• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.3
• /
• pp.163-172
• /
• 1989

In order to study spatial variability of soil physical properties accross the land-partitioned boundary on Hwadong silt clay loam soil (Fine clayey, mixed, mesic family of Aquic Hapludalfs), all measured data were analyzed by means of kriging, fractile diagram, smooth frequency distribution, and autocorrelation. Sampling for soil particle size distribution analysis was made at 225 intersections of $15{\times}15$ grid with 10m interval. Field capacity, bulk density and saturated hydraulic conductivity were measured in situ at 594 intersections of $33{\times}18$ grid with 2.5m interval in only $6,000m^2$ reselected from $22,500m^2$ of sampling area for particle size distribution analysis. Sampled or measured soil depths were 0 to 10cm 25 to 35cm and 50 to 60cm at each intersections. The results are summarized as follows: 1. The coefficient of variance (CV) of various physical properties ranges from 4.8 to 128.8%. Saturated hydraulic conductivity is classified into the high variation group with CV greater than 100%, while the low variation group with CV smaller than 10% consists of bulk density. Other properties belong to the medium variation group with CV between 10 and 100%. 2. The appropriate number of soil samples for the determination of various physical properties with error smaller than 10% are calculated as one for bulk density, six for field moisture capacity, 16 for silt, 19 for clay, 69 for sand and 686 for saturated hydraulic conductivity. 3. Smooth frequency distribution and fractile diagram show that saturated hydraulic conductivity is in lognormal distribution while other physical properties are in normal distribution. 4. Serial correlation analysis reveals that the soil physical properties have spatial dependence between two nearest neighbouring grid points. Autocorrelation analysis of physical properties measured between the serial grid points in the direction of south to north following section boundary shows that the zone of influence showing stationarity ranges from 7.5 to 40m. In the direction of east to west across section boundary, the autocorrelogram of many physical properties shows peaks with the periodic interval of 30m, which are similar to the partitioned land width. This reveals that the land-partitioned boundary causes soil variability.

• Korean Journal of Environmental Biology
• /
• v.36 no.1
• /
• pp.1-10
• /
• 2018

The objective of this study was to identify the effects of farming practices on the Misgurnus anguillicaudatus population, including their habitat characteristics, length frequency and the length-weight relationships of M. anguillicaudatus population; this study investigated the differences of the population living in environment-friendly (EFP) and conventional paddy fields (CP). As the result of age distribution by length frequency of M. anguillicaudatus, the EFP showed various age distributions which were not present in the CP. In particular, the age $0^+$ (28-51 mm) of individuals in the CP were significantly lower than those in the EFP. In May, the number of individuals was similar in CP and EFP, which led to the assumption that the M. anguillicaudatus population living in a shallow depth was killed by rotary and tillage works. The regression coefficient (b) in relation to the length-weight of M. anguillicaudatus population was 3.0, which appeared relatively stable as a habitat condition in the CP and EFP, except in June. The condition factor for M. anguillicaudatus population in the CP and the EFP showed a relatively stable monthly population, except in June which was likely to be influenced by the stress to lay their eggs or chemicals such as the use of pesticides. This change of habitat characteristics and length-weight relationship on M. anguillicaudatus population in rice paddy fields was influenced by farming practices as well as the time of year.

• The Korean Journal of Pesticide Science
• /
• v.19 no.2
• /
• pp.81-87
• /
• 2015

The present study was aimed to predict the pre-harvest residue limits (PHRLs) of pyrimethanil (fungicide) and methoxyfenozide (insecticide) in grape, and to estimate their biological half-lives and residual characteristics. The pesticides were sprayed once on grape in two different fields 10 days before harvest. At the end of 0, 1, 2, 3, 5, 7 and 10 days after application, samples were harvested for further analysis. The residual pesticides were extracted with acetonitrile and partitioned with dichloromethane, and the high-performance liquid chromatography with diode array detector (HPLC/DAD) was employed for the residue analysis. The results obtained in the present study show that the limit of detection of both pesticides were found to be $0.01mg\;kg^{-1}$. The recoveries of these pesticides were ranged between 80.6% and 102.5% with coefficient of variation lower than 10%. The biological half-lives of both pesticides were observed in field 1 and field 2 which shows 7.7 and 7.4 days for pyrimethanil and 5.1 and 6.1 days for methoxyfenozide, respectively. Further, the PHRL of pyrimethanil and methoxyfenozide was found to be $8.90mg\;kg^{-1}$ and $5.51mg\;kg^{-1}$, respectively at 10 days before harvest. Consequently, the present study suggests that the residual amounts of both pesticides will be lower than the maximum residue limits (MRLs) when grape is harvested.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.53-60
• /
• 2015

Purpose : The purpose of this study is to evaluate the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. Materials and Methods : The phantom is produced to equally describe prostate and rectum based on a 3D volume contour of an actual prostate cancer patient who is treated in Asan Medical Center by using a 3D printer (3D EDISON+, Lokit, Korea). CT(Computed tomography) images of phantom are aquired by computed tomography (Lightspeed CT, GE, USA). By using treatment planning system (Eclipse version 10.0, Varian, USA), treatment planning is established after volume of a prostate cancer patient is compared with volume of the phantom. MOSFET(Metal OXIDE Silicon Field Effect Transistor) is estimated to identify precision and is located in 4 measuring points (bladder, prostate, rectal anterior wall and rectal posterior wall) to analyzed treatment planning and measured value. Results : Prostate volume and rectum volume of prostate cancer patient represent 30.61 cc and 51.19 cc respectively. In case of a phantom, prostate volume and rectum volume represent 31.12 cc and 53.52 cc respectively. A variation of volume between a prostate cancer patient and a phantom is less than 3%. Precision of MOSFET represents less than 3%. It indicates linearity and correlation coefficient indicates from 0.99 ~ 1.00 depending on dose variation. Each accuracy of bladder, prostate, rectal anterior wall and rectal posterior wall represent 1.4%, 2.6%, 3.7% and 1.5% respectively. In- vivo dosimetry represents entirely less than 5% considering precision of MOSFET. Conclusion : By using a 3D printer, possibility of phantom production based on prostate is verified precision within 3%. effectiveness of In-vivo dosimetry is confirmed from a phantom which is produced by a 3D printer. In-vivo dosimetry is evaluated entirely less than 5% considering precision of MOSFET. Therefore, This study is confirmed the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. It is necessary to additional phantom production by a 3D printer and In-vivo dosimetry for other organs of patient.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.123-135
• /
• 2006

Spatial variability and distribution map of soil properties and the relationships between soil properties and crop yields are not well characterized in agroecosystems that have been land leveled to facilitate more cultivation of the new reclaimed sloping highland. Potato, onion, carrot, Chinese cabbage and radish were grown on the coarse sandy loam soil in 2004. Soil moisture content, soil penetration resistance and crop yield were sampled in the $10m{\times}50m$ field consisted of five plots. Sampling sites of each cultivation plot were 33 for the soil moisture, 11 for the soil penetration and 33 for the crop yield. The results of semivariance analysis, most of models were shown spherical equation. The significant ranges of each spatial variability model for the soil moisture, soil penetration and crop yield were broad as 33-35 meters in the potato cultivation plot, and that in the Chinese cabbage cultivation plot was narrow as 5-6 meters. The coefficient of variances (C.V.) of moisture, penetration and yield were various from 14 to 59 percents in five cultivation plots. The highest C.V. of potato yield was 59 percents, and that of the radish cultivation plot was as low as 14 percents. The required sample numbers for the determination of soil moisture content, soil penetration resistance and crop yield with error 10% at 0.05 significant level were ranged 8-40 for soil moisture, 7-25 for soil penetration and 424-4,678 for crop yield. The variogram and distribution map by kriging described field characteristics well so that the spatial variability would be useful for soil management for better efficiency and precision agriculture in the reclaimed highland.

• Journal of Korean Public Health Nursing
• /
• v.3 no.1
• /
• pp.74-100
• /
• 1989

Inspite of the lots of studies on the harmfulness of cigarette smoking to the body published by many researchers since 1950, cigarette smoking people are increasing in number especially, cigarette smoking by young and women causes a serious problem. Examining the physiological motives of youth shows that, impulse which the youth want to immitate the adults, alluring curiousity, and defiant physiology of escaping from the norm of traditional groups which has been banned are cooperated well compoundly. As the period of the youth is the one which they accumulate knowledge and charactor by learning as well as the period of growth mentally, and physically they should be rightly educated about smoking before they addicted to smoking and it is desirable for us to make the youth to understand how harmfully the smoking is to effect to their growth and mental soundness simply not as a social norm which they should not smoke. The main motive of this study on the attitude of smoking by the youth is to give basic materials related on this field. For this study, 647 questionnaires were used as studying material which were able to analyze among 720 questionnaires of 2 classes of each grade of 3 high schools among the high schools of boys, girls and co-educated in Seoul from Oct. 21, 1988 through Oct. 26, 1988. Study Instrument are graded in Likert's 5 point from 40 questions which are 20 questions m affirmations and 20 questions in negations after analyzing the factors on 60 simple sentence questions which the students showed in preliminary studies. And these are systemized to be measured from 1 point which means they think smoking IS very bad to 5points which means they think smoking is really good. In these collected materials, technical statistics of frequency. percentage, average, standard deviation are used for general character and smoking attitude, $X^2-test$ for examinning Independant variables of physical. emotional, ethical and other areas pearson's coefficient of correlation for related direction and degree" and step­regression analysis for the degree of relative contribution of all variables which effect smoking attitude. The results of this study are as follows; 1. The smoking attitude of high school boys and girls showed average of 1.78 in physical area, 2.63 in emotional area, 2.61 in ethical area, 2.29 in other area respectively in a negative attitude generally also the negative attitude are expressed most strongly in physical area. I've can also say by this results that smoking is harmful to their health and further more it can be judged that this proves the youth in the period of preparation be adults have a strong curiousity in the emotional, ethical and other areas. 2. The most influential variables in each field as related factors effecting smoking attitude of the student can be explained from 13.2 in physical area the lowest experienced variables to 25.2 in emotional area the highest of degree of smoking experience. The fact that the more the smoking experienced students are increasing in number the higher tendency which accept the' smoking tells as the importance of health education about the population of latest student's smoking as important variables shown equally in each area. Those of grade, age, numbers of smoking people in house are showed meaningful in pure interrelation. Those related to the acceptance of teacher's smoking, sex, mothors education are shown meaningful in opposite interrelations. This means that the' increasing number' of smoking people in grade age, the number of smoker in family have a affirmative attitude. And people who are not interested in teacher's smoking wants to quit it, and whose mother's education is higher have a negative attitude. 3. The most negatively answered questions of the smoking attitude In physical, emotional, ethical and other areas are as belows; Firstly too much smoking is harmful to our health is 1.12 point. Secondly smoking have a ill-effect on pregnancy and embryo is 1.13 point. Thirdly smoking is harmful· to our health is 1.27 point. Fourthly smoking in crowed area with the people such as In a bus or subway should be prohibited is 1.27point. Fifthly smoking can ruin lungs is 1.31 point. And the most affirmatively answered questions are also as below; Firstly we showed smoke depending on time and place is 3.96 points. Secondly smoking is just habit is 3.83 points. Thirdly smoking people seem to be unable and deplorable is 3.69 point. Fourthly smoking should be prohibited by law is 3.56 points. Fifthly high school student's smoking is immitation of adults is 3.52 points.

• Journal of Korean Public Health Nursing
• /
• v.4 no.1
• /
• pp.37-55
• /
• 1990

Every country in the world has been trying to expand the basic health right for the peoples as W.H.O has established the goal 'health for AU' by the year of 2000. Related to this goal, our government authority has establish the policy 'the insurance of health for all' into effect from July 198\). Recently hospitalshave been making a ceaseless effort for the plan for the rationalization of its management the academic World is making it a subject of discussion by doing the secure of manpower at a resonable level and the increase of productivity by the manpower. As a result of the efforts the study was established to secure the numbers of nursing manpower at a resonable level and use the unskilled persons at the utilizing field and seek the possible area of their activity for more efficient service through the investigation of ablity of simple nursing activities of regiestered nurses and nurse aides for rational function according to the educational levels and talents. The method of study was established by the registered nurses and nurse and nurse aides(R.N 229, N.A 226) who are working in 15 hospitals with over 200 beds. This surrey was conducted from Mar 29, 1989 to April 8, 1989. The method to test the degree of importance, difficulties, and the abillity of performance of a simple nursing activities was classified into 35 activities on the basis of references on this field. The degree of importance was composed from point l(Not so important) to 5(Very important). the degree of difficulties. was composed as follows; very easy - Point 1 very difficult and complicated - Point 5. and the ability of performance was composed from point 1 to 5. The materials gathered through the survey were analyzed with frequency, mean standard deviation, percentage. t-test, Anova, pearson's coefficient of correlation, stepwise multiple regression. factor analysis, discriminant analysis. The obtained results are summarized as follows: 1. The recognition values of the simple nursing activities of each group of registered nurse and nurse aides show; The degree of importance; 4.04 and 4.26 The degree of difficulties; 2.72 and 2.94 The ability of performance; 2.07 and 2.38 The brief summary shows there are little differences between who two groups the simple nursing activities turned out to be easy and simple work. 2. Regardless of the degree of importance, and difficulties, the ability of performance the important in fluencing of the degree of the simple nursing activities between the registered nurses and nurse aides was the order of educational level, hospital career, working career in wards and ages of the registered nurses and ages and hospital creer of nurse aides. The result was that the simple nursing activities could easily be familiar through the training of their working environment and period of experience. 3. Among the 35 simple nursing activities the items capable of resonable entrusting to the nurse aides are 5 that is helping bed-bathing, 8itz Bath, using bed pan, care while delivering patient, accompaying patient when visitor's check. There wasn't and differences between RN and nurse aides in performing the above 5 items. In anywhere. so we can say obviosuly that this nursing activities should be performed under the nursing system of which chief of nurse are supposed to supervise nurse aides as a possible function to be entrusted. In view of the above mentioned results, therefore, this partial functional job of the simple nursing activities can able be entrusted to the nurse aides through the regular training course. In case of these functional activities could be entrusted under, the responsibility of registered nurse, we can able suggest to for that there are the following advantages: 1.. In the nursing activities-affairs, the qualified guarantee of the nursing services can be kept and increased or promotoed with accommodation of the required nursing service and roles being expanded presently. 2. In the productivity of the hospital manpower, therefore, we have comt to view and consider in favourly that when an automational administration times would be come in the near future time to hospital affairs as a reality, to utilize the existing nures aides is better rather than investing so as to develop the other source manpowers or seek its for the efficient business management in the operational strategy or its policy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.93-102
• /
• 2012

Thanks to the rapid increase of the interest in the quality control of the General X-ray systems, this research proposes the direction of the quality control through comparing and inspecting the actual condition of the respective quality control in the Clinic, the educational institution and the hospital. The subjects of the investigation are diagnostic radiation equipment's in the clinic, the educational institution and the hospital around the capital. A test of kVp, mR/mAs out put test and reproducibility of the exposure dose, half value layer, an accordance between the light field and the beam alignment test, and lastly reproducibility of the exposure time. Then the mean difference of the percentage, the CV (Coefficient of Variation, CV) and the attenuated curve which are respectively resulted from the above tests are computed. After that we have evaluated the values according to the regulations on the Diagnostic Radiation Equipment Safety Administration regulations. In the case of the clinic and the educational institution, there were 22 general X-ray devices. And 18.2% of the kVp test, 13.6% of the reproducibility of exposure dose test, 9.1% of the mR/mAs out put test, and 13.6% of the HVL (Half Value Layer) test appeared to be improper. In the case of the hospital, however, there were 28 devices. And 7.1% of the reproducibility of exposure dose, 7.1% of the difference in the light field/ beam alignment, and 7.1% of the reproducibility of the exposure time appeared to be improper. According to the investigation, the hospital's quality control condition is better than the condition in the clinic and the educational institution. The quality control condition of the general X-ray devices in the clinic is unsatisfactory compared to the hospital. Thus, it is considered that realizing the importance of the quality control is necessary.

• Research in Plant Disease
• /
• v.14 no.1
• /
• pp.21-25
• /
• 2008

This study was conducted to decide disease incidence level of rice leaf blast required for reasonable fungicide application in paddy field. We induced the disease development by inoculating rice blast pathogens on rice seedlings (Jinmibyeo) in the greenhouse and transplanting the infected seedlings in the field two weeks after rice plants were transplanted. We scored the disease incidence, grouped and marked according to degree of percentage of diseased leaf area at maximum stage of disease development. The percent diseased leaf area (PDLA) had negative correlations with panicle number per hill, ripened grain (%), and total yield; their correlation coefficients (r), $-0.97^{**}$, $-1.00^{**}$ and $-0.96^{**}$, respectively. However, it had positive correlations with spikelets per panicle and thousand grain weight; their correlation coefficients (r), $0.98^{**}$ and $0.98^{**}$, respectively. Gain threshold (GT) calculated based on control cost and market price was estimated to be 8.35. Economic injury level (EIL) obtained based on GT and coefficient of damage of regression equation between disease incidence and the different yield components; panicle number per hill, spikelets per panical, ripened grain(%), thousand grain weight and yield were 41.8, 9.7, 19.1, 291.1 and 3.4%, respectively. Economic threshold (ET) for yield was 2.7% ($3.4%(EIL){\times}0.8$) on PDLA. These results suggest that application of fungicide is necessary when two under leaves are almost covered with lesions or contained more than twenty large lesions under leaves at maximum tillering stage.