• Structural Engineering and Mechanics
• /
• 제37권1호
• /
• pp.111-129
• /
• 2011

This paper presents a nonlinear analysis of reinforced concrete column with lap splice confined by FRP wrapping in the critical hinging zone. The steel stress-slip model derived from the tri-uniform bond stress model presented in the companion paper is included in the nonlinear frame analysis to simulate the response of reinforced concrete columns subjected to cyclic displacement reversals. The nonlinear modeling is based on a fiber discretization of an RC column section. Each fiber is modeled as either nonlinear concrete or steel spring, whose load-deformation characteristics are calculated from the section of fiber and material properties. The steel spring that models the reinforcing bars consists of three sub-springs, i.e., steel bar sub-spring, lap splice spring, and anchorage bond-slip spring connected in series from top to bottom. By combining the steel stress versus slip of the lap splice, the stress-deformation of steel bar and the steel stress-slip of bars anchored into the footing, the nonlinear steel spring model is derived. The analytical responses are found to be close to experimental ones. The analysis without lap splice springs included may result in an erroneous overestimation in the strength and ductility of columns.

• Journal of the Optical Society of Korea
• /
• 제3권2호
• /
• pp.55-63
• /
• 1999

For the precise analysis and design of LPFG's, a new method of generalized N$\times$N coupled-mode theory by section-wise discretization was proposed. This is applicable to the analysis for arbitrary grating structures, which can readily take grating nonuniformities and multimode couplings into account. Utilizing the method, several analyses of LPFG's were presented, and relationships between the grating structures and their spectral responses were discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.939-941
• /
• 2017

항공우주 구조물은 경량화를 위하여 복합재의 사용이 증가하고 있다. 이러한 구조물 중 추진기관에 해당하는 발사체 동체의 링 프레임 및 부품은 구조적 파손에 덜 취약한 섬유 강화 복합재를 주로 사용한다. 섬유 강화 복합재의 사용이 증가함에 따라 강성 및 강도의 효율적인 설계 방법에 대한 관심이 높아지고 있다. 본 논문에서는 섬유 강화 복합재 중 2차원 3축 브레이딩 복합재의 단위 체적 형상(Repeating Unit Cell, RUC)에 따른 기계적 강도를 예측하였다. 강도 예측 기법으로 섬유다발의 이산화 기법를 통한 섬유조각(Yarn Slice) 정의, 증분 접근법, 강성저하 모델 등을 사용하였다. 마지막으로 예측된 강도와 시험결과를 비교하여 본 논문에서 정의한 예측 기법의 정확도를 검증하였다.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.577-585
• /
• 2006

본 연구에서는 비선형 전단변형을 고려할 수 있는 Timoshenko보 이론을 정식화 하였다. 제안된 모델은 전단변형을 고려하므로서 짧은 기둥이나 전단 지배 기둥에서 일반적인 Bernoulli보 이론 보다 합리적인 결과를 보여준다. 단면은 층상화 모델을 이용하였으며, 층상화 단면 모델은 단면을 분활하여 소성화 진행과정을 관찰할 수 있으며 축력과 모멘트의 상호작용을 알 수 있다. 정식화한 요소는 일반적인 철근 콘크리트 부재의 해석을 위해 유한요소 프로그램에 적용하였다. 철근콘크리트 기둥의 해석을 실험결과와 비교하였고, 철근콘크리트 기둥에 대한 거동특성을 분석하였다.

• Geomechanics and Engineering
• /
• 제4권3호
• /
• pp.173-190
• /
• 2012

With recent growing interests in the Performance-Based Seismic Design and Assessment Methodology, more realistic modeling of a structural system is deemed essential in analyzing, designing, and evaluating both newly constructed and existing buildings under seismic events. Consequently, a shallow foundation element becomes an essential constituent in the implementation of this seismic design and assessment methodology. In this paper, a contact interface fiber section element is presented for use in modeling soil-shallow foundation systems. The assumption of a rigid footing on a Winkler-based soil rests simply on the Euler-Bernoulli's hypothesis on sectional kinematics. Fiber section discretization is employed to represent the contact interface sectional response. The hyperbolic function provides an adequate means of representing the stress-deformation behavior of each soil fiber. The element is simple but efficient in representing salient features of the soil-shallow foundation system (sliding, settling, and rocking). Two experimental results from centrifuge-scale and full-scale cyclic loading tests on shallow foundations are used to illustrate the model characteristics and verify the accuracy of the model. Based on this comprehensive model validation, it is observed that the model performs quite satisfactorily. It resembles reasonably well the experimental results in terms of moment, shear, settlement, and rotation demands. The hysteretic behavior of moment-rotation responses and the rotation-settlement feature are also captured well by the model.

• Computers and Concrete
• /
• 제16권5호
• /
• pp.683-701
• /
• 2015

When approached using nonlinear finite element (FE) techniques, structural analyses generate, for real RC structures, large complex numerical problems. Damage is a major part of concrete behavior, and the discretization technique is critical to limiting the size of the problem. Based on previous work, the ${\mu}$ damage model has been designed to activate the various damage effects correlated with monotonic and cyclic loading, including unilateral effects. Assumptions are formulated to simplify constitutive relationships while still allowing for a correct description of the main nonlinear effects. After presenting classical 2D finite element applications on structural elements, an enhanced simplified FE description including a damage description and based on the use of multi-fiber beam elements is provided. Improvements to this description are introduced both to prevent dependency on mesh size as damage evolves and to take into account specific phenomena (permanent strains and damping, steel-concrete debonding). Applications on RC structures subjected to cyclic loads are discussed, and results lead to justifying the various concepts and assumptions explained.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1237-1258
• /
• 2015

This paper proposes a simple inelastic analysis approach to efficiently map out the complete nonlinear post-collapse (strain-softening) response and the maximum load capacity of axially loaded concrete encased steel composite columns (stub and slender). The scheme simultaneously incorporates the influences of difficult instabilizing phenomena such as concrete confinement, initial geometric imperfection, geometric nonlinearity, buckling of reinforcement bars and local buckling of structural steel, on the overall behavior of the composite columns. The proposed numerical method adopts fiber element discretization and an iterative M${\ddot{u}}$ller's algorithm with an additional adaptive technique that robustly yields solution convergence. The accuracy of the proposed analysis scheme is validated through comparisons with various available experimental benchmarks. Finally, a parametric study of various key parameters on the overall behaviors of the composite columns is conducted.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.62-69
• /
• 2011

This paper presents a new simple two-dimensional frame finite element able to accurately estimate the load-carrying capacity of reinforced concrete beams flexurally strengthened externally bonded fiber reinforced polymer (FRP) strips and plates. The proposed analysis model considers distributed plasticity with layer-discretization of the cross-sections and the bond-slip behavior of epoxy layer. The proposed model is used to predict the load-carrying capacity and the applied load-midspan deflection response of RC beams subjected to bending loading. Numerical simulations and experimental measurements are compared based on numerous tests available in the literature and published by different authors. The numerically simulated response agree remarkably well with the corresponding experimental results. Thus, the proposed model is suitable for efficient and accurate modeling and analysis of flexural strengthening of RC beams with externally bonded FRP sheets/plates and for practical use in design-oriented parametric studies.

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.265-281
• /
• 2024

The sound radiation responses of multi-layer composite plates subjected to harmonic mechanical excitation in hygrothermal environment is numerically investigated. A homogenized micromechanical finite element (FE) based on the higher-order mid-plane kinematics replicating quadratic function as well as the through the thickness stretching effect together with the indirect boundary element (IBE) scheme has been first time employed. The isoparametric Lagrangian element (ten degrees of freedom per node) is used for discretization to attain the hygro-thermo-elastic natural frequencies and the modes of the plate via Hamilton's principle. The effective material properties under combined hygrothermal loading are considered via a micromechanical model. An IBE method is then implemented to attain structure-surrounding coupling and the Helmholtz wave equation is solved to compute the sound radiation responses. The effectiveness of the model is tested by converging it with the similar analytical/numerical results as well as the experimentally acquired data. The present scheme is further hold out for solving diverse numerical illustrations. The results revealed the relevance of the current higher-order FE-IBE micromechanical model in realistic estimation of hygro-thermo-acoustic responses. The geometrical parameters, volume fraction of fiber, layup, and support conditions alongside the hygrothermal load is found to have significant influence on the vibroacoustic characteristics.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권4호
• /
• pp.1-8
• /
• 2013

철근콘크리트 구성요소에 대한 비탄성 거동 모델 개발은 철근콘크리트 구조물에 대한 성능기반 내진평가의 정밀도 향상에 있어 매우 중요한 요소로 본 연구에서는 지진과 같은 불규칙 반복 하중에 대한 철근콘크리트 구조물의 비선형 동적응답을 예측함에 있어 콘크리트 구성모델의 특성에 따른 민감도를 고찰하고자 하였다. 해석결과에 따르면 구속된 코어 콘크리트 모델과 일반 콘크리트의 구성모델은 동적응답에 큰 영향을 끼치지 않았으나 철근의 경우에 층간변위와 관련하여 구성모델에 따른 동적거동은 매우 민감하게 응답하는 것으로 나타났으며, 몇 개 층에서의 층간변위는 그 차이가 철근 구성모델 선택에 따라 2배 이상 차이 나는 것으로 나타났다. 따라서 Non-ductile과 Ductile 골조 공히 비선형 동적해석을 수행하는데 있어 정밀한 철근 구성모델의 선택은 매우 중요한 것으로 사료된다.