• 제목/요약/키워드: fiber-to-the-home

검색결과 268건 처리시간 0.022초

대구경 광섬유 엔드캡 제작장비 개발 (Development of Fiber-end-cap Fabrication Equipment)

  • 이성헌;황순휘;김태균;양환석;윤영갑;김선주
    • 한국광학회지
    • /
    • 제32권2호
    • /
    • pp.49-54
    • /
    • 2021
  • 본 논문에서는 고출력 광섬유 레이저의 핵심 부품인 대구경 광섬유 엔드캡을 제작하는 장비를 설계 및 제작하였으며, 제작장비를 이용하여 대구경 광섬유 엔드캡을 제작하였다. 대구경 광섬유 엔드캡 제작장비는 레이저 광을 조사하여 접속 열원으로 사용하기 위한 CO2 레이저 광원부, 대구경 광섬유와 엔드캡의 위치를 이송하기 위한 정밀 스테이지 조립체, 스테이지 조립체와 연동되어 융착 시 정렬에 사용되는 비전 시스템으로 구성되어 있다. 레이저 광원의 출력은 스테이지 조립체와 연동되어 출력을 제어하며, 비전 시스템으로 대구경 편광유지 광섬유의 편광축을 정렬할 수 있도록 제작되었다. 자체 제작한 장비를 이용하여 클래드 직경이 400 ㎛인 대구경 편광유지 광섬유와 10(W)×5(D)×2(H) ㎣의 엔드캡을 레이저 융착하여 대구경 광섬유 엔드캡을 제작하였다. 제작된 대구경 광섬유 엔드캡의 신호광 삽입손실, 소광률 및 빔품질(M2)은 각각 0.6%, 16.7 dB, M2x=1.21, M2y=1.22로 측정되었다.

차세대 광 액세스 네트워크의 WDM 기술을 기반으로 하는 SCM-FTTH 네트워크의 구조 및 성능 분석 (Structure and Performance Analysis of SCM-FTTH Network Based on WDM Technology of Next-Generation Optical Access Networks)

  • 이상화
    • 한국콘텐츠학회논문지
    • /
    • 제6권10호
    • /
    • pp.153-162
    • /
    • 2006
  • WDM/SCM FTTH는 가까운 미래에 WDM과 SCM 기술을 사용하여 액세스 네트워크의 다양한 요구 사항들을 충족시킬 수 있는 광 액세스 네트워크이다. 본 논문에서는 WDM FTTH(Fiber To The Home) 및 WDM/SCM (Wavelength Division Multiplexing/Sub-Carrier Multiplexing) FTTH의 새로운 네트워크 구조를 제안하고 네트워크의 광 특성들과 가입자 요구에 의한 대역폭의 동적인 할당에 대한 성능을 시뮬레이션 결과를 통해서 분석한다.

  • PDF

FTTH 기반 통합 홈게이트웨이 배치 배선에 관한 연구 (A Study on FTTH-based Home Gateway Positioning and Cabling Method)

  • 정연쾌;이상재;전용일;이형호
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2003년도 하계학술대회
    • /
    • pp.343-345
    • /
    • 2003
  • 본 논문에서는 광가입자 액세스망에서 댁내 세대 단자함까지 광케이블이 포설된 FTTH(Fiber To The Home)환경에서 가정내에 광대역 홈서비스를 효과적으로 제공하기 위한 홈게이트웨이 시스템의 배치 및 댁내 배선에 대하여 기술하였다. 본 논문에서는 홈네트워크 구성요소 및 홈게이트웨이 배치 배선 결정 요소를 분석하고, 통신과 방송이 통합된 다양한 멀티미디어 서비스를 효과적으로 제공하기 위하여 주거 형태, 홈네트워크 기술 및 서비스에 따른 FTTH 기반 통합 홈게이트웨이 시스템의 배치 및 홈네트워킹을 위한 배선 방안을 제시하였다.

  • PDF

Image Analysis: A Novel Technique to Determine the Efficiency of Wiping Cloths

  • Lee Jae-Hyung;Kim Seong-Hun;Oh Kyung-Wha
    • Fibers and Polymers
    • /
    • 제7권1호
    • /
    • pp.73-78
    • /
    • 2006
  • The ability to absorb liquid and the dust removal performance are important factors for wiping cloths used to remove contaminants. We have developed a method that can determine the contaminant removal performance of wiping cloths. In the gravimetric method, experimental errors are unavoidable because the contaminant plate is much heavier than the contaminant material. However, we used image analysis to reduce the experimental errors, and did not use the heavy contaminant plate. The correlation coefficient between the image. analysis and the gravimetric methods was very high, at R=0.97, with a significance level of 95%. From the correlation analysis and empirical data, the image analysis method is a useful tool for measuring wiping efficiency. The wiping efficiency measured using image analysis has a close relationship to the wiping speed, viscosity of the contaminant, and wiping pressure, at the significance level of 95%.

알칼리 처리에 의한 폴리에스테르 직물의 물성 변화 (Effects of Alkali Treatment on Physical Properties of PET Fabrics)

  • 유혜자;최종명;이혜자
    • 한국의류학회지
    • /
    • 제20권4호
    • /
    • pp.609-619
    • /
    • 1996
  • Polyethylene Terephthalate (PET) has been used as a mainstream fiber to make silklike fiber. The silky characteristics such as softness, dry touch feeling and flexibility can be obtained by weight reduction treatment. In aqueous alkali solution, the surface of PET is dissolved away and reduced in weight. The PET fiber, yarn and fabric become thinner and the gaps between fibers are wider. Its mobility is greatly improved without change of basic structures of the treated PET fibrics. The alkali treatment was conducted under the various experimental conditions such as alkali (NaOH) concentration, treatment time and temperature. As the weight loss increased, drapability improved and tensile strength remarkably reduced. When the PET fabrics lost 30% in their weight, drape coefficient lowered as much as 30oA and tensile stregth lowered as much as 50%. The weight loss over 30% brings great improvement in drapability and dyeability and significant decline in durability. By the alkali treatment, absorbency in spectrophotometer of dyed PET can be increased as much as 82% due to the increase of the surface area and formation of microvoids on the surface.

  • PDF

경남지역 청소년의 식습관, 영양 및 식이섬유 섭취실태에 관한 연구 (A Study on the Eating Habits, Nutrition and Dietary Fiber Intakes of Teenagers in Gyeong-Nam Areas)

  • 손연;김행자
    • 한국가정과교육학회지
    • /
    • 제17권4호
    • /
    • pp.1-26
    • /
    • 2005
  • 본 연구는 우리나라 청소년들의 식습관, 영양 및 식이섬유 섭취현황을 성별, 도시와 농촌 지역별로 조사하여 식생활 현황과 문제점들을 파악하고, 이에 따라 청소년들에게 바람직한 식습관을 형성시키며 올바른 영양교육 및 개선방향 정립을 위한 기초 자료를 제공하고자 하는데 목적을 두었다. 조사대상 남$\cdot$여학생의 $80\%\~90\%$는 정상 또는 여윔상태였으며 지역간에는 식생활비에 차이가 보였다. 식생활운영에는 어머니의 연령, 학력, 가족수 등의 요인이 영향을 미치고 있었다. 식사패턴은 $60\%$이상이 불규칙하며 약 $40\%,\;50\%$의 청소년이 편식을 하고 있었다. 에너지섭취량과 3대 영양소 섭취율은 1일 한국인 영양권장량에 미달되었다. 식이섬유의 1일 평균 섭취량은 권장량에 크게 미달되는데 특히 농촌 청소년의 경우가 더 낮았다. 식이섬유 섭취량과 식물성 음식의 기호도는 상관관계가 있는 것으로 나타났다. 이에 따라 청소년들의 영양교육 지도는 지역별, 성별 요인을 고려하여 이루어져야 하며, 영양교육 시에는 청소년들이 매스컴의 영향으로 마른 체형을 선호하여 건강을 위협받고 있으므로 이들의 자아정체감 및 가치관 형성을 위한 교육도 병행되어야 할 것이다. 아울러 청소년에게 필요한 각종 영양소와 식이섬유 섭취를 위한 잡곡밥, 생선류, 채소류, 김치류 등을 주로 한 단체급식 구성에 중점을 두어야 할 것이며, 식습관, 각종 영양소 및 식이섬유 섭취에 대한 학교차원, 사회차원에서의 평생교육이 요망된다.

  • PDF

알칼리 감양가공이 Polyester 직물의 세척성에 미치는 영향 -표면구조의 효과를 중심으로- (A Study on the Detergency of Alkali-treated Polyester Fabric - The effects of surface structure-)

  • 신혜원;김성련
    • 한국의류학회지
    • /
    • 제10권2호
    • /
    • pp.1-9
    • /
    • 1986
  • To study the effects of surface structure of fiber on the decrement of fatty soil removal at high temperature, the following variables were selected: controled and alkali-treated P.E.T.(polyester) fabrics and chopped fibers as substrates to estimate the detergencies, different aging methods of soiled substrates, and different washing temperatures and surfactant solutions. Radiotagged tripalmitin was used as soil and the detergency was estimated by means of liquid scintillation counting method. The results were as following: The surface of the fiber became rough with many grooves and the hydrophilicity of the fiber was increased and the structure of the fabric became loose by alkali treatment. While the detergency of alkali-treated P.E.T. fabric was better than that of controled P. E. T. fabric, there was no significant differences between the detergencies of controled and alkali-treated chopped fibers. These results indicate that the increment of detergency of alkali-treated P.E.T. fabric is mainly resulted from the changes of fabric structure and the improved hydrophilicity of fiber by alkai treatment. The detergency of tripalmitin was increased with elevating temp. below the m.p. of tripalmitin, was decreased around the m.p., and again was increased above the m.p ..It is considered that the decrement of detergency around the m.p. is due to the diffusion of molten tripalmitin into the grooves on fiber surface, the inner part of fiber, and between fibers. When controled and alkali-treated soiled fabrics and soiled chopped fibers were washed in the distilled water and in the Na-DBS solution respectively, below $60^{\circ}C$ detergencies of alkali-treated fabrics and chopped fibers were improved. However above $60^{\circ}C$ this result was reversed. Therefore these results are regarded as the effects of grooves on fiber surface at high temp. and improved hydrophilicity at low temp. by alkali treatment. When controled and alkali-treated soiled fabrics and soiled chopped fibers were hot-aged before washing, the detergencies of both species were decreased generally. Because the soil was diffused into the grooves on fiber surface, the inner part of fiber, and between fibers during hot-aging. The detergencies of hot-aged species were also decreased above certain temp.. These results suggest that the decrement of detergency at high temp. be resulted not only from the diffusion of soil into the grooves on fiber surface, the inner part of fiber, and between fibers, but also from the characteristics of surfactant solutions.

  • PDF

FTTH-PON Splitter 최적 위치 선정 (Tabu Search for FTTH-PON Splitter Location-Allocation Problem)

  • 김혜원;이영호;김영진;한정희
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
    • /
    • pp.1641-1646
    • /
    • 2006
  • This paper deals with a physical access network design problem arising from the deployment of fiber-to-the-home passive optical networks (FTTH-PON). The problem seeks to find an optimal location and capacity assignment of splitters in the network such that the total cost of fiber and splitter is minimized, while satisfying all the demand. We propose tabu search approach for finding a good feasible solution.

  • PDF

소비자 의복관여와 소재평가기준에 관한 연구 (The Consumer's Clothing Involvement & Textile Evaluation Criteria)

  • 김성희
    • 대한가정학회지
    • /
    • 제34권5호
    • /
    • pp.197-208
    • /
    • 1996
  • The study mainly focused on textile evaluation criteria and clarified the relationship between the levels of clothing involvement and demographic variables. Subjects were 459 women living in JeonJu. SPSS package was used to analyzed the data. The main findings of this research were as follows: 1. Textile evaluation criteria such as the high quality of textile, the component of fiber, the easeness of care, and the durability of fabrics were used for the jackets and the coats. As regards the blouses and the shirts, the easeness of care, the high quality of fabric, the component of fiber, and the comfort of wearing, the easeness of care and the shape for better looks influenced the decision making process of consumers. 2. The subjectives were categorized into three groups depending upon the clothing involvement level. They have shown significant differences from demographic factors such as age, marrige, education, and occupation.

  • PDF

경제성을 고려한 초고강도 강섬유보강 콘크리트의 구성인자 분석 (The Analysis about Economical Composition in Ultra High Strength Fiber Reinforced Concrete)

  • 강수태;박정준;류금성;고경택;김성욱;이장화
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
    • /
    • pp.33-36
    • /
    • 2006
  • In manufacturing Ultra high strength fiber reinforced concrete(UHSFRC), steel fiber, super-plasticizer and silica fume are important but they are imported materials therefore very expensive. consequently it is necessary to find substitutes of them or to develop producing techniques in order to manufacture UHSFRC economically. In this study, we investigated if it was possible to substitute blast-furnace slag instead of silica fume and steel fiber of home manufacture instead of one of overseas manufacture.

  • PDF