• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1076-1080
• /
• 2003

$CO_2$ uptake of vegetation is one of the important variables in order to estimate photosynthetic activity, plant growth and carbon budget estimations. The objective of this research was to develop a new estimation method of $CO_2$ uptake of vegetation based on airborne hyperspectral remote sensing measurements in combination with a photosynthetic rate curve model. In this study, a compact airborne spectrographic imager (CASI) was used to obtain image over a field that had been set up to study the $CO_2$ uptake of corn on August 7, 2002. Also, a field survey was conducted concurrently with the CASI overpass. As a field survey, chlorophyll a content, photosynthetic rate curve, Leaf area, dry biomass and light condition were measured. The developed estimation method for $CO_2$ uptake consists of three major parts: a linear mixture model, an enhanced big leaf model and a photosynthetic rate curve model. The Accuracy of this scheme indicates that $CO_2$ uptake of vegetation could be estimated by using airborne hyperspectral remote sensing data in combination with a physiological model.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.797-804
• /
• 2012

Magnesium has a long tradition of use as a lightweight material in the field of automotive industry. This paper presents the design optimization process of Mg armrest frame to minimize its weight by replacing the steel frame. formerly, the analysis of steel armrest frame was peformed to determine the design specifications for Mg armrest frame. The initial design of Mg armrest frame was carried out by topological optimization technique. After six types of design variables and four types of response variables were defined, DOE(Design of Experiment) and RSM (Response Surface Method) were applied in order to measure sensitivity of design variables and realize optimization through regression model. After design optimization, the weight of the optimized Mg armrest frame was reduced by about 3% compared to the initial design of the Mg frame and was decreased by 41.7% in comparison with that of the steel frame. Some prototypical armrest frames were also made by die casting process and tested. The results were satisfying for its design specifications.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권8호
• /
• pp.461-472
• /
• 2020

In recent decades, the research field of entrepreneurship phenomenon has significantly increased in both quantity and sophistication. In Vietnam, paradoxically, while creating a new business venture has become a tendency, the interest in studying entrepreneurs seems not to be thoroughly investigated. This research aims to evaluate the factors that affect the entrepreneurial intention of information technology (IT) students in Vietnam. The authors make use of mixed methods including both quantitative research method and qualitative research method. The qualitative research method is employed to identify meanings, confirmations, adjustments, and compliments for concept-measurement variables in the conceptual model. Quantitative research is conducted from a sample of 424 IT senior students across many universities in Vietnam. Questionnaires have been sent to students to evaluate the measurement scale and appropriateness of the research model. Results from multiple regression highlighted five independent variables affecting the dependent variable, the entrepreneurial intention, in a descending order as following: entrepreneurial educational environment, personal characteristics, perception of feasibility, entrepreneurial supports, and financial accessibility. In addition, this research has proved that the variable attitudes towards entrepreneurship partially mediated among the interrelationship of the aforementioned variables. From this research, the authors make some recommendations to enhance entrepreneurial intentions of IT students in Vietnam.

• 지식경영연구
• /
• 제21권1호
• /
• pp.27-40
• /
• 2020

Response surface methodology (RSM) empirically studies the relationship between a response variable and input variables in the product or process development phase. The ultimate goal of RSM is to find an optimal condition of the input variables that optimizes (maximizes or minimizes) the response variable. RSM can be seen as a knowledge management tool in terms of creating and utilizing data, information, and knowledge about a product production and service operations. In the field of product or process development, most real-world problems often involve a simultaneous consideration of multiple response variables. This is called a multiple response surface (MRS) problem. Various approaches have been proposed for MRS optimization, which can be classified into loss function approach, priority-based approach, desirability function approach, process capability approach, and probability-based approach. In particular, the loss function approach is divided into univariate and multivariate approaches at large. This paper focuses on the univariate approach. The univariate approach first obtains the mean square error (MSE) for individual response variables. Then, it aggregates the MSE's into a single objective function. It is common to employ the weighted sum or the Tchebycheff metric for aggregation. Finally, it finds an optimal condition of the input variables that minimizes the objective function. When aggregating, the relative weights on the MSE's should be taken into account. However, there are few studies on how to determine the weights systematically. In this study, we propose an interactive procedure to determine the weights through considering a decision maker's preference. The proposed method is illustrated by the 'colloidal gas aphrons' problem, which is a typical MRS problem. We also discuss the extension of the proposed method to the weighted MSE (WMSE).

• 한국유체기계학회 논문집
• /
• 제14권2호
• /
• pp.47-51
• /
• 2011

This paper describes the shape optimization of a blower impeller used for a refuse collection system. Two design variables, which are used to define the blade angles of an impeller, are introduced to increase the blower performance. A blower efficiency is selected as an object function, and the shape optimization of the blade angles is performed by a response surface method (RSM). Three-dimensional Navier-Stokes equations are introduced to analyze the internal flow of the blower and to find the value of object function for the training data. Relatively good agreement between experimental measurements and numerical simulation is obtained in the present study. Throughout the shape optimization, blower efficiency for the optimal blade angles is successfully increased up to 3.6% compared with that of reference at the design flow rate. Detailed flow field inside the turbo blower is also analyzed and discussed.

• 아동학회지
• /
• 제21권4호
• /
• pp.81-103
• /
• 2000

Two sub-standies were conducted to analyze attachment related variables in infants and characteristics of maternal behavior. The first study investigated the relationships among attachment related variables in infants. The sample consisted of 58 pairs of 11- to 13- months-old infants and their mothers. A significant relationship was found among attachment security, infant temperament and maternal sensitivity. There were differences between security scores of the easy and difficult infants. Securely attached infants were rated as easier temperamentally than insecurely attached infants. The second study analyze maternal behavior characteristics. Subjects were this 30 mothers whose children were between the ages of 2 months and 24 months. The results identified four types of maternal behaviors. This study suggests different method of assessing subjective attributes of individuals by introducing Q-methods to the field of child development.

• 전자공학회논문지A
• /
• 제32A권10호
• /
• pp.93-101
• /
• 1995

The evaluation of the logic capability and the library generation method of the multiplexor-based logic module is described. Optimizing logic module for silicon area and logic capability is essential to build a efficient FPGAs(Field-Programmable Gate Arrays). Because the multiplexor-based logic module can implement a large number of functions, it presents difficulties for library-based approaches. However, the logic functions of the logic module can be significantly reduced by lmiting the number of variables and sum-of-products and by removing same functions with different variable ordering using algorithm presented in this paper.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.109-114
• /
• 2000

The purpose of the present study is to develope the estimation scheme for sensible heat flux by semi-empirical approach using routine meteorological data such as solar radiation and air temperature. To compare observed sensible heat flux with estimated sensible heat flux, the sensible heat fluxes were measured by three dimensional sonic anemometer-thermometer. The field observation was performed during 1 year from December 1, 1995 to November 30, 1996 on a rice paddy field in Chunchon basin. The heat fluxes were measured at a heights of 5m and mean meteorological variables were obtained at two levels, 2.5m(or 1.5m) and 10m. Since condition of rice paddy field such as, wetness of the field, roughness length, vary widely, we devided annual data to 5 periods. Comparing with two sensible heat fluxes, the results showed that the correlation coefficients were more than 0.86. Thus, we can conclude that the estimation method of sensible heat fluxes using routine meteorological data is practical and reliable enough.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.548-551
• /
• 2004

Magnetostrictive actuators have seen increasing use in fine positioning system because it has many advantages such as friction free, resolution of ${\mu}{\textrm}{m}$ or nm scale, and powerful output force. Usually, the magnetic circuit of magnetostrictive actuator has components which are flux return path, coil, and magnetostrictive material. It is classified in two types according to existence of the permanent magnet. The magnetic circuit having optimal performances transfer magnetic field which is obtained by providing input current at coil without energy loss. This paper described mathematical model of magnetic circuit for getting design variables. The modeling equation is obtained from the relations between flux and reluctance of the magnetic equivalent circuit. Also, finite element analysis has been used to study the performance of magnetic circuit according to change of design variables such as existence and shape of the permanent magnet, flux return path etc. The modification of dimensions enables us to optimize magnetic circuit.

• 대한기계학회논문집
• /
• 제7권2호
• /
• pp.168-174
• /
• 1983

The study is concerned with an analysis on the hydrofilm extrusion through conical dies. The upper bound method is adopted for the analysis of metal deformation in connection with hydrodynamic lubrication theory for the lubricant in order to determine the extrusion pressure for some variables such as reduction of area, die cone angle. In the upper bound method, a kinematically admissible velocity field is found by assuming proper streamlines and applying the flow function concept to the region of plastic deformation. The effect of work hardening is incorporated approximately by calculating the strains at the exit of the die. The experiments are carried out with the commercially pure aluminium for some chosen variables at room temperature. It is shown that the theoretical predictions are in good agreement with the experimental observations.