권3호통권71호
• /
• pp.261-272
• /
• 2007

Objectives : This study was conducted to determine the analgesic effect of Acanthopanax sessiliflorus using the model of neuropathic pain and formalin-induced pain. Methods : A model of neuropathic pain was made by injuring the tibial nerve and sural nerve while the common peroneal nerve was maintained. After 2 weeks, the Acanthopanax sessiliflorus was orally administered to rats. The author performed behavioral teststo try out mechanical allodynia using von frey filament and cold allodynia using acetone, which are calculated by counting withdrawal response on foot. Thirty minutes after the Acanthopanax sessiliflorus injection in the abdominal cavity, the formalin test was performed. 2% formalin in a volume of $20{\mu}l$was injected subcutaneously into the plantar surface of the hindpaw with 26-G needle. To access formalin-induced pain behavior, paw licking time was measured every 5 min. Results : The Acanthopanax sessiliflorus 400mg/10ml/kg group showed significant decrease the withdrawal response of mechanical allodynia using von frey filament in the 10min, 30min, 60min and 120min increments compared with the control group. There were no significant differences in each group in the withdrawal response of cold allodynia using acetone. The Acanthopanax sessiliflorus group showed significant decrease in the formalin-induced pain behavior in the 15min, 20min and 25min increments compared with the control group. Conclusions : The Acanthopanax sessiliflorus may have a significant analgesic effect on the general pain as well as nerve injury pain.