• Fibers and Polymers
• /
• 제3권2호
• /
• pp.73-79
• /
• 2002

Nanoscaled PVA fibers were prepared by electrospinning. This paper described the electrospinning process, the processing conditions fiber morphology, and some potential applications of the PVA nato-fibers. PVA fibers with various diameters (50-250 nm) were obtained by changing solution concentration, voltage and tip to collector distance (TCD). The major factor was the concentration of PVA solution which affected the fiber diameter evidently. Increasing the concentration, the fiber diameter was increased, and the amount of beads was reduced even to 0%. The fibers were found be efficiently crosslinked by glyoxal during the curing process. Phosphoric acid was used as a catalyst activator to reduce strength losses during crosslinking. Scanning electron micrograph (SEM) and differential scanning calorimetric (DSC) techniques were employed to characterize the morphology and crosslinking of PVA fibers. It was fecund that the primary factor which affected the crosslinking density was the content of chemical crosslinking agent.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1080-1088
• /
• 1993

The residue compounds of sulfuric acid-carbon fiber system were obtained from P100, M40, TZ307, and T300 fibers. The fibers which easily formed intercalation compound had small change of d002 value, but, large change of diameter of fiber. It was considered that the cracks in carbon fiber were due to the this conflicting result. The resistivities of residue compound of carbon fibers were increased with the large change of diameter of fibers. It is thought that the reason of our results is increasing defects such as crack in fibers. From the UV reflection spectra, it was found that reflectances of residue compounds were all decreased and the residue compounds were more stable than intercalation compounds.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.221-225
• /
• 2018

We suggested the use of miniature hollow glass tubes having high ultraviolet (UV) transmission characteristics for the protection of optical-fiber-type UV sensors. We have recently proposed a highly sensitive optical sensor in the UV spectral range, using a fiber Bragg grating (FBG) coated with an azobenzene polymer as the photoresponsive material. In this study, we used UV-transparent miniature glass tubes to protect the etched FBG with the azobenzene polymer coating. This technique will be very useful for protecting various fiber-based UV sensors.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1989년도 제2차 학술발표초록집
• /
• pp.91-91
• /
• 1989

• Composites Research
• /
• 제16권2호
• /
• pp.18-25
• /
• 2003

나일론6 단섬유를 보강한 NR과 SBR의 인장특성에 대해 섬유 종횡비(AR), 직경비(DR), 계면상 조건, 그리고 섬유 함유률을 함수로 연구하였다. 인장강도는 우수한 계면조건에서 AR(20min.)이 증가할수록 증가하였다 단섬유(DR=3, AR=20min.) 강화 SBR은 모든 계면조건에서 희석효과를 보이지 않았다. 동일한 단섬유를 보강한 NR의 경우도 No Coating을 제외하고는 희석효과를 보이지 않았다. 인장탄성률은 동일한 직경비에서 AR이 증가할수록, 섬유 함유률이 높을수록. 계면조건이 우수할수록 크게 증가하였다. 동일한 직경비에서 계면조건이 우수할수록 이탈 힘은 크게 나타났다. 또한 단섬유 강화 메커니즘을 확인하기 위해 축대칭 모델을 이용 응력해석을 실시하였다. 본 연구를 통해 AR, 계면상 조건. 그리고 DR이 강화고무의 인장특성에 중요한 역할을 항을 확인하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.45-46
• /
• 2003

A process control system has been developed for measurement and characterization of the nanofiber web qualities. The nano-fiber information system (NAFIS) developed consists of a measurement device and an analysis algorithm, which are a microscope-laser sensor fusion system and a process information system, respectively. It has been found that NAFIS is so successful in detecting irregularities of pore and diameter that the resulting product has been quitely under control even at the high production rate. Pore distribution, fiber diameter and mass uniformity have been readily measured and analyzed by integrating the non-contact measurement technology and the random function-based time domain signal/image processing algorithm. Qualifies of the nano-fiber webs have been revealed in a way that the statistical parameters for the characteristics above are calculated and stored in a certain interval along with the time-specific information. Quality matrix, scale of homogeneity is easily obtained through the easy-to-use GUI information. Finally, ANFIS has been evaluated both for the real-time measurement and analysis, and for the process monitoring.

• 한국의류산업학회지
• /
• 제14권3호
• /
• pp.472-477
• /
• 2012

The conditions of wet spinning were considered in order to prepare the fine denier of acrylic fiber. Polyacrylonitrile copolymer was synthesized by the copolymerization of acrylonitrile (AN) and methyl acrylate (MA) initiated by an aqueous sulfite-chlorate redox system. Acrylic fiber was manufactured through wet-spinning in a dimethyl formamide (DMF) system. The conditions of wet-spinning were investigated by i-value, spinning speed, diameter of spinneret, draw ratio, water content of spinning dope and morphology of protofiber. The physical properties of fibers were investigated by Instron. In this experiment, the minimum i-value decreased with the decreasing spinneret diameter, an increased spinning speed, and an increased coagulation bath (CBC) concentration. The maximum draw ratio increased with an increased CBC. The optimum CBC and water content of the spinning dope were 60%-65% and 3.5%, respectively. The tenacity at the breaking point increased with a decreased fineness of fiber. The elongation at breaking point was almost the same value as a function of the fineness of fiber.

• Smart Structures and Systems
• /
• 제24권2호
• /
• pp.157-171
• /
• 2019

This study investigated the effects of the geometric parameters of superelastic shape memory alloy (SE SMA) fibers on the pullout displacement recovering and self-healing capacity of reinforced cementitious composites. Three diameters of 0.5, 0.7 and 1.0 mm and two different crimped lengths of 5.0 and 10.0 mm were considered. To provide best anchoring action and high bond between fiber and cement mortar, the fibers were crimped at the end to create spear-head shape. The single fiber cement-based specimens were manufactured with the cement mortar of a compressive strength of 84 MPa with the square shape at the top and a dog-bone shape at the bottom. The embedded length of each fiber was 15 mm. The pullout test was performed with displacement control to obtain monotonic or hysteretic behaviors. The results showed that pullout displacements were recovered after fibers slipped and stuck in the specimen. The specimens with fiber of larger diameter showed better displacement recovering capacity. The flag-shaped behavior was observed for all specimens, and those with fiber of 1.0 mm diameter showed the clearest one. It was observed that the length of fiber anchorage did not have a significant effect on the displacement recovery, pullout resistance and self-healing capacity.

• Steel and Composite Structures
• /
• 제47권6호
• /
• pp.679-691
• /
• 2023

The application of short, fiber-reinforced polymer composite pipes has been increasing rapidly. A comprehensive review of the prior research reveals that the majority of the previously-reported studies have been conducted on the filament-wound composite pipes, and fewer studies have been reported on the mechanical behavior of short, randomly-oriented fiber composite pipes. On this basis, the main objective of this research endeavor is to investigate the mechanical behavior and failure modes of short, randomly-oriented glass-fiber composite pipes under three-point bending tests. To this end, an experimental study is performed in order to explore the load-bearing capacity, failure mechanism, and deformation performance of such pipes. Fourteen properly-instrumented composite pipe specimens with different diameters, thicknesses, lengths, and nominal pressures have been tested and also simulated using the finite element approach for verification purposes. This study demonstrates the effectiveness of the diameter-to-thickness ratio, length-to-diameter ratio, and nominal pressure on the mechanical behavior and deformation performance of short, randomly-oriented glass-fiber composite pipes.

• 한국추진공학회지
• /
• 제25권6호
• /
• pp.74-86
• /
• 2021

복합재 격자구조체는 요구 하중을 최소한의 무게 및 두께로 지지하는 구조체로, 고강도 탄소섬유에 에폭시 수지를 함침시켜 필라멘트 와인딩 공법으로 제작된다. 구조적으로 반드시 필요한 부분만을 적층 및 제작하므로 항공기 동체, 위성발사체 및 유도무기 등에 적용하여 경량화를 극대화 할 수 있다. 본 논문에서는 대형 원통형 및 콘형 복합재 격자구조체의 설계, 해석, 제작 및 평가까지 전 순기에 해당하는 복합재 격자구조체 개발 및 평가를 수행하였다. 실제 발사체 및 유도무기에 적용이 가능하도록 직경 2,600 mm, 길이 2,000 mm의 원통형 격자구조체와 상단 직경 1,300 mm, 하단 직경 2,500 mm, 길이 900 mm의 콘형 격자구조체를 개발하였으며, 하중시험을 통해 대형 복합재 격자구조체의 성능을 평가하였다.