• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3677-3691
• /
• 2023

Since containment building is the major shielding structure to ensure safety of nuclear power plant, the structural behavior and ultimate pressure capacity of containments must be studied in depth. This paper addresses ambiguous issue of determining free-field position for liner failure by suggesting an expanded free-field region and comparing internal pressure capacities obtained by test data, conservative assumption and suggested free-field region. For this purpose, a practical approach to determine the free-field position for the evaluation of liner tearing is carried out. The maximum principal strain histories versus internal pressure capacities among different free-field positions at various azimuths and elevations are compared with those at the equipment hatch as a conservative assumption. The comparison shows that there are considerable differences in the internal pressure capacity at liner failure within the expanded free-field region compared to the vicinity of the equipment hatch. Additionally, this study proposes an approximate correlation with conservative factors by considering the expanded free-field ranges and material characteristics to determine realistic failure criteria for liner. The applicability of the proposed correlation is demonstrated by comparing the internal pressure capacities of full-scale containment buildings following liner failure criteria according to RG 1.216 and an approximate correlation.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.21-26
• /
• 2011

Initial reliability prediction done by calculation would be more practical if support by evidence from customer usage profile and field failure data to improve the prediction. Thus, the consistency of the design and the product would be practically validated. In this paper, it will address rationale and method to decide on Acceleration Factor (AF) to be used in Accelerated Life Test (ALT) through usage profile and field failure. The case study of tractor transmission is used to demonstrate the method which data obtained from surveys done on farmers, field visits and field failure data from service center. By considering all the elements, it will determine more relevant AF which indicates the real use conditions of the component.

• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.250-259
• /
• 2018

Purpose: Previously, missile reliability prediction is based on theoretical failure prediction model. It has shown that the predicted reliability is inadequate to real field data. Although an MTTF based reliability prediction method using real field data has recently been studied to overcome this issue. In this paper, we present a more realistic method, considering MTBF concept, to predict missile reliability. Methods: In this paper we proposed a modified survival model. This model is considering MTBF as its core concept, and failed missiles in the model are to be repaired and redeployed. We compared the modified model (MTBF) and the previous model (MTTF) in terms of fitness against the real failure data. Results: The reliability prediction result of MTBF based model is closer to fields failure data set than that of MTTF based model. Conclusion: The proposed MTBF concept is more fitted to real failure data of missile than MTTF concept. The methodology of this study can be applied to analyze field failure data of other similar missiles.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.52-60
• /
• 2007

Estimating parameters of the lifetime distribution is investigated when field failure data are not completelyreported. To take into account the reality and the accuracy of the estimates in such a case, the failure reportingprobability is incorporated in estimating parameters, Firstly, method of maximum likelihood estimate (MLE) isused to estimate parameters of the lifetime distribution when failure reporting probability is known, Secondly,Expectation and Maximization (EM) algorithm is used to estimate the failure reporting probability and parame-ters of the lifetime distribution simultaneously when failure reporting probability is unknown. For both cases,procedures of estimation are illustrated for single Weibull distribution and mixed Weibull distribution. Simula-tion results show that MLE obtained by the proposed method is more accurate than the conventional MLE.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.238-246
• /
• 1996

When the important structures or components of agricultural machinery are designed, the full-filed methods of stress analysis can provide enough information in order to obtain lighter weight and prevent failure. The photoelasticity has been applicated to solve many practical engineering problems. The coating method provides full-field information, enabling the engineers to determine the complete distribution of surface strains and directly highlighting severely strained areas, especially for the welded frames of agricultural machinery. A combined method of model and prototype for strain analysis of excavator has been successfully applied to improve design. A measuring and recording system controlled by micro-computer and application software for dynamic event was studied. It can be widely used in structural failure analysis under cyclical loading . Typical application concerned stress field of crack tip and failure analysis of some mechanical structures are introduced are in roduced briefly in this paper.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.65-76
• /
• 2001

Field data have been recorded as the time to failure or the number of failure of systems. We consider the time to failure and covariate variables in some pre-specified follow-up or warranty period. This paper aims to investigate study on the reliability estimation when some additional field data can be collected within-warranty period or after-warranty period. A various likelihood-based methods are outlined and examined for exponential or Weibull distribution.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.737-747
• /
• 2011

5678SMRT has installed various sensor for operating conditions(field of electric, facilities, signal, communication equipment and track) and environment of Every Function Room for remotely detecting and monitoring. Installed sound sensor for analyzed after remotely heard the noise of every equipment at Every Function Room and temperature sensor for check the temperature condition of Every Function Room. Additional installed voltage sensor in signal equipment room for monitoring RF track-circuit's voltage condition. Installed displacement sensor at The Chungdam bridge's railway for measuring and monitoring track displacement caused by temperature change and Pan/Tilt camera at sub-station and drainage for remotely field monitoring. Installed sensor for each equipment's operating condition and failure at Every Function Room then periodic check of workforce turned to around-the-clock surveillance by sensor therefore improvement of operating equipment. SMRT is lots of prevent a failure by Immediately detect of precondition of equipment failure by analyzed the sensor data. If the occurrence of an failure, become detected Immediately so possibility correct diagnosis and order by remotely field check by installed camera and sound sensor at field.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.97-98
• /
• 2022

The purpose of this study is to find out the failure conditions of fire doors in the process of use and prepare maintenance measures against them and find out the failure conditions and failure rates of fire doors according to the period of use of buildings. According to a survey of the failure rate and failure factor of fire doors, the failure rate of fire doors under 5 years was 3.7%, 13.4% of fire doors under 5 years and 10 years, and 14.8% of fire doors under 15 years and 27.6% of fire doors over 20 years. In particular, 15 years later, the failure rate of fire doors exceeded 20%. The main defects were found to be natural aging, holes, opening and closing failures, gaps, and failure and wear of accessories such as gaskets and door closers.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.678-685
• /
• 2005

Estimating parameters of the lifetime distribution is investigated when field failure data are not completely reported. To take into account the reality and the accuracy of the estimates in such a case, the failure reporting probability is incorporated in estimating parameters. Firstly, method of maximum likelihood estimate(MLE) is used to estimate parameters of the lifetime distribution when failure reporting probability is known. Secondly, Expectation and Maximization(EM) algorithm is used to estimate the failure reporting probability and parameters of the lifetime distribution simultaneously when failure reporting probability is unknown. For both case, procedures of estimation are illustrated for single Weibull distribution and mixed Weibull distribution. Simulation results show that MLE obtained by the proposed method is more accurate than the conventional MLE.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.2
• /
• pp.28-35
• /
• 2019

Since guided missiles with the characteristics of the one-shot system remain stored throughout their entire life cycle, it is important to maintain their storage reliability until the launch. As part of maintaining storage reliability, period of preventive test is set up to perform preventive periodic test, in this case failure detection rate has a great effect on setting up period of preventive test to maintain storage reliability. The proposed method utilizes failure rate predicted by the software on the basis of MIL-HDBK-217F and failure mode analyzed through FMEA (Failure Mode and Effect Analysis) using data generated from the actual field. The failure detection rate of using the proposed method is applied to set periodic test of the actual guided missile. The proposed method in this paper has advantages in accuracy and objectivity because it utilizes a large amount of data generated in the actual field.