• Applied Microscopy
• /
• 제35권1호
• /
• pp.31-39
• /
• 2005

Synapses are contact points where one neuron communicates with another. The morphological change of synapses under various physiological or pathological conditions has long been hypothesized to modify their functional properties. 3-dimensional (3-D) reconstruction of synapses with serial ultrathin sections has contributed to the understanding of ultrastructural dimensions and compositions of synapses. The 3-D reconstruction procedures, however, require a great amount of expertise as well as include prohibitively timeconsuming processes. Here, we introduce efficient 3-D reconstruction technique using high-voltage electron microscopy (HVEM). Primarily, we established an optimal section thickness and staining condition to observe synaptic structures in detail under HVEM. The result showed that synaptic profiles were preserved at the section thickness of 250 nm without the overlapping of synaptic ultrastructures. An increase in the reaction time of en bloc staining was most efficient to enhance contrast than the extension of postembedding staining or the addition of uranyl acetate during dehydration. Then, 3-D reconstruction of parallel fiber-Purkinje cell synapses in the rat cerebellum was carried out with serial HVEM images and reconstruction software. The images were aligned and the contours of synapses were outlined on each section. 3-D synapses were finally extracted from the section files by grouping all the synaptic contours. The reconstructed synapse model clearly demonstrated the configuration of pre and postsynaptic components. These results suggest that 3-D reconstruction of synapses using HVEM is much efficient and suitable for massive quantitative studies on synaptic connectivity than conventional TEM approach using numerous ultrathin sections.

• The Korean Journal of Pesticide Science
• /
• 제18권4호
• /
• pp.247-257
• /
• 2014

Assessment for operator's dermal and inhalation exposure to acetamiprid during cultivation of water melon in greenhouse was carried out. For dermal exposure measurement, whole body dosimetry (WBD) was performed as the first trial in Korea. WBD consists of cotton/polyester outer clothes and cotton inner clothes. Hand exposure was measured by washing of nitrile gloves and hands while head exposure was monitored by face/neck wipe technique. Inhalation exposure was monitored with personal air sampling pumps and IOM sampler (glass fiber filter). Analytical limit of quantitation was 2.5 ng/mL. Good reproducibility (C.V < 8.7%), linearity ($R^2$ > 0.99) and recovery (70~119%) were obtained. Field recovery of acetamiprid was 77~95%. During mixing/loading, hand exposure of acetamiprid was about 10 times ($229.7{\mu}g$) more than that of application case ($20.9{\mu}g$). During application, total dermal exposure was $1207.4{\mu}g$. Exposure of lower legs was $1132.1{\mu}g$, which is 93.8% of the total dermal exposure. Inhalation exposure during mixing/loading and application was not detected. Margin of safety (MOS) was calculated for risk assessment using male Korean average body weight (70 kg) and acceptable operator exposure level ($124{\mu}g/kg/day$) to give 140, suggesting that health risk of operator during treatment of acetamiprid for water melon in greenhouse could be safe.

• Journal of Bio-Environment Control
• /
• 제24권4호
• /
• pp.281-286
• /
• 2015

This study was carried out to investigate the effects of cultural systems on growth, vitamin C, amino acid content, and yield of Peucedanum japonicum grown in artificial light plant factory. Treatments were given with Nutrient Film Technique (NFT), Medium (Perlite), and Aeroponics. Plant height was the highest in NFT system as 10.2cm, and was the shortest in Perlite as 8.9cm. Fresh leaf weight was the high in order of Perlite, NFT, and Aeroponics. Total phenolic compounds was different from cultural systems in order of Aeroponics as $117.84mg{\cdot}100g^{-1}\;GE$, NFT as $98.57mg{\cdot}100g^{-1}\;GE$ and Perlite as $74.62mg{\cdot}100g^{-1}\;GE$. Total flavonoid content of Aeroponics is $0.12mg{\cdot}100g^{-1}$ but that of NFT and Perlite treatments is not detected. Vitamin C content in Aeroponics as $108.23mg{\cdot}100g^{-1}$ was significant different from Perlite as $88.05mg{\cdot}100g^{-1}$ as and NFT $80.83mg{\cdot}100g^{-1}$. Total dietary fiber content was higher Aeroponics than Perlite and NFT. Cystein content was the highest in Aeroponics as $46.76mg{\cdot}100g^{-1}$ and methione content was the lowest in Perlite as $75.64mg{\cdot}100g^{-1}$. Mineral content of leaves was high in order of K, Ca, P and Mg in all treatments.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제31권1호
• /
• pp.75-84
• /
• 2011

This study was conducted to investigate the effect of harvest stage of corn on the quality of square baled corn silage manufactured with corn grown in paddy land of Department of Animal Resources Development, National Institute of Animal Science, RDA from 2009 to 2010. Corn "Kwangpyungok" was harvested at three different growth stages (milk, yellow ripen and ripen stage) and ensiled at each harvest time. Square baled corn silage was manufactured by use of square silage wrapping compressor. Each treatment was replicated three times. The content of crude protein (CP) of corn in square baled corn silage decreased with delayed maturity, but the content of ADF (acid detergent fiber), NDF (neutral detergent fiber), TDN (total digestible nutrient) and in vitro dry matter digestibility (IVDMD) were not changed. The content of moisture, pH and the nutritive values at three different harvest stages were not influenced by the method of silage manufacture and inoculant. The content of lactate of square baled corn silage harvested in milk stage of corn was significantly increased, as compared with that of round baled corn silage (P<0.05), but in stage of yellow ripen was significantly decreased (P<0.05). The content of acetate in square baled corn silage significantly decreased with delayed harvest maturity, as compared with that of round baled corn silage (P<0.05). Flieg's score of square baled corn silage harvested in milk stage of corn was slightly higher than that of round baled corn silage, but Flieg's scores in yellow ripen stage and ripen stage were not influenced by the method of silage manufacture. Flieg's score with delayed maturity was not influenced by the method of silage manufacture and inoculant. The manufacture of square baled corn silage was proved to be suitable for the fermentation of corn silage. Therefore, this study suggest that square baled corn silage can be a way of new silage manufacture technique.

• Journal of Periodontal and Implant Science
• /
• 제23권3호
• /
• pp.577-594
• /
• 1993

The ultimate goal of periodontal therapy is the regeneration of the periodontium that have been destroyed as a result of periodontal disease. This study were done in order to determine the healing status of periodontium under Polytetrafluoroethylene and millipore fillter combined with fibrin and the effect of the guided tissue regeneration procedures were performed as follows : 1) flap operation using PTFE membrane(control group) 2) flap operation using PTFE membrane which was fixed with fibrin(experimental group 1) 3) flap operation using millipore filter which was fixed with suture(experimental group II) 4) flap operation using millipore filter which was fixed with fibrin(experimental group II) After 1, 2, 4, 8, 12 weeks, dogs were sacrificed by perfusion technique and tissue block was excised including the tooth and prepared for light microscope with H-E & Masson’s trichrome staining. The result were as follows : In control and experimental group, there is no siginificant difference on epithelial cell down growth within 1st week, but more epithelial cell downgrowth in millipore or millipore combined with fibrin group. In this experiment, there were no significant difference in new cementum and alveolar bone formation whether PTFE membrane was fixed with suture or fibrin. In control and each experimental group, bone maturation appeared in 4 weeks, bone width increased bucco-lingually in control and experimental 1 group especially. Both control group and experimental group showed mild mew cementum formation on root surface and irregular arrangement of collagen fiber at 4 weeks, that showed obvious increased cementum formation at 8 weeks, and that was observed the functional arrangement of collagen fiber between new cementum and new alveolar bone at 12 weeks.

• Journal of Bio-Environment Control
• /
• 제14권2호
• /
• pp.106-113
• /
• 2005

This study was carried out to develop a novel hydroponic medium far fruit vegetable crops by using waste synthetic fibers. In physical analysis of the synthetic fiber medium (SFM), the bulk density and percent solid phase were lower, while the porosity and water content were greater in comparison with the rockwool slab. The SFM had pH of 6.5 and EC of $0.03dS{\cdot}m^{-1}$ both of which are similar to those of the rockwool slab. The CEC of 0.39me/100mL of the SFM was lower than compared with 3.29me/100mL of the rockwool slab. However, concentrations K, Ca, Mg and Na were slightly higher in the SFM than those in the rockwool slab. The 'Momotaro' tomato crop in the SFM gave comparable plant height, stem diameter, days to first flowering, fruit weight and percent marketable yield as the rockwool slab. In the SFM and in the rockwool slab, mean fiuit weight were 182g and 181g, percent marketable yield were $93.8\%$ and $92.0\%$, respectively. The marketable yield per 10a in the SFM was 12,799 kg, which was $97\%$ of that in the rockwool slab. Growth parameters such as leaf length and width, leaf number, stem diameter and chlorophyll content of an exportable cucumber crop grown in the SFM and the rockwool slab were not different. Fruit weight was greater in the rockwool slab, while percent marketable yield was greater in the SFM. The marketable fruit yield per 10a of 5,062kg in the SFM was $2\%$ greater than that in the rockwool slab. $NO_3$ concentration in nutrient solution during the crop cultivation was higher in the SFM than in the rockwool slab, while concentrations $NH_4$, K, Ca, Mg and $SO_4$ were not different between the two media.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제31권3호
• /
• pp.305-314
• /
• 2011

This study was conducted to investigate the effect of harvest stage of corn on the quality of gunny bag silage manufactured with corn grown in paddy land of Department of Animal Resources Development, National Institute of Animal Science, RDA from 2009 to 2010. Corn "Kwangpyungok" was harvested at three different growth stages (milk, yellow ripen and ripen stage) and ensiled at each harvest stages. The content of crude protein (CP) of corn in gunny bag silage decreased with delayed harvest maturity, but the contents of ADF (acid detergent fiber), NDF (neutral detergent fiber), TDN (total digestible nutrient) and in vitro dry matter digestibility (IVDMD) were not changed with delayed harvest maturity. The contents of moisture, pH, and the nutritive values at three different harvest stages were not influenced by the method of silage manufacture and inoculant. The content of lactate in corn bag silage at milk stage was significantly increased (P<0.05), as compared with that of round baled corn silage. However, The contents of lactate in corn bag silage at yellow ripen stage and ripen stage were significantly decreased (P<0.05). Flieg's score in corn bag silage manufactured at milk stage increased as compared with that of round baled corn silage, and Flieg's score was hardly influenced by inoculant. Therefore, we suggest that manufacture method of bag silage can be new silage technique to improve the fermentation of corn silage and that smallscale stock farmer could be substituted bag silage for roll bale silage on small farm land.

• Korean Journal of Heritage: History & Science
• /
• 제51권4호
• /
• pp.108-119
• /
• 2018

"The Collection of Yi Chungmugong" manuscript is a hand-written manuscript of the volume 1 consisting of the Collection, published in 1795 and it seems to have completed the contents of the book by correcting the first part of the book before print. The book adopted a form of Seonjangbon(線裝本) of Ochimanjeongbeop(五針眼訂法) and was urgently needed some measures to preserve because it has been much damaged by stains, loss and oxidation due to moisture on the bottom of it. In addition, a scientific investigation was applied to find out the features of the quality of paper and fiber used for the book, which would be reflected in the process of the preservation. The characteristics of paper were measurmented for size(cm), thickness(mm), weight(g), basis weight($g/m^2$), density($g/cm^3$), chain line and laid lines($3{\times}3cm$). The measurement showed that the characteristics of paper used in royal books published in the late Joseon Dynasty. For the paper-fiber of the book, C stain was used and the technique revealed that the book is made of bast fibre of paper mulberry and its binding strings are cotton. SEM-EDS analysis was performed to verify the existence of additives in paper. As a result of the analysis, The crystallized calcium was detected in addition to the main components carbon(C) and oxygen(O). This artifact is the unique final version of "The collection of Yi Chungmugong", which has considerable value in terms of academic research, besides it helps to understand how to print books of Joseon Dynasty. And it also has a very accurate information of when and where the book was made, which primarily could be resources to conserve and restore for other book heritage.

• The Korea Journal of Herbology
• /
• 제23권2호
• /
• pp.41-49
• /
• 2008

Objectives : In order to distinguish morphological characteristics of trunk bark and root bark of Ulmus davidiana var. japonica (Rehder) Nakai and the trunk bark and root bark of Hemiptelea davidii Planchon were sampled and compared in terms of their external and internal features with flour states according to their medical use, through microscopic examination. Methods : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and the flour of it was mounted by the liquid made by the same ratio of each of glycerin, acetic acid, and water, and then observed and photographed by olympus-BHT. Results : 1. Internal Features 1) A large parenchymatous cell was observed in the phloem of the slice of both trunk bark and root bark of Ulmi Cortex. However, both of the trunk bark and root bark of Hemipteleae Cortex did not have parenchymatous cell in the phloem; instead, stone cells including much square crystal of calcium oxalate were distributed around fiber bundle, and the parenchymatous cell included much druse crystal of calcium oxalate. 2) In both the Ulmi Cortex and Hemipteleae Cortex, rhytidome was observed in trunk bark, but not in root bark, but in the parenchymatous cell of the root bark of the Ulmi Cortex contained starch grain. 2. Flour States 1) In the flour of root bark of the Ulmi Cortex, a large parenchymatous cell was observed. However, in the flour of trunk bark and root bark of Hemipteleae Cortex, no parenchymatous eel was found; instead, stone cell including square crystal of calcium oxalate and druse crystal of calcium oxalate were observed. 2) There was no remarkable difference between the trunk bark and root bark of Hemipteleae Cortex. However, starch grain was contained in the parenchymatous cell of the root bark of Ulmi Cortex but not in the trunk bark of it. Conclusions : There were some morphological differences in external, internal, and flour parts of Ulmi Cortex and Hemipteleae Cortex. In particular, there was a morphological difference in flour states between the trunk bark and root bark of Ulmi Cortex, it is possible to use microscope to distinguish their flour states.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제32권1A호
• /
• pp.11-18
• /
• 2012

This paper deals with the numerical determination of the stress intensity factors of cracked aluminum plates under the mixed mode of $K_I$ and $K_{II}$ in glass-epoxy fiber reinforced composites. For the stress intensity factors, two different models are reviewed such as VCCT and two-step extension method. The p-convergent partial layerwise model is adopted to determine the fracture parameters in terms of energy release rates and stress intensity factors. The p-convergent approach is based on the concept of subparametric element. In assumed displacement field, strain-displacement relations and 3-D constitutive equations of a layer are obtained by combination of 2-D and 1-D higher-order shape functions. In the elements, Lobatto shape functions and Gauss-Lobatto technique are employed to interpolate displacement fields and to implement numerical quadrature. Using the models and techniques considered, effects of composite laminate configuration according to inclined angles and adhesive properties on the performance of bonded composite patch are investigated. In addition to these, the out-of-plane bending effect has been investigated across the thickness of patch repaired laminate plates due to the change of neutral axis. The present model provides accuracy and simplicity in terms of stress intensity factors, stress distribution, number of degrees of freedom, and energy release rates as compared with previous works in literatures.